• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.159-165
• /
• 2021

YSZ based anode supported solid oxide fuel cells (SOFCs) were prepared, and two cells with different electrolyte thicknesses were connected in series for the simulation of a cell-imbalanced fuel cell stack. Pure YSZ cells in a series connection exhibited a rapid degradation when a thick electrolyte cell was operated under a negative voltage. On the other hand, ceria added-YSZ cells in a series connection were stable under similar operating conditions, and the power density and impedance were about the same as those before tests. The improved stability was due to the reduction of internal partial pressure in the electrolyte by locally increasing the electronic conduction. Thus, we propose a new protection method, i.e., the local addition of ceria in the YSZ electrolyte, to extend the lifetime of a cell-imbalanced SOFC stack.

• Journal of Korean Foot and Ankle Society
• /
• v.5 no.2
• /
• pp.120-128
• /
• 2001

Purpose: This study was undertaken to review the precise morphological patter'ns of polydactyly of the foot and to evaluate outcomes of surgical interventions. Materials and Methods: The records of patients who had polydactyly of foot from 1983 to 2000 were reviewed retrospectively. 29 duplicated toes(24 patients) were analyzed. All cases were evaluated and classified with Temtamy and McKusick's axial pattern, Watanabe's morphologic pattern and level of duplication. Clinical evaluation was performed according to Phelps and Grogan's. Mean age at surgery was 5.7 years(range: 10 months$\sim21$ years). All the patients were subsequently evaluated during mean 17 months(range: 13 months-$\sim5$ years). Results: Preaxial polydactyly was seen in 3 cases, central polydactyly in 3 cases, postaxial polydactyly in 22 cases and remaining 1 case was multiple my involvement. Only 2 patients have familial history and the most common associated anomaly was hand deformity(20.8%). Clinical results were excellent in 14 cases, good in 5 cases, poor in one. 17 patients(70%) were operated before 6 years olds and they had better results than those of who were operated after 6 years olds. Conclusion: The Method of surgical correction for the polydactyly should be individualized by its morphological pattern because the purpose of operation was to give comfort in wearing shoes and patient's psychological relief. This study showed that polydactyly of the foot could be corrected surgically with good results in most cases, and the better results would be achieved if the operation is performed before preschool age according to its individualized pattern of duplication.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.3
• /
• pp.97-105
• /
• 2007

This study was conducted to compare the performances of acidogenic fermentation and hydrogen fermentation using bench-scale leaching-bed reactors for organic solid waste. Acidogenic fermenters were operated with dilution rates (D) of 2.0, 3.0 and $4.0d^{-1}$ after employing anaerobic sludge and hydrogen fermenters were operated with D of 2.0, 4.0 and $6.0d^{-1}$ after employing heat-treated anaerobic sludge. The highest chemical oxygen demand (COD) conversion efficiency (56.2%) was obtained in acidogenic fermentation with D of $3.0d^{-1}$. Only volatile fatty acid (VFA) was produced as a metabolite. On the other hand, hydrogen fermentation did not show higher COD conversion efficiency (49.3%) than acidogenic fermentation, but it produced hydrogen gas (5.1% of total COD) which was a clean and environmentally friendly fuel with a high energy yield. Therefore, either acidogenic fermentation or hydrogen fermentation could be applied to organic solid waste depending on the purpose of treatment, which could maximize the economics of anaerobic treatment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1313-1317
• /
• 2013

With increasing demand of power, the equipment of power system is enlarging and the absolute capacity is going up. As a result, when a fault occurs, the fault current is consistently increasing. Therefore, I suggested some solution for limiting the fault current more efficiently. This study shows the characteristics of superconducting limiting elements and normal conducting elements combined with a transformer. We performed a short-circuit test about the fault current by using SCR switching control system operated from a CT. When short circuit accidents happened in the secondary side of a transformer, fault currents flowed and a SCR switching control system was operated. It resulted in a decrease of the fault current in the limited elements of third winding connected in parallel. For this test, we used YBCO thin films and normal conducting elements as the limited elements. Within a cycle, a superconducting fault current limiter with YBCO thin films reduced more than 90% of fault current because the resistance of superconducting elements sustainedly grew. On the other hand, the limiter with normal conductors limited as much as a set value because its resistance characteristic was linear. Consequently, in case of the limiter with superconductor, limiting range of the circuit was wide but the range of protective detection was undefined. In contrast, as for the limiter with normal conductors, limiting range and protection duty were appropriate.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.492-505
• /
• 2007

Currently, most procedures in domestic facility management systems are performed by hand. However, these manually operated facility management systems involve critical limitations, such as a waste of manpower to store collected data into a database, intentional or accidental loss of data consistency (mainly due to a lack of the ability to recognize and deal with frequent changes of facility status in realtime), and so on. To overcome the limitations of such manually operated facility management systems, the following capabilities must be supported. First, the changes in facility status must be recognized in realtime. Second, the data collection process must be secure and reliable to prevent fabrication of collected data and preserve data integrity. Third, the data collection devices must be portable to help the manager collect data about their facilities. To address these problems, we design and implement a novel facility management system using portable RFID, which is designed to support these functionalities and thus help reduce administrative costs. Through extensive experiments, we observed that our system improved the accuracy and reliability of facility check process and helped cut administrative costs by significantly reducing failure frequency.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.480-488
• /
• 2000

Cabbage is the most important vegetables in korea. The cabbage production was based on arduous human labor. A comprehensive research for substituting the human work by machines has been performed at present. In general, cabbage is cultivated on hillside in korea. The harvested cabbage in a field and carrying it to a vehicle for transportation are very laborious work. Hand labor in cabbage transportation to the market damages the quality of cabbage and is also a cause to increase the cost of cabbage production. This study was to design and evaluate a prototype cabbage loader for deserving efficient and safe transportation of cabbage. The developed cabbage loader was a semi-tracked vehicle operated by a hydraulic system, allowing the safe transporting and the loading of cabbage in a steep field. The maximum loading capacity of the loader was 1.0 ton. By using safety devices attached to the loader, the static slopes were 34.0% and 37.4% for the left and the rear roll-over, respectively. The maximum field speed was about 6km/hr with two cabbage pallets of 750kg at a 25% inclined field. The field capacity was about 35 pallets/hr in case of picking up, carrying and unloading two cabbage pallets. The field efficiency of the loader was analyzed to be more than 8 times in comparison of the conventional human labor. The developed loader would be applied for loading and carrying the other vegetables due to the similarity of operations. The study suggested a standard approach to the design of field machines operated in a steep field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1205-1211
• /
• 2012

A marionette is a moving puppet that can be made to perform several actions by pulling wires connected to the puppet. Because a marionette is operated by hand, a stage performance with a human-sized marionette is impossible. However, a marionette robot operated using a wire controller could be used as a human-sized marionette to conduct a stage performance with other robots or actors. In addition, by using mobile stages that utilize mobile platforms, a wire controller, and the marionette robot body, the large marionette robot system designed in this study can be made to rotate and translate freely in a stage performance. The feasibility of the structure of the marionette robot wire control system is verified by using dynamics analysis. Furthermore, the efficiency and safety of the robot is demonstrated by manufacturing and operating a prototype robot.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4742-4748
• /
• 2014

A semi-automatic clutch was developed for drivers of vehicles with manual transmission. The clutch is operated by pressing a switch on the gear stick without stepping on a clutch pedal when the driver wants to shift gears. To automatic control a clutch, driving information is provided by sensors installed under the vehicle. On the other hand, sensors are prone to failure under severe driving conditions and a long time is needed to install or repair these sensors in the vehicle. In this paper, a semi-automatic clutch that received driving information by CAN communication from the ECU was developed and a pneumatic actuator was used to operate the clutch. The semi-automatic clutch by a pneumatic cylinder was operated with a supply air pressure of more than 3bar.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.358-365
• /
• 2011

Recently, the LED(Light Emitting Diode) replacing incandescent light bulbs and fluorescent light has great attentions as a most promising candidate for the next generation lighting source due to its environment-friendly characteristics, long life and excellent efficiency. Moreover, since it is a semiconductor device which can convert the electric energy to visible light at a very high speed, it can also used as a communication device. Therefore, the VLC(Visible Light Communication) using the LED can perform the near field communication and lighting function at the same time without additional expenses. However, since the switching device of the conventional LED driver for VLC is operated in the linear region, there exist several drawbacks such as a poor power conversion efficiency and serious heat generation. On the other hand, since the proposed driver is operated in the on/off switching region, it features a higher efficiency and more improved heat generation. To verify the validity of the proposed LED driver, experimental results from a prototype of 20W rated LED driver applied to 3MHz bps broadcasting audio system are given.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.2
• /
• pp.247-254
• /
• 2021

Objective : The subaxial cervical pedicle screwing technique shows powerful biomechanical properties for posterior cervical fusion. When applying a pedicle screw using the freehand technique, it is essential to analyse cervical computed tomography and plan the surgery accordingly. Normal cervical computed tomography is usually performed in the supine position, whereas during surgery, the patient lies in a prone position. This fact leads us to suppose that radiological evaluations may yield misleading results. Our study aimed to investigate whether there is any superiority between preoperative preparation on computed tomography performed in the prone position and that performed in the supine position. Methods : This study included 17 patients (132 pedicle screws) who were recently operated on with cervical vertebral computed tomography in the prone position and 17 patients (136 pedicle screws) who were operated on by conventional cervical vertebral computed tomography as the control group. The patients in both groups were compared in terms of age, gender, pathological diagnosis, screw malposition and complications. A screw malposition evaluation was made according to the Gertzbein-Robbins scale. Results : No statistically significant difference was observed between the two groups regarding age, gender and pathological diagnosis. The screw malposition rate (from 11.1% to 6.9%, p<0.05), mean malposition distance (from 2.18 mm to 1.86 mm, p <0.05), and complications statistically significantly decreased in the prone position computed tomography group. Conclusion : Preoperative surgical planning by performing cervical vertebral computed tomography in the prone position reduces screw malposition and complications. Our surgical success increased with a simple modification that can be applied by all clinicians without creating additional radiation exposure or additional costs.