• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.799-803
• /
• 1991

This study proposes a CIM shell that is consisted with computers connected by a LAN. Since this system excludes production hardwares, physical movements of devices are represented by computer simulation. On the other hand, softwares that dictate system operation are real, and consu- me physical time. Thus the shell becomes half-real-half-simulation that requires events synchronization mechanism. This study shows the building procedure of such shell as well as an example of application of the shell.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.11-18
• /
• 1998

In grinding operations, one of the most important problems is to increase efficiency of process. In order to achive this purpose, it is necessary to administer the tool life of grinding wheel and to optimize grinding conditions. Frequently dressing result in lowering the process efficiency remarkably and makes production cost high. On the other hand, grinding with a worn wheel causes the workpiece surface roughness to increase and often results in the occurrence of such troubles as chatter vibration and burning.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.324-328
• /
• 2002

Recently, in machining industry much progress has been made by taking advantage of high speed machining. On the other hand as disadvantage high speed machining involves shortening the life of cutting tool. In this research we want to evaluate the performance of appropriate endmill for high speed machining in accordance with surface roughness of land width and clearance angle of flat-endmill

• 문화기술의 융합
• /
• 제10권4호
• /
• pp.645-661
• /
• 2024

오늘날 4차 산업 혁명에 따른 새로운 기술의 발전은 비대면 협업과 같은 업무수행 방식이 요구되고 있다. 이에 부응하여 다양한 VR 협업 툴이 등장하고 있으나 협업이나 디자인 개발 업무에서 활용되고 있는 VR 협업 툴이 제한적이. 따라서 비대면 협업을 위한 VR의 장점과 가능성에도 불구하고 실무 활용에 있어 한계가 있다. 이에 따라 디지털화되고 있는 업무 환경에서 효과적인 협업을 위한 VR 협업 툴 개발이 필요하며 이를 위한 UI 디자인 개발에 관한연구가 요구된다. 본 연구의 목적은 사용자 조사를 통하여 협업 시 첫 단계인 브레인스토밍 단계에서 나타나는 사용자 행동 요소를 적용한 인터랙션 및 UI 디자인을 개발함으로써 VR 협업 툴 프로토타입을 제안하는 데 있다. 본 연구는 질적 연구로 연구 방법은 관찰과 심층 인터뷰를 통한 사용자 조사를 수행하고 이로부터 얻은 데이터를 분석한 결과로 5가지 사용자의 손짓 행동 요소를 도출하였다. 행동 요소로서의 손짓을 반영한 인터랙션 UI를 디자인하고 Unity와 Oculus Integration SDK Kit를 사용하여 컨트롤러 없이 사용할 수 있는 VR 협업 툴 프로토타입을 제작하였다. 본 연구에서 제작한 프로토타입에 대한 사용성 평가를 실시한 결과 사용자가 손짓을 정확히 행하여야 한다는 어려움이 나타나 UI 디자인의 보완점을 찾아볼 수 있었다. 또한 VR 협업 공간에서 개인 작업과 공유를 위한 공간의 구분을 조절할 수 있는 UI 디자인의 필요성도 알 수 있었다. 본 연구가 업무의 효율성을 높여줄 수 있는 VR 협업툴을 위한 인터랙션 및 UI 디자인 개발에 도움이 되기를 기대한다.

• 한국정밀공학회지
• /
• 제31권5호
• /
• pp.431-439
• /
• 2014

Recently, a demand for precision 5-axis machine tools is significantly increasing, and the maintenance of machine tool accuracy becomes more important. it is very difficult to evaluate to accuracy of 5-axis M/C in the production site since it needs expensive measuring equipment and skilled engineer. On the other hand, evaluation items of 5-axis M/C are not systematically organized in the existing KS and ISO standards. In this study, the evaluation items for 5-axis M/C were derived systematically and a test workpiece was developed to evaluate the machine tool accuracy more easily. The error sources of machine tool can be estimated by machining and measuring of the test workpiece. The correlation between the machine tool accuracy and the accuracy of machined test workpiece was analyzed. As a result, the accuracy of machined test workpiece represented the accuracy of machine tool and the error sources very effectively.

• 한국정밀공학회지
• /
• 제1권2호
• /
• pp.41-46
• /
• 1984

The machinability of calicium-deoxidized steel is studied in turning by being compared with that of Fe-Si deoxidized steel under a given set of cutting condition. Tool life, cutting force and cutting mechanism are examined on a few sorts of steel. It is found that adhesive layer "Belag" is developed on the cemented carbide tool and the peak value is observed at the cutting speed of 300m/min followed by gradual increase in the thickness of Belag with the increase of cutting speed. the maximum thickness of Belag is also shown at the feed of 0.3mm/rev. On the other hand, the tool life of carbide tool is more favorable than that of high speed steel (SKH 9) in cutting calcium- deoxidized steel. It is considered that the steel deoxidized with Ca-Si shows better machinability a little than that with Fe-Si. However, the cutting force and the shear angle of the former are similar to those of the latter in turning.n turning.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.217-224
• /
• 1999

Trouble shooting of modern machine tools equipped with sophisticated electronic as well as mechanical parts is so difficult that it is usually depends upon the experience and accumulated knowledge of the diagnosing persons. On the other hand, tool users are scattered in wide area, which makes it expensive for a machine tool maker to run a vast service network. An unmanned diagnosis system to which users can have access at all times could be an efficient alternative. For this purpose, a rule-based expert system for diagnosing machine tools is developed. This paper describes the structure of diagnostic knowledge, the rule firing mechanism, the diagnosis flow, and user query process. An example shows the feasibility of problem solving on site without help of a service expert from machine tool maker.

• 한국정밀공학회지
• /
• 제5권2호
• /
• pp.56-61
• /
• 1988

For the use of computer to store, modify and retieve technical data, GT coding system has been considered as one of the effective methods. Effective data management is important for Computer Intergrated Manufacturing. Based on actual data obtained from a hand-tool maker, a die/tool coding system is developed as an example and its data base is designed susing a linked list structure. It is suggested that industries use this method to make their own data base.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.276-284
• /
• 2009

In this paper, we develop the image transfer remote maintenance monitoring system for hand held device which can compensate defects of human mistake. The human mistakes always happen when the worker communicate information each other to check and maintenance the equipment of the power plant under bad circumstance such as small place and long distance in power plant. A worker couldn't converse with other when in noisy place like Power plant. So, we make some hand device for handy size and able to converse in noisy place. The developed system can have improvement of productivity through increasing plant operation time. And developed system is composed of advanced H/W(hard ware) system and S/W(soft ware)system. The H/W system consist of media server unit, communication equipment with hand held device, portable camera, mike and head set. The advanced s/w system consist of data base system, client pc(personal computer) real time monitoring system which has server GUI(graphic user interface) program, wireless monitoring program and wire ethernet communication program. The client GUI program is composed of total solution program as pc camera program, and phonetic conversation program etc.. We analyzed the required items and investigated applicable part in the image transfer remote maintenance monitoring system with hand held device. Also we investigated linkage of communication protocol for developed prototype, developed software tool of two-way communication and realtime recording skill of voice with image. We confirmed the efficiency by the field test in preventive maintenance of plant power.

• 한국정보전자통신기술학회논문지
• /
• 제9권5호
• /
• pp.511-517
• /
• 2016

손 부위의 인체측정자료는 시용자중심 설계의 관점에서 수부와 관련된 다양한 제품의 설계에 중요한 요소이다. 전통적인 인체치수조사에서 측정자를 사용하는 직접측정법은 측정 시간의 누적, 원천 자료 미확보, 측정자간 신뢰도 등에 대한 단점을 가지고 있다. 이를 보완하기 위한 3D 스캐너는 고비용, 이동성 제한 등의 단점을 가지고 있다. 이러한 단점들을 보완할 수 있는 사진측량법에 의한 손 부위 인체측정자료의 효율적인 수집에 관한 연구를 수행하였다. 직/간접 측정 결과의 비교 과정에서 발생할 수 있는 오차를 최소화하기 위하여 시뮬레이션 환경에서 직/간접 측정을 실시하였다. 사진측량법을 이용한 손 부위 인체치수의 측정 가능성을 확인하였다.