• 한국결정학회지
• /
• 제7권2호
• /
• pp.147-155
• /
• 1996

할로겐 램프를 열원으로 이용하는 결정성장장치인 부유대역융로를 제작하여 고온초전도체 Bi2Sr2CaCu2O8의 성장에 이용하였다. 제작된 결정성장장치는 할로겐 램프를 초점에 위치시키기 위한 holder unit, 1kW의 할로겐 램프로서 최대 1800℃까지 사용이 가능한 image furnace, 냉각장치, 원료 물질을 공급하는 feeding unit, 성장된 단결정을 인상하는 pulling unit, 그리고 2mm/hr - 40mm/hr의 속도로 상하 이동 및 15rpm -120rpm의 회전이 가능한 제어부 등으로 구성되었다. 300W의 할로겐 램프를 이용하여 Bi2Sr2CaCu2O8 fiber를 성장시켰으며 성장된 fiber는 XRD, SEM, EDS 등으로 분석하였다. 성장조건은 공기분위기에서 성장속도 3∼4mm/hr, 상·하부축 회전속도 20∼25 rpm이었으며 성장된 fiber는 Bi2Sr2CaCu2O8 기지 내에 (Sr,Ca)CuO2 및 (Sr,Ca)2CuO3의 2차상을 포함하고 있었다.

• 대한소아치과학회지
• /
• 제32권4호
• /
• pp.611-619
• /
• 2005

본 연구의 목적은 초기 우식 병소에서 광원에 따른 형광효과를 비교하는 것으로 정량 분석형 laser/light 형광법(Quantitative laser/light-induced fluorescence, QLF)을 이용하여 아르곤 레이저광, 할로겐광, 발광다이오드광(LED), 플라즈마광의 형광효과를 비교하였다. 발거된 60개의 치아를 선정한 후, 인공우식용액에 노출되지 않을 부분에 nail varnish를 도포하였고 치아는 24, 48, 72시간 동안 인공우식용액에 보관되었다. 건조 후 QLF영상으로 초기 우식 부위의 광밀도 차이에 의한 탈회정도가 기록되었다. 또한 조영제를 이용하여 동일한 방법으로 실험하였고 다음과 같은 결과를 얻었다 염료를 이용하여 같은 방법으로 실험하여 또 다른 결과를 얻었다. 1. 각 군의 평균 광밀도를 볼 때, 플라즈마광이 세 군 모두에서 다른 광원들 보다 높았다(p<0.05). 2. 세 군 사이에서 평균 광밀도를 비교해 볼 때, 플라즈마광과 할로겐광이 차이를 보였다(p<0.05). 3. 조영제를 사용하였을 경우 평균 광밀도를 비교해 볼 때, 플라즈마광이 세 군 모두에서 다른 광원들보다 높았고 (p<0.05), 발광다이오드광(LED)와 아르곤 레이저광을 제외한 모든 광원이 차이를 보였다(p<0.05). 4. 조영제를 사용하지 않은 경우와 사용한 경우 평균 광밀도를 비교해 볼 때, 사용한 경우에 모든 광원의 평균 광밀도 차이가 컸다.

• 대한전자공학회논문지
• /
• 제25권8호
• /
• pp.950-958
• /
• 1988

We have implemented a RTA system using W-halogen lamps and tried to recrystallize the phosphorus ion implanted amorphous silicon on insultor (SOI) taking advantages of seeding window. The purpose of this study is to investigate the possibility of a typical crystalline orientation occurred during the solidifying process of molten amorphous silicon layer. Experimental results show that several twin boundaries are found on the seeding window region after annealing for 15 sec at 1040\ulcorner. These twin boundaries represent that the recrystallization is partialy possible and when the annealing is done at 1150\ulcorner, (100) etch pits with <110> facets are found on the solidified amorphous silicon layer. Consequently, Hall mobility of recrystallized silicon film is measured and the thermal behavior of grain boundary is also observed by SEM.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2017년도 제55차 동계학술대회논문집 25권1호
• /
• pp.5-6
• /
• 2017

본 논문에서는 초고속 카메라가 아닌 일반 산업용 카메라를 이용하여 기존의 초고속 카메라와 비슷한 성능을 가진 골프 시뮬레이터 시스템을 개발하였다. 골프공 인식 카메라의 특성에 관하여 분석하였고, 사용하는 조명의 특성을 비교하여 카메라특성에 맞는 할로겐 램프를 사용한 조명장치를 설계 제작하였다. 영상처리 알고리즘을 이용하여 공의 속도, 방향, 높이 및 스핀을 계산하여 모니터에 디스플레이 하였다. 또한 게임 프로그램적인 요소를 반영하여 실제 데모용 키오스크 시스템을 구현하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.111-113
• /
• 2003

The existing heating unit is indirect-heating method that make use or the nichrome wire or halogen lamp. The indirect-heating method has the demerits of long warming time, high power consumption and many organization parts. In this study, the heating unit of direct-heating method manufactured as being the thermal spray coating of conductive heating material on the surface of heating unit in order to improve the demerits of indirect-heating method. And YSZ added Ni-20Cr that had moderate electrical resistivity was chosen of the conductive heating material.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.147-148
• /
• 2000

Sealing of two glass plates composing of FED panel was done in a vacuum chamber. Several factors related with a heating process of a frit glass were investigated, including comparisons with a conventional method.

• 한국환경과학회지
• /
• 제6권1호
• /
• pp.75-88
• /
• 1997

The rates of photodegradation, reactivities, and mechanisms of photooxidation for the aqueous solution containing with halogen derivatives of aliphatic hydrocarbons have been discussed with respect to the kinds of photocatalysts, concentration of photocatalytlc suspensions, strength of radiant power, time of illumination, changes of pH of substrate solution, wavelength of radiation, and pressure of oxygen gas saturated In the solution. These aqueous solutions suspended with 0.5 $gL^{-1}$ $TiO_2$ powder have been photodecomposed in the range of 100 and 93.8% per 1 hour if it is illuminated with wavelength (λ $\geq$ 300nm) produced from Xe-lamp(450W). The photocatalytic abilities have been increased In the order of $Fe_2O_3$ < CdS < $CeO_2$ < Y_2O_3$ <$TiO_2$, and rates of photodegradation for the solution have maldmum values in the condition of pH 6 ~ 8 and 3 psi-$O_2$ gL^{-1}$. These rates for the Photoolddation Per 1 hour were dependent on the size of molecular weight and chemical bonding for organic halogen compounds and the rates of photodegadation were increased in the order of $C_2H_5Br$ < CH_2Br_2$ < C_5H_11Cl C_2H_4Cl_2$ < tracts-$C_2H_2Cl_2$ < cis-C_2H_2Cl_2$ The T_{1/2}$ and t99% for these solutions were 5~21 and 40~90 minutes. respectively, and these values were coincided with Initial reaction kinetics(ro). It was found that reaction of photodegradation has the pseudo first-order kinetics controlled by the amount of $h^+_{VB}$ diffused from a surface of photocatalysts.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.55-56
• /
• 2008

The photo leakage currents of a conventional hydrogenated amorphous silicon(a-Si:H) thin film transistor(TFT) were investigated and analyzed in the case of illumination from various lightsources such as halogen lamp, cold cathode fluorescent lamp(CCFL) backlight, and white light emitting diode(LED) backlight The photo leakage characteristics showed the apparent differences in the leakage level and in the $I_{on}/I_{off}$ ratio in spite of the similar luminances of light sources. This leakage level is expected to be related to the wavelength of the lowest intensity peak from spectral analysis of light sources.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.25-32
• /
• 2010

Compared to general lighting method, the lighting system that uses optic fiber can provide only the visible light of good quality to subject by eliminating ultraviolet ray and infrared ray. Thanks to this merit, it is possible to prevent the hard phenomenon of subject caused by ultraviolet ray and infrared ray and to provide the agreeable light environment. This study developed indoors illumination system of high color rendering on the basis of plastic optic fiber with excellent optical property and processing to substitute halogen lamp which has been used for excellent color rendering in spite of low efficiency and short life. Producing pilot product of the designed illumination system and evaluating the property of electric and optical property, ultraviolet ray radiation quantity and temperature property, this study verified the excellence of suggested lighting system of plastic optic fiber.

• 대한기계학회논문집A
• /
• 제33권9호
• /
• pp.969-975
• /
• 2009

In this paper, bonded wafer analysis system is proposed using laser beam transmission; while the transmission model is derived by simulation. Since the failure of bonded wafer stems in void existence, transmittance deviations caused by the thickness of the void are analyzed and variations of the intensity through the void or defect easily have been recognized then the testing power has been increased. In addition, large screen display on laser study has been done which resulted in acquiring a feasible technique for analysis of the whole bonding surface. In this regard, three approaches are demonstrated in which Halogen lamp, IR lamp and laser have been tested and subsequently by results comparison the optimized technique using laser has been derived.