• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.453-456
• /
• 1998

The electrical properties of $Si_{1-x}Ge_{x}$ samples have been investigated. The sample structures were grown by MBE (molecular geam epitaxy) with Ge mole-fraction of x=0.0, x=0.05, x=0.1, and x=0.2. To examine the influence of the thermal processing, the $O_{2}$ and N$_{2}$ process were performed at 800[.deg. C] and 900[.deg. C], respectively. After this thermal process, hall measurements have been done over a wide range of the ambient temperature between 320[.deg. K] and 10[.deg. K] to find the temperature dependence using the comparessed-He gas system. The Ge-rich layer has been formed at the $SiO_{2}$/SiGe interface and it has an effect on the hall mobility. And it has been found that hall mobility was increased by the $N_{2}$ annealing process comparing with dry oxidation process at both 800[.deg.C] and900[.deg. C].

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.569-579
• /
• 2006

In the present study, the unsteady Couette flow with heat transfer of a dusty viscous incompressible electrically conducting fluid under the influence of an exponential decaying pressure gradient is studied without neglecting the Hall effect. The parallel plates are assumed to be porous and subjected to a uniform suction from above and injection from below while the fluid is acted upon by an external uniform magnetic field is applied perpendicular to the plates. The governing equations are solved numerically using finite differences to yield the velocity and temperature distributions for both the fluid and dust particles.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.266-272
• /
• 2014

This study proposes a closed-loop shaping control method with $H_{\infty}$ optimization for optical image stabilization (OIS) in mobile phone cameras. The image stabilizer is composed of a horizontal stage constrained by ball bearings and actuated by the magnetic force from voice coil motors. The displacement of the stage is measured by Hall effect sensors. From the OIS frequency response experiment, the transfer function models of the stage and Hall effect sensor were identified. The weight functions were determined considering the tracking performance, noise attenuation, and stability with considerable margins. The $H_{\infty}$ optimal controller was executed using closed-loop shaping and limiting the controller order, which should be less than 6 for real-time implementation. The control algorithm was verified experimentally and proved to operate as designed.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.840-845
• /
• 2018

BLDC motor is widely used as a servo motor due to high efficiency, high power density, low inertia, and low maintenance. However, BLDC motor generally needs position and velocity sensors to control actuation system. Usually, analog tachometers and encoders have been used for velocity feedback sensors. However, using these types of sensors have problems such as the cost, space, and malfunction. So, This paper is to propose a new velocity measurement method using linear hall-effect and enhanced differentiator for BLDC motor. In order to verify the feasibility of the proposed method, several simulations and experiments are performed. It is shown that the proposed velocity measurement method can satisfy the requirements without using of velocity sensor.

• 한국전기전자재료학회논문지
• /
• 제14권10호
• /
• pp.792-795
• /
• 2001

we present a electrical transport(resistivity, Hall effect) measurements in varying temperature ranges between 78K and 300K on HoSi$_2$ composites by hot-pressed sintering. It has been found that this sintered HoSi$_2$ has a orthorhombic structure, and lattices constant is a=9.8545$\AA$, b=7.7935$\AA$, c=7.8071$\AA$. The measured electrical resistivity is about 1.608$\Omega$ cm and carrier mobility is about 6.9$\times$10$^{1}$cm $^{2}$V.sec at low room temperature. The Hall effect shows a n-type conductivity in the sintered HoSi$_2$.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1366-1370
• /
• 2010

This paper supposes the vector control algorithm to estimate the rotor position of permanent magnet synchronous traction motor using the hall-effect sensor. The hall-effect provides 60 electrical degrees resolution in rotor position sensing and it is very low resolution. The algorithm makes resolution high as optical encoders or electromagnetic resolver. If necessary, the reference rotor position angle is controlled by adjusting the variable. When a rotor position sensor such as either a optical encoder or a electromagnetic resolver is misalignment, it is useful to align with those. The method on adjusting the reference rotor position angle can compensate for misalignment error degrees by 60 electrical degrees.

• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.516-520
• /
• 2014

Fractional quantum Hall Effect (FQSH) is one of most fundamental issues in condensed matter physics, and the Topological insulator becomes its prominent applications. This article reviews the general frameworks of these development and the physical properties. FQSH states and topological insulators are supposed to be topologically invariant under the minor change of geometrical shape or internal impurities. The phase transitions involved in this phenomena are known not to be explained in terms of symmetry breaking or Landau-Ginsburg theory. The new type of phase transitions related to topological invariants has acquired new name - topological phase transition. The intuitive concepts and the other area having same type of phase transitions are discussed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.114-115
• /
• 2014

This paper proposes a new speed and position estimation method for PMSM(Permanent Magnet Synchronous Motor) using low-resolution hall-effect sensors. In general, there are a variety of sensors to estimate rotor position for PMSM such as resolvers, and encoders. Position detection using hall-effect sensors that detect the flux of the rotor for rotor position is excellent method in terms of cost and space, but has low-resolution. To overcome this problem, this paper proposes a new speed and position estimation observer. The performance of the observer has been verified by simulations carried out using Matlab/Simulink.

• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.141-150
• /
• 2021

In the present paper we have investigated the Stoneley wave propagation at the interface of two dissimilar homogeneous nonlocal magneto-thermoelastic media under the effect of hall current applied to multi-dual-phase lag heat transfer. The secular equations of Stoneley waves have been derived by using appropriate boundary conditions. The wave characteristics such as attenuation coefficients, temperature distribution and phase velocity are computed and have been depicted graphically. Effect of nonlocal parameter and hall effect are studied on the attenuation coefficient, phase velocity, temperature distribution change, stress component and displacement component. Also, some particular cases have been discussed from the present study.

• Journal of Mechanical Science and Technology
• /
• 제20권8호
• /
• pp.1302-1308
• /
• 2006

The unsteady Hartmann flow of an electrically conducting, viscous, incompressible fluid bounded by two parallel non-conducting porous plates is studied with heat transfer taking the Hall effect into consideration. An external uniform magnetic field and a uniform suction and injection are applied perpendicular to the plates while the fluid motion is subjected to an exponential decaying pressure gradient. The two plates are kept at different but constant temperatures while the Joule and viscous dissipations are included in the energy equation. The effect of the ion slip and the uniform suction and injection on both the velocity and temperature distributions is examined.