• Korean Journal of Veterinary Research
• /
• v.36 no.2
• /
• pp.289-296
• /
• 1996

A case of schistosomus reflexes in Korean native female calf was observed macroscopically and radiographically. The results were summarized as follows. 1. The abdominal visceral organs were exposed. 2. The vertebral column bent laterally to the left, and the sacrum approached to the cranium by reflected caudal lumber vertebrae, presenting S-shaped lateral twisting of the vertebrae. 3. The right ribs reflected laterally and dorso-cranially from the 7th rib to 13th rib. The left ribs bent caudally from 8th rib to 13th rib. 4. The length of rudimentary 6th right rib was one half of normal size and the 7th right rib was one third. 5. The sternum was bifid split from the fourth sternebra through the xyphoid cartilage. 6. The diaphragm was intact and thoracic cavity was reduced in size. The lung and heart severely deformed in shape and size. 7. The liver markedly deformed in shape and thickness. 8. The pelvic cavity was reduced in size by compression laterally to the left. 9. The uterus horn, ovary, urinary bladder, and urethra were severely deformed in the shape and position.

• Journal of architectural history
• /
• v.25 no.6
• /
• pp.81-88
• /
• 2016

The purpose of this study is to inquire original design and character of dancheong in Yeongnamnu P avilion which features unusual portraits of twisting dragons and four heavenly creatures. Its artistic value and originality can be found in the portraits of four heavenly creatures which are painted on the interior seonjayeon(fan shape rafter) and in the unique design of crossbeam meoricho(flower decorations on each side of pillars). Yeongnamnu's crossbeam meoricho is janggu-meoricho type(meoricho with hourglass figure) with full-shape lotus and half-shape flower decorations. And it can be said that, dragon portrait painted on the border of lotus and flower decorations in green and yellow is a very unique style of dancheong, for the reason that it has scarcely been used before and ever since. The portrait of four heavenly creatures painted on each corner of seonjayeon is also found to be unique in design, for the reason that the design has rarely been used throughout history, with only two exceptions in mural tombs of Goguryeo and folding screen in Injeongjeon Hall of Changdeokgung P alace. With its unique and authentic feature along with its rarity in number, the portrait of four heavenly creatures painted on Yeongnamnu can be considered as quite symbolic and important.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.5
• /
• pp.441-447
• /
• 2003

When a SnO$_2$ thin film was deposited by thermal CVD, two different types of growth behavior that were dependent on the deposition temperature were observed. The film grown at 475$^{\circ}C$ had a wide grain size distribution and a faceted surface shape. On the other hand, the film grown at 5$25^{\circ}C$ had a relatively narrow grain size distribution and a rounded sulfate shape. The aspects of grain shape and growth behavior agree well with the theory of gram growth and a roughening transition. The charge tarrier density decreased with deposition time. According to photoluminescence measurements, the peak intensity of the spectra occurred at approximately 2.5 eV, which is related to oxygen vacancies, and decreased with increasing of deposition time. These measurement results suggest that the number of oxygen vacancies, which is related to the electrical conductivity, decrease with deposition time.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.182-205
• /
• 2023

The use of royal artificial flowers was finally found through schematics and records in Wonhaeng Eulmyojeongri Uigwe, which organized the procession to Hwaseong in 1795. The results of classifying the uses of artificial flowers in the brthday banquet at Bongsudang Hall in 1795 and considering the shape, user, and usage are as follows. According to literature records, artificial flowers were made with high-quality materials such as gold, silver, and silk thread in the early period, but were mainly made of paper in the later period. Artificial flowers were used for decorating official hats, Bongsudang Hall, and banquet tables. The Sagwonhwa was used for decoration of the official hats of members of the royal family, and the one on the top was called Eosam-Sagwonhwa. At the birthday banquet inBongsudang Hall, King Jeongjo and Hyegyeonggung used the Eosam-Sagwonhwa and put it on the right side of the official hats. Officials put peach blossom with two petals on the left side of the official hats for decoration. The artificial flowers for decoration of the official hats of musicians and dancers were more expensive and flashier than the officials' ones. Depending on the dance, several artificial flowers were inserted into the official hats. When measuring the size of artificial flowers, the scale used was when making a ceremonial article. For artificial flowers for decoration of the banquet hall, red and white peach blossoms were placed in two jars with dragons painted on them and them placed on two red-painted tables, respectively. The table and jar with flowers were tied together with a red cotton string and fixed so as not to fall over. The artificial flowers for decoration of the banquet table of King Jeongjo, Hyegyeonggung, and the king's sisters were a large lotus, medium-sized lotus, peony, rose, and specially made peach flowers. The artificial flowers for decoration of the banquet table of guests and officials were small lotuses and peach blossoms. The artificial flowers used in the birthday banquet at Bongsudang Hall the most were peach blossoms, and peaches had the meaning of longevity and exorcism. It is expected that the above research results will be helpful in understanding the characteristics and usage of artificial flowers in the period of King Jeongjo and use in reproducing royal feasts and producing traditional cultural contents.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.8
• /
• pp.469-480
• /
• 2005

There have been always some difficulties in target setting and conditioning of acoustic performances or the Korean traditional music hall due mainly to the lack of the information on the sound radiation characteristics of Korean musical sources. As the 2nd experiment succeeding the previous study[1], the radiation characteristics of eight typical Korean traditional musical sources were investigated if precision. The selected musical sources were Geomungo, Haegeum (string), Piri, Taepyeongso (woodwind), Buk, Kwaengguari, Jing (drum), and male Pansori Chang (vocal Performance). The results show that the directivity pattern of each instrument is different and has their own directivity characteristics. Measured directional and spectral characteristics of traditional Korean music sources were implemented into the computation of architectural acoustic measures. Significant differences in the acoustic measures at receiver positions were observed between the results in using the omni-directional source and the directional one. In order to investigate the acoustical characteristics of the instruments depending on the spatial variation four different shapes of halls were introduced including rectangular, fan. horse-shoe and geometrical shapes. Room acoustical parameters such as RT, SPL, C80, LF, STI were calculated at each type or hall. As the results, It was found that the rectangular hall has the most high clarity. lateral energy and STI values among low shapes of halls. It is thought that the suggested source data and design method can be used as a basic reference in the future acoustic design of performance halls for the Korean traditional music.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.311-319
• /
• 2017

The primary suspension system of a railway vehicle restrains the wheelset and the bogie, which greatly affects the dynamic characteristics of the vehicle depending on the stiffness in each direction. In order to improve the dynamic characteristics, different stiffness in each direction is required. However, designing different stiffness in each direction is difficult in the case of a general suspension device. To address this, in this paper, an optimization technique is applied to design different stiffness in each direction by using a conical rubber spring. The optimization is performed by using target and analysis RMS values. Lastly, the final model is proposed by complementing the shape of the weak part of the model. An actual model is developed and the reliability of the optimization model is proved on the basis of a deviation average of about 7.7% compared to the target stiffness through a static load test. In addition, the stiffness value is applied to a multibody dynamics model to analyze the stability and curve performance. The critical speed of the improved model was 190km/h, which was faster than the maximum speed of 110km/h. In addition, the steering performance is improved by 34% compared with the conventional model.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.100-121
• /
• 2023

This paper examines the interior settings of a chamber and of a temporary place of enshrinement at Yeonghuijeon (永禧殿, Hall of Eternal Happiness), the representative official portrait hall in which portraits of early and late Joseon kings were enshrined. Also, it discusses the features of the Five Peak screens used therein. The physical environment of a chamber at Yeonghuijeon mainly consisted of a four-panel folding screen with a painting of Five Peaks and a large wooden platform, which was adorned with dragon and lion patterns and attached to lotus-leaf column balustrades. The Five Peak screen was installed on a large platform in the shape of ⊓, spreading across the second and third panels on the back and folding out on the first and fourth panels on the right and left sides. When a portrait was enshrined in a temporary place, a simpler and smaller platform with railings was used. A four-panel folding screen of the Five Peak painting was installed in the same way as in a chamber, but was unfolded around a smaller platform behind it. A royal portrait was displayed in each chamber, whereas a case in which a portrait was rolled up was put on the smaller platform in a temporary place. The Five Peak screens for a chamber and a temporary place were all large four-panel folding screens with two wide panels in the middle and two narrow panels on each side, and only strips of silk were mounted on the four edges of the screens without additional wide lower-side mountings. While screens for the chamber used patterned silk for mounting and white paper for backing on screen frames, screens for the temporary place used plain silk and recycled failed test papers for mounting and backing, respectively. By examining records in the literature on the Five Peak screens for Yeonghuijeon, this paper highlights two Five Peak screens, both of which lost their provenance from the hall. The structures of the two screens reflected the way they were to be installed at the hall. Furthermore, this paper assumes that a Five Peak screen, which had been unfolded on the throne in the main hall of Changdeokgung Palace after the 1960s, was produced in 1858 for the purpose of temporarily enshrining King Sunjo's portrait due to the fact that failed test papers of the 1840s were laid taut over the frame.

• Korean Institute of Interior Design Journal
• /
• v.22 no.6
• /
• pp.251-258
• /
• 2013

Space and figure are formed not by themselves but by the existence of light. It is important that plays a role as an intermediary of cognition which enables the formation of space and figure through Human's recognition in the process of design. Human perceive space and identity every basic form by the contrast of light and dark. The existence of light is very inclusive concept in the space, so space and form are completed by light. The change of based on time, place, and its amount acts as an important element Which can change the form of Space. In Space light doesn't work simply as light itself, but have a very close relation with Space, Form, Structure, Material, Color elements, Space is limited by physical form but human perceive space relatively by many other conditions, So same space can be experienced differently by the characters of light. Human can recognized and observe an object in the space as he processes information collected through light. In this process light make it possible for human to see the shape in space. therefore, the shape of space can get meanings when light exists. the space recognized by light is the mean that activates human activates in space.

• Journal of architectural history
• /
• v.25 no.4
• /
• pp.31-44
• /
• 2016

Geum'yeok-dang house in Andong was originally constructed in 1558. The original floor plan of the upper base featured a 90-degree tilted '日' shape, and had inner court(內庭) on each side of 'Jungdang(中堂, center hall)' building that was placed on the south-north axis. When designing the building, the Neo-Confucian client of Geum'yeok-dang applied his understanding of how Ga'rye("家禮") defined the structure of ritual space. Consequently, 'Daecheong(大廳)', the place where guests were greeted and ancestral rites and coming of age ceremonies for male were held, was built in a protruding fashion. 'Jungdang'[otherwise known as 'Jeongchim(正寢)'], where coming of age ceremonies for females were held, the master of the house faced death, and memorials for close ancestors were held, was placed at the center of the residence on the south-north axis. The Geum'yeok-dang today was greatly renovated in the early and mid 18th century, due to the spread of 'Ondol' heating system. As the Ondol heating system became popular, the pre-existing drawbacks and the inconvenience of the house stood out clearly. As a result, the house was renovated into today's structure consisting of '口' shape 'Anchae' and 'Daecheongchae' in separate building.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.702_703
• /
• 2009

Electric Power Steering(EPS) system is superior to conventional Hydraulic Power Steering(HPS) system in aspect of fuel economy and environmental concerns. The EPS system consists of torque sensor, electric motor, ECU(Electric Control Unit), gears and etc. Among the elements, the torque sensor is one of the core technologies of which output signal is used for main input of EPS controller. Usually, the torque sensor has used torsion bar to transform torsion angle into torque. The torsion angle of both ends of a torsion bar is measured by a contact variable resistor. In this paper, the sensor is accurately analyzed using 3D finite element method and its characteristics with respect to four different shapes of the stator teeth are compared. The four shapes are rectangular, triangular, trapezoidal and circular type.