• 전기학회논문지
• /
• 제65권11호
• /
• pp.1894-1899
• /
• 2016

In this paper, because the position sensor represents the important factor in BLDC (Brushless DC) motor drives, BLDC motor is necessary that the three Hall-sensors evenly be distributed around the stator circumference in case of the 3 phase motor. The Hall-sensor is set up in this motor to detect the main flux from the rotor. So the output signal from Hall-sensor is used to drive IGBT to control the stator winding current. However, in case of breakdown Hall sensor, we research that the estimation algorithm of Hall sensor signal to detect rotor position and for the speed feedback signals with BLDC motor whose six stator and two rotor designed. In addition, this paper presents a sensorless speed control of BLDC Motor using terminal voltage of the one phase. Rotor position information is extracted by indirectly sensing the back EMF from only one of the three terminal voltages for a three-phase BLDC motor.

• 전자공학회논문지
• /
• 제53권5호
• /
• pp.152-159
• /
• 2016

본 논문은 CMOS 자기센서(hall Sensor)의 오프셋 및 1/f 잡음 제거기술 기반 고선형 자기센서 신호처리장치를 제안한다. 제안하는 자기센서는 자계(magnetic Field)를 감지하여 자계의 변화량에 따른 홀 전압(hall Voltage)을 출력하는 홀 플레이트(hall Plate)와 홀 플레이트 출력 신호의 오프셋과 1/f 잡음 제거 및 디지털화를 위한 자기센서 신호처리시스템으로 구성된다. 자기센서 신호처리 시스템은 스피닝 전류 바이어싱(spinning current biasing)을 통해 자기신호로부터 오프셋과 1/f잡음 성분을 분리하고, 초퍼 및 증폭기를 통해 자기신호를 100 kHz 주파수 대역으로 변조한다. 60 kHz 차단주파수를 갖는 고역통과필터(highpass filter)를 사용하여 오프셋 및 1/f 잡음을 제거한뒤 ADC(analog to digital converter)를 통해 자기신호만을 디지털 변조한다. 증폭기 및 고역통과필터 출력은 자기신호 -53.9 dBm @ 100 kHz, 잡음성부은 -101.3 dBm @ 10 kHz이다. 최종적으로 ADC를 통과한 자기센서 출력은 -5.0 dBm @ 100 kHz이고, 오프셋 및 1/f 잡음은 -55.0 dBm @ 10 kHz이다.

• 비파괴검사학회지
• /
• 제36권6호
• /
• pp.490-495
• /
• 2016

펄스와전류탐상에서 탐상 신호는 주로 센서코일에 유도되는 기전력의 시간에 따른 변화를 측정하여 사용되었는데, 최근에는 홀센서(Hall sensor)로 측정한 신호를 사용하는 경우도 많아지고 있다. 본 논문에서는 펄스와전류탐상에서 나타나는 홀센서 신호를 수치적으로 모델링하여 예측하였다. 이를 위해 두께 측정을 위한 탐촉자를 설계하고 먼저 계단입력전류를 사용한 수치해석을 수행하여 홀센서를 사용하였을 경우의 신호를 예측하였다. 또한, 코일을 센서로 사용하였을 경우의 신호도 동시에 계산하였다. 수치모델링 결과로 예측된 홀센서 신호들은 실험 연구를 통해 보고된 신호들과 유사한 형태를 가지고 있음을 확인할 수 있었다. 그리고 피검사체의 두께 변화에 따른 두 신호들의 특성을 분석하고 비교해 본 결과, 홀센서 신호에서는 코일센서 신호에 비해 두께 변화를 판별하기 위한 정보가 더 적게 제공된다는 것을 알 수 있었다. 펄스입력전류를 사용한 경우의 탐상 신호들도 계산해 본 결과, 두 신호 모두 사용된 펄스의 폭이 지난 시간에는 계단입력전류를 사용한 경우의 응답이 반대가 되어 감소하는 형태로 나타난다는 것을 확인할 수 있었다.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.714-722
• /
• 2018

This paper presents a wide-range speed control scheme of brushless DC (BLDC) motors based on a hall sensor with separated low- and normal-speed controllers. However, the use of the hall sensor signal is insufficient to detect motor speed in the low-speed region because of low sensor resolution and time delay. In the proposed method, a micro-stepping current control method according to the torque angle variation is presented. In this mode, the motor current frequency and rotating angle are determined by the reference speed without the actual speed fed by the hall sensor. The detected torque angle is used to adjust the current value in a limited band to control the current value in accordance with the load. The torque angle is detected exactly at the changing point of the hall sensor signal. The rotor can follow the rotating flux with the variable torque angle. In a normal speed range, the conventional vector control scheme is used to control the motor current with a PI speed controller using the hall sensor. The torque characteristics are analyzed on the basis of the back EMF and current shape. To adopt the vector control scheme, the continuous rotor position is estimated by the measured speed and hall sensor position. At the mode changing point between low and normal speed range, the proper initial current command and reference rotor position are calculated. The calculated current command can reduce the torque ripple during transient mode. The proposed method is simple but effective in extending the speed control range of a conventional BLDC motor with hall sensor without the need for a high-resolution encoder. The effectiveness of the proposed method is verified by various experiments on a practical BLDC motor.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.889-897
• /
• 2016

This paper presents an improved approach for compensating rotor position signal displacement in brushless DC (BLDC) motors with misaligned hall-effect sensors. Typically, the hall-effect sensors in BLDC motors are located in each phase and positioned exactly 120 electrical degrees apart. However, limitations in mechanical tolerances make it difficult to place hall-effect sensors at the correct location. In this paper, a position error compensator to counteract the hall-effect sensor positioning error is proposed. The proposed position error compensator uses least squares error analysis to adjust the relative position error and back-EMF information to reduce the absolute offset error. The effectiveness of the proposed approach is verified through several experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.73-76
• /
• 2002

In this paper we present an integrated Hail sensor It for fan motors, fabricated in industrial bipolar process. As a discrete Hall sensor and signal processing circuitry In the fan motor system were Integrated into single chip a temperature dependence of Hall sensitivity and Hall offset voltage can be compensated and cancelled by on-chip circuitry. We Propose a novel temperature compensation of Hall sensitivity with negative temperature coefficient (TC) using the differential amplifier gain with Positive TC. After a package of the chip was sealed using a plastic Package 20 Pins, the thermal and magnetic characteristics were investigated. The obtained experimental results are in agreement with analytical predictions and have more excellent performance than\ulcorner conventional the fan motor system using discrete Hall sensor.

• Journal of Magnetics
• /
• 제19권2호
• /
• pp.151-154
• /
• 2014

Recent years have seen an increasing range of planar Hall resistive (PHR) sensor applications in the field of magnetic sensing. This study describes a new application of the PHR sensor to monitor a current. Initially, thermal drift experiments of the PHR sensor are performed, to determine the accuracy of the PHR signal output. The results of the thermal drift experiments show that there is no considerable drift in the signals attained from 0.1, 0.5, 1 and 2 mA current. Consequently, the PHR sensor provides adequate accuracy of the signal output, to perform the current monitoring experiments. The performances of the PHR sensor with bilayer and trilayer structures are then tested. The minimum detectable currents of the PHR sensor using bilayer and trilayer structures are $0.51{\mu}A$ and 54 nA, respectively. Therefore, the PHR sensor having trilayer structure is the better choice to detect ultra low current of few tens nanoampere.

• Journal of Magnetics
• /
• 제12권1호
• /
• pp.40-44
• /
• 2007

The Planar Hall effect in a spin valve structure has been applied as a biosensor being capable of detecting $Dynabeads^{(R)}$ M-280. The sensor performance was tested under the application of a DC magnetic field where the output signals were obtained from a nanovoltmeter. The sensor with the pattern size of $50{\times}100{\mu}m^2$ has produced high sensitivity; especially, the real-time profiles by using that sensor revealed significant performance at external applied magnetic field of around 7.0 Oe with the resolution of 0.04 beads per $\mu m^2$. Finally, a successful array including 24 patterns with the single sensor size of $3{\times}3{\mu}m^2$ has shown the uniform and stable signals for single magnetic bead detection. The comparison of this sensor signal with the others has proved feasibility for biosensor application. This, connecting with the advantages of more stable and high signal to noise of PHR sensor's behaviors, can be used to detect the biomolecules and provide a vehicle for detection and study of other molecular interaction.

• 센서학회지
• /
• 제29권5호
• /
• pp.283-292
• /
• 2020

Current sensors that use a Hall element and Hall IC to measure the magnetic fields generated in steel silicon core gaps do not distinguish between direct and alternating currents. Thus, they are primarily used to measure direct current (DC) in industrial equipment. Although such sensors can measure the DC when installed in expensive equipment, ascertaining problems becomes difficult if the equipment is set up in an unexposed space. The control box is only opened during scheduled maintenance or when anomalies occur. Therefore, in this paper, a method is proposed for facilitating the safety management and maintenance of equipment when necessary, instead of waiting for anomalies or scheduled maintenance. A Bluetooth 4.0 low-energy current-sensor system based on near-field communication is used, which compensates for the nonlinearity of the current-sensor output signal using a piecewise linear model. The sensor is controlled using its generic attribute profile. Sensor nodes and cell phones used to check the signals obtained from the sensor at 50-A input currents showed an accuracy of ±1%, exhibiting linearity in all communications within the range of 0 to 50 A, with a stable output voltage for each communication segment.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.931-938
• /
• 2016

Application of vector control scheme for consumer products is enlarging to improve control performance. For the field-oriented control, accurate position detection is essential and generally requires expensive sensors. On the other hand, cost-reduction is important in home appliances, so that binary-type Hall-effect sensors are commonly used rather than using an expensive sensor such as an encoder. The control performance is directly influenced by the accuracy of the position information, and there exist non-uniformities related to Hall sensors in electrical and mechanical aspects, which result in distorted position information. Therefore, to get high-precision position information from low-resolution Hall sensors, this paper proposes a new position estimator consisting of a Kalman filter and feedforward compensation scheme, which generates a linearly changing position signal. The efficacy of the proposed scheme is verified by simulation and experimental results carried out with a 48-pole permanent magnet motor.