• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.594-599
• /
• 2001

A study of single-stage PFC electronic ballast with constant do-link voltage is presented in this paper. The proposed ballast is combined by two interleaved boost cells and a conventional half bridge dc/ac inverter, By exploiting the interleaving technique, the Input ripple current of the electronic ballast is reduced. Theoretical analysis and experimental results for two 45(W) fluorescent lamps are presented.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.343-348
• /
• 2003

In this paper, a PFC(Power Factor Correction) electronic ballast with constant voltage-fed is proposed. The proposed PFC electronic ballast is combined of a High-efficiency boost converter and a conventional half bridge inverter. It is proved that the ripple of input-current and the input-current's harmonic of the proposed PFC electronic ballast are reduced using the voltage divider and soft-switching technique. It is demonstrated that simulation results for 40[W] fluorescent lamp correspond with theoretical analysis

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.237-240
• /
• 2006

In this paper, a new design using a simulation method was proposed. And to estimate its validity, various electronic and optical data were measured after making a 150[W] electronic ballast for high pressure sodium lamps. Using PSpice 9.1, the best solutions of various parameters such as the resonant frequency, the lamp output voltage, and the current of the electronic ballast were obtained. The power factor of the system was 99.8[%], the crest factor 1.44, the THD 4.99[%], and the weight 0.5[kg]. These are very good characteristics compared with a conventional HPS Lamp ballast.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.185-190
• /
• 2003

The most shortcoming of metalhalide lamps is what the instant restarting cannot be realized when the arc tube is in the hot condition. The discharge starting voltage of arc tube in the hot condition is much higher than in the cold condition. Therefore it takes about five minutes to restart the metalhalide lamps, that is to say, it is possible to start when the pressure and the temperature are decreased. But, if the lamp is restarted in the hot condition, we must supply the high voltage pulse with 20kV at the both sides of lamp. The proposed electronic ballast is consist of a electromagnetic interference (EMI) filter, a power factor correction (PFC) circuit, a flyback converter, a half-bridge inverter, and a high voltage igniter circuit. By this composition we can restart the lamp with the voltage 20kV, even if the lamp is in the hot condition.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1527-1529
• /
• 2005

고주파 유도가열은 무공해 에너지 절약을 기본으로 하는 전기가열의 한 방법으로 환경친화 및 에너지 절감의 요구에 부응하기 위한 것으로 고주파 공진형 인버터 기술과 충진 발열체의 열 교환 기술을 적용한 새로운 시스템이다. 본 논문에서는 1.5[kW]급 Half-Bridge 고주파 공진형 인버터를 이용한 유도가열 시스템의 동작해석, 특성분석 및 본 시스템을 이용한 가정용 시스템의 응용과 이동유체의 순시가열 시스템의 성능평가에 대하여 논한다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1503-1505
• /
• 2005

The Cold cathode fluorescent lamp(CCFL) are widely used to illuminate the liquid crystal display(LCD). Ballasts are required for CCFL because the lamp need high starting voltage and behave negative dynamic resistant characteristics in the desired region of operation. Dimming methods of CCFL are used to pulse frequency modulation(PFM) or pulse width modulation(PWM). In this paper, CCFL driving and control circuit is designed by half-bridge type series and parallel resonant inverter that variable frequency modulation method to control the output voltage current. The validity of this study is confirmed from the simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.413-415
• /
• 1995

This paper presents a new approach in the design of multiple power output electronic ballasts for compact fluorescent lamps which power output range of 11W, 15W, 20W by using equivalent resistance and RLC equivalent circuit concept and frequency control. A multiple power output electronic ballast which adopts half-bridge inverter topology is set up to compare the results of PSpice simulation with experimental ones. Starting characteristics of lamp voltage, lamp current and light output are better than the existing electronic ballasts, and therefore is verified the validity of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.274-275
• /
• 2010

신재생 에너지 분야에 적용되는 계통 연계형 인버터에서는 출력 전류 리플을 감소 및 계통 연계 기준을 만족하기 위하여 필터 인덕터가 필수적으로 사용된다. 현재 출력 인덕터로 적용될 수 있는 코아 중에서 아몰퍼스(Amorphous) 코아 AMCC 250을 사용하였으며, 단상하프브릿지 전압형 인버터의 스위칭은 SPWM 방법을 사용하였다. 본 논문에서는 출력 필터 인덕터 설계시에 사용할 수 있는 코아 손실 분석 방법을 제시하고, 제시된 방법에 따라 코아 손실 값을 도출하였다. 이러한 분석 결과를 실제 제작한 간이 열량계 통하여 검증을 시도하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7957-7963
• /
• 2015

R&D trend for Auxiliary Power Supply(APU) of electric vehicle can be well understood by analyzing patents at home and abroad. Based on this trend analysis, domestic technology development direction is proposed. To get technique trend, patents of Korea, Japan, Europe and America published until February of 2014 are analyzed by WIPS DB. First, power converter and transformer two big category are classified. Power converter can be classified into resonant DC to DC converter and resonant Half bridge inverter; transformer can be classified into high frequency transformer, ferrite transformer and matching transformer. By analyzing R&D trend of different counties, companies and years, specific technology needed to be developed and trend of technology can be accurately grasped.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.504-511
• /
• 2003

In this paper, inverter type neon power supply using a piezoelectric transformer is fabricated and its characteristic is investigated. Developed neon power supply is composed of basic circuit and blocks, such as rectifier part, frequency oscillation part and piezoelectric transformer and resonant half bridge inverters. In this paper for complement the low power limitation, piezoelectric transformer at parallel connected driving by inverter is studied for noon tubes system of high power. When piezoelectric transformer is connected with parallel, LC filter connection method with parallel and selection of inductance L and capacitor C of primary side is suggested for reduce unbalanced current at the terminal of each transformer. Piezoelectric transformers use piezoelectric ceramic devices. Thus it is wireless therefore it has high power density, high Isolation level, low loss, more light, and miniaturization. In addition, high voltage transfer ratio is expected because there is no leakage inductance. Also, it has economic merit that the electrical loss Is low because structure is simple, small and tighter weight.