• Journal of Korean Academy of Nursing
• /
• v.25 no.2
• /
• pp.362-371
• /
• 1995

There is no national system to manage, evaluate, and analyse the information about accidents, even though it is necessary for accident prevention policies and health promotion of the general public. The existing studies are, also limited as they focus only on particular group(for example : inpatients, emergency room patients) or on particular geographic areas. Thus the results of the studies cannot be ap-plied to the general public. In order to overcome these limitations, this research focuses on data collection and analysis from accident information for the general population. By providing the analysis on types and causes af accidents, this research aims to produce the basic data necessary for accident prevention policy development. The specific aims of this research are to : 1. Analyse the actual occurrences and characteristics of accidents. 2. Suggest for the accident prevention policies and safety education. Accident report form three major newspaper printed in Korea between January 1, 1989 and December 31, 1993 were collected, and the cause, place, time, and personal injury related to the accidents were classified and then analyzed by de-scriptive statistics. The results of this research conclude : 1. The number of accidents reported by the three newspapers were 2155. 2. The highest proportion of accidents were as follows ; occurred during the June-August(31.2%), Sunday(24.8%), and 5 p.m. (7.6%) of the day. 3. The highest proportion of the accident occurred in Seoul(33. l％), Kyunggi province(14.5%), Kangwon province (7.8％), and Kyungnam prov-ince(6.7%) were next highest. 4. The main causes include car accidents(32.4%), drowning(10.9%), falls(8.8%), explosion(7.1%), and poisoning(5.8%). 5. Slightly more than half of injuries(50.5%) and about two fifths of deaths(40.3%) were caused by car accidents. Therefore, the most serious type of accidents were car accidents. 6. The number of males in accidents were almost three times higher than that of females(males 72.3%, females : 27.7%). 7. The age group from 10 to 19 years old represents the highest proportion(21%) of accidents. 8. The number of the accidents in Korea, based on the information collected from the newspapers, is estimated to be 14, 367 per year. The number of in-juries is estimated to be 88, 480 persons, and the number of deaths 29, 007 respectively. It is said that ninety percent of accidents can be prevented. Several accidents prevention policies are suggested here. 1. Safety education should be done more actively throughtout life, with special emphasis on safety education for children. 2. Safety measures for children(halmets for cycling, children car seats, seats belts, and so on) should be emphasized. 3. An injury surveillance system should be initiated. The initiation of injury reporting system in each factory and school could contribute considerably to the reduction of accidents.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.717-723
• /
• 2013

The Korea Ministry of Environment prepares some paticulate matter eliminate measures for national health protection, as the Paticulate Matter ($PM_{2.5}$) exceeds the standard at more than half of the monitoring posts installed in the nation's big cities. At the center of JeonJu, when measuring the ultrafine particles of inner car at the different driving conditions, at the condition of the Actuator of inner recirculation mode and the Blower of 2-speed, the reduction speed of the ultrafine particles is most fast and the concentration stays low. When the windows are opened during driving, outer pollutants enter the car and also inner paticulate matter flies in all direction, and the increase of passengers causes the scattering of the ultrafine paticles. As the filter for air cleaning, the using of polypropylene non-woven fabric (used commonly now) is most excellent, but for the removal of volatile organic substance as well as the paticulate matter, it is thought that the using of activated carbon fiber filter, carbon adsorbent, is even more excellent.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.3
• /
• pp.17-28
• /
• 2003

The objective of this study is to review and verify whether the functions and effect of roadside trees generally known in theory are actually realized in urban roads and how well they are performed if the function and effect are really realized. The study was conducted with a focus on air purification effect of roadside trees. The m헤r study result is as follows. First, calculation of air purification effect of roadside trees showed that it is minimal. However, 7.4 units of broad-leaved trees is necessary in order to purify $SO_2$ discharged by one passenger car and 1,803.3 trees to purify $NO_2$. Second, regarding pollutant absorption capacity, air pollutant absorption capacity increased as the number of rows planted gets higher (i.e., 2-row plantation absorbs pollutant better than I-row plantation). In particular, "2-row plantation + lower-level shrub + buffer green belt" was as eight times high as "I-row plantation" in absorption capacity. Third, out of 30 roads with over 8 lanes in 15 cities, only 33.3% or a total of ten roads in seven cities had a median strip. Out of these ten roads, nine roads were planted in a double-layer consisting forest trees, shrubs, ground plants (grass). Analysis showed that out of six tree species planted along these roads, about a half of them were weak to air pollution. Also, based on the outcome of this study, charging a "plantation due" when people purchase a new car, improving layout of roadside trees, and reinforcing plantation of air purification tree species when selecting tree species for roadside trees were proposed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.143-150
• /
• 2006

In this paper, a new bushing model for vehicle dynamics analysis using Bouc-Wen hysteretic model is proposed. Bushing components of a vehicle suspension system are tested to capture the nonlinear behavior of rubber bushing elements using the MTS 3-axes rubber test machine. The results of the tests are used to define parameters in Bouc-Wen bushing model, which was employed to represent the hysteretic characteristics of the bushing. Bushing parameters are obtained by using genetic algorithms and sensitivity analysis of parameters are also carried out. ADAMS program was used for the identification process and VisualDOC program was employed to find the optimal parameters. A half-car simulation was carried out to show the usefulness of the developed bushing model.

• Advances in pediatric surgery
• /
• v.5 no.1
• /
• pp.53-57
• /
• 1999

Pediatric laparoscopic splenectomy has been gradually accepted as the surgical management of a various splenic disorders, particularly in hematologic diseases. We report our experience with 16 patients who underwent this procedure because of hematologic disorders during the past 3 and a half years at the Department of Surgery, St. Mary's Hospital, the Catholic University Medical College. The mean age was 10 years(range 6-16 years) and the mean spleen weight was 210 gm(range 85-500 g). The indication for splenectomy were hereditary spherocytosis(6 cases), idiopathic thrombocytopenic purpura(8 cases), autoimmune hemolytic anemia(1 case), and idiopathic splenomegaly(1 case). All splenectomies were performed safely with mean estimated blood loss of 233 ml. Mean operative time and mean postoperative hospital stay were 157 min and 4.5 days, respectively. Postoperative pain, medication was needed in 3 cases, just one injection in immediate postoperative period. Diet was started on the second or third postoperative day. In conclusion, laparoscopic splenectomy in pediatric patients is a safe procedure, offering a small of abdominal scar, much less pain, a shorter hospital stay and car the lower postoperative morbidity.

• Journal of KSNVE
• /
• v.11 no.3
• /
• pp.401-409
• /
• 2001

Passive type mufflers installed on every car haute inherent problem of lowering engine power and fuel efficiency caused by backpressure which is byproduct of complex internal structure. Recent improvements like installing a calve to change exhaust gas path depending on power requirement and rpm have only marginally improved performance. Tremendous amount of recent research works on active exhaust noise control have failed to commercialize because of numerous physical and economical reasons. In this paper, a unique seal-active muffler using difference of transmission paths is presented. In this system exhaust pipe is divided into two and joined again downstream. Exhaust noise is reduced by destructive interference when two-divided noise join again with transmission paths'difference which is half of the wavelength of a main noise frequency. One divided path has a sliding mechanism to change length thereby transmission path length difference is adjusted to entwine rpm change. The proposed system has minimal backpressure and does not need a secondary sound source like a speaker so it can overcome many problems of failed active noise control methods. We have verified proposed system's superior performance by simulation and comparison experiment with passive mufflers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.778-781
• /
• 2002

Durability of rubber dust cover in the ball joint for automotive suspension parts were analyzed by FEM and compared with experimental data. Upper open area of ball joint is sealed by dust cover for preventing outflow of the lubricating oil and intrusion of send, dust, water, etc. This rubber cover undergoes repeated loadings such as tension and compression while the car is running. Analysis about rubber material needs to consider every kinds of nonlinearities arise in finite element analysis, which are geometric nonlinearity due to large displacement and small strain, materially nonlinearity and nonlinear boundary condition such as contact. So in the study, the deformation behavior of dust cover was analysed by using the commercial finite element program MARC. This program could solve these kinds of nonlinear analysis accurately. Finite element model of dust cover is considered as 3-dimensional half model based on 2-dimensional axisymmetric model. Material property of rubber was modeled by Ogden model and input data for calculation takes form uniaxial tension test of rubber specimen, The final object of the study is obtaining the design specification of dust covers and the result of analysis should be a useful data to design of rubber

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.109-115
• /
• 2010

Interstitial-free (IF) steels are widely used for car body material. However, a few types of streaky mark defect are commonly found on hot dip galvannealed (GA) IF steel sheets. In the present study, both the phase structure of a streaky mark defect and the microstructure of the substrate just below it were characterized by optical microscopy (OM) and scanning electron microscopy (SEM). It was found that the bright streaky mark area was composed of ${\delta}$ phase while the dark normal area was full of craters. More than half of the grains at the uppermost surface of the substrate just below the streaky mark defect are unrecrystallized grains which could result from lower finish rolling temperature during hot rolling and be kept stable during the annealing process, while almost all the grains in the normal area are equiaxed grains. In order to confirm the effect of the unrecrystallized grains on the coating morphology, hot dip galvannealing simulation experiments were carried out in IWATANI HDPS. It is proved that the unrecrystallized grains accelerate the Fe-Zn reaction rate during galvannealing and result in a flatter coating surface and an even coating thickness. Finally, a formation mechanism of the streaky mark defect on the hot dip galvannealed IF steel sheet was discussed.

• Journal of Family Resource Management and Policy Review
• /
• v.14 no.1
• /
• pp.135-159
• /
• 2010

The purpose of the study was to investigate the characteristics and economic status of deficit households compared to surplus households. Data from The Household Income and Expenditure Survey 2005 by NSO and 50, 207 salary/wage earners' households were used for the analysis. The statistical methods used were GLM, logit, and cluster analyses. The analysis results showed that 25.3 percent of the households were deficit households. Approximately half of the lowest 20% income group were deficit households. Income deficit households earned 1, 273 thousand less than that of surplus households, whereas consumption of deficit households was 1, 006 thousand more than that of surplus households. The average propensity of consumption of deficit households was 142.1. According to the logit analysis, factors contributing to the probability of belonging to a deficit household included income level, household size, age and educational level, occupation, homeownership, car ownership, and wife's employment status. Deficit households were classified into 5 types: 1) health care expenditure-dominated group, 2) housing expenditure-dominated group, 3) education expenditure-dominated group, 4) money transfer-dominated group, and 5) overall-overconsumption group. The overall-overconsumption group was the largest group of all at 58.5%. It was found that for all five groups, the changes in household size, income group, home ownership, and occupation of the individual were variables that influenced the probability of belonging to a certain group.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.41-46
• /
• 2014

The aerodynamic drag of high-speed train has been calculated and the effect of bogie side fairing on the aerodynamic drag has been investigated. Computational Fluid Dynamics (CFD) simulation based on steady-state 3 dimensional Navier-Stokes equation has been conducted employing FLUENT 12 and the aerodynamic model of HEMU-430x, the Korean next generation high-speed train under development has been built using GAMBIT 2.4.6. Three types of bogie side fairing configuration, the proto-type without fairing, half-covered fairing to avoid the interference with the bogie frame and full-covered fairing have been adopted to the train model to compare the drag reduction effects of the bogie side fairing configurations and the numerical results yields that the bogie side fairing can reduce the aerodynamic drag of the 6-car trainset up to 7.8%. The aerodynamic drag coefficient of each vehicle as well as the flow structures around the bogie system have also been examined to analyze the reason and mechanism of the drag reduction by bogie side fairing.