• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.403-404
• /
• 2013

In this paper, a PCS which consists of high boost interleaved full-bridge converter and single phase half-bridge inverter is proposed. Proposed PCS is using two full bridge converter modules. PCS consists of parallel input / serial output. It can reduce turn ratio of high frequency transformer. In this paper, PCS which is using 1.5[kW] interleaved full-bridge converter and single phase half bridge inverter is designed and verified stability of system through experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.177-185
• /
• 2005

A new high efficiency DC/DC converter is proposed, which is derived from the conventional asymmetric half-bridge converter. Because the proposed converter has better ZVS condition compared with the conventional asymmetric half-bridge converter, it shows a high efficiency along the wide load range. In this paper, the basic operations of the proposed converter is analyzed and compared with that of the conventional half-bridge converter, and the excellent performance of the proposed converter is verified by the experimental results with the 425W, 385-170Vdc prototype of the power supply for PDP (Plasma Display Panel) Sustain Driver of PDP TV.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.5
• /
• pp.431-439
• /
• 2017

An asymmetric half-bridge is one of the most promising topology in low-power application because of its small number of components and inherent zero-voltage switching capability. However, when it is designed taking into a hold-up time, it has large transformer offset current and small transformer turns-ratio, which severely decreases the total efficiency of s converter. In this paper, a new boost-integrated asymmetric half-bridge converter is proposed to solve these problems. The integrated boost converter compensates the hold-up time, thus facilitating optimal design in nominal state. As a result, the proposed converter can achieve high efficiency in nominal state. To verify the effectiveness of the proposed converter, an experiment is conducted using a 250-400 V input and 45 V/3.3 A output prototype.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2508-2511
• /
• 1999

A non-contact battery charger which transfers energy using magnetic field without any electrical contacts is designed using half-bridge series resonant converter. This converter utilizes series resonance to reduce the undesirable effect of large leakage inductance of the non-contact transformer and ZVS operation can reduce switching losses. In this paper. analysis and design procedure of half-bridge series resonant converter with non-contact transformer is presented. Input voltage is 85VAC ${\sim}$ 270VAC, output voltage and current is 4.1V and 800mA, respectively. Furthermore, a method for calculating the secondary current of the transformer to control battery charging current in constant current charging mode which is required for litium-ion battery is proposed and the performance is verified from experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.3
• /
• pp.251-259
• /
• 2009

In this paper, a contactless power supply using half-bridge series resonant converter that achieves ZVS operation of main switches and ZCS operation of secondary side diodes is proposed. Since the proposed contactless power supply using half-bridge series resonant converter operates with lower switching frequency than the resonant frequency, it can achieve ZCS operation of secondary side diodes due to discontinuous resonant current. And it is also possible to control the converter in narrow frequency range and to obtain high voltage gain, which, in turn, offers low turns ratio for the transformer and high efficiency. Based on the theoretical analysis and simulation results, the 3.15W prototype is built and the final experimental results are described.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1533-1546
• /
• 2015

This study presents a novel method for reducing the switching losses of an asymmetric half-bridge converter for a three-phase, 12/8 switched reluctance motor operated in low speed. In particular, this study aims to reduce the switching-off losses of chopping switches in the converter when operated in the current regulated mode (chopping mode). The proposed method uses the mixed parallel operation of IGBT (chopping switch) and MOSFET (auxiliary switch). MOSFET is precisely controlled to momentarily conduct prior to the turn-off interval of the IGBT. Consequently, the voltage across the switches is clamped to approximately zero, substantially decreasing the turn-off switching losses. The analytical expressions of power losses are extensively elaborated. Compared with the conventional asymmetric half-bridge converter, the modified converter can effectively minimize the switching losses. Therefore, the efficiency of the converter is eventually improved. Computer simulation and experimental results confirm the effectiveness of the proposed technique.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.103-106
• /
• 2001

In this paper, a soft switching half-bridge converter using secondary switches for output control and conduction loss reduction is proposed. The conventional half-bridge converter must be fixed on duty cycle for soft switching. The proposed converter was consisted of two added switches in series of the secondary rectifier diodes. The main switches with constant duty cycle are operated ZVS. The secondary switches are operated ZV-ZCS. Especially, the primary switches were fixed duty cycle for maximum voltage conversion ratio. Output of converter is controlled by duty cycle or phase-shifted time of secondary switches. The conduction loss of the proposed converter can be reduced by the secondary switches. The operation characteristic, analysis, simulation and experimental results of the proposed converter are presented.

• Journal of Power Electronics
• /
• v.8 no.3
• /
• pp.239-247
• /
• 2008

This paper presents the design of 1 kW prototype high frequency link boost half bridge inverter-fed DC-DC power converters with bridge voltage-doublers suitable for small scale PEM fuel cell systems and associated control schemes. The operation principle of this converter is described using fuel cell modeling and some operating waveforms. The switching mode equivalent circuits are based on simulation results and a detailed circuit operation analysis at soft-switching conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.3
• /
• pp.26-36
• /
• 1997

An single stage AC/DC converter based on half bridge topology suitable for low power level applications is proposed. The proposed converter has high power factor, low harmonic distortion, and tight output regulations. Asymmetrical control and synchronous rectification are adopted to reduce the switching loss and rectification loss, respectively. The modelling employing average modelling method and detailed analysis are performed to derive the design equations. According to these design equations, a prototype converter has been designed and experimented. This prototype meets the IEC 555-2 regulations with near unity power factor and high efficiency.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.62-65
• /
• 2003

We considered of the efficiency for the Buck+Half bridge converter This converter has advantages of applications for a low output voltage, a high output current and a wide input voltage. Developed the Buck converter ratings and the Half Bridge converter ratings are 36$\~$72V Input and 22V/5A output, 19$\~$24v input and 3.3V/30A output, respectively. Buck converter is operated with zero voltage switching process to reduce the switching losses. The 80.1 $\~$97.6$\%$ of the efficiency is measured at 18.4 $\mu$H output filter inductance of Buck convertor. In Half Bridge convertor, the 86$\~$96.4$\%$ of the efficiency is measured at 100kHz switching frequency with PQI core.