• Korean Journal of Environment and Ecology
• /
• v.23 no.5
• /
• pp.411-417
• /
• 2009

This research is intended to discover physiological and biochemical defense mechanisms against herbivores of 8 species of the genus Acerby examining the morphological characteristics of the leaf, the structure and number of leaf domatia, herbivores insects and mites feeding on leaves, which were collected from the trees growing in Mt. Chiak, Mt. Cheongtae, Mt. Jungwang, Mt. Bangtae, Mt. Taebaek and Wonju City. This research was conducted from May through July, 2009, and the results are as follows. The domatia of A. pseudosieboldianum, A. pictum subsp. mono and A. mandshuricum belongs to tuft type; that of A. palmatum, A. triflorum and A. tschonoskii pocket+tuft type; and that of A. tegmentosum pocket type. The number of domatia per leaf turned out to be the highest in the case of A. tegmentosum(20.2), and the lowest in the case of A. ginnala (4.2). Leaf surface trichomes of A. palmatum, A. pseudosiebotdianum, A. ginnala and A. mandshuricum are covered with villi; those of A. pictum subsp. mono and A. triflorum with soft, pilose type of hair, and those of A. tschonoskii with stiff, strigose hair. The trichome density of lower leaf surface is found to be higher than that of the upper leaf surface. Only in the case of A. palmatum, A. pseudosieboldianum, A. tegmentosum and A. tschonoskii, a small amount of nectar is found to be secreted from the distal vein parts of the leaf margin. The number of mites on each leaf are found to be significantly different among tree species, and average mites number per leaf was the highest in the case of A. tschonoskii (9.2/leaf), and A. mandshuricum, A. pseudosieboldianum, and A. triflorum follow it in decreasing order. Minute insects attacking the leaf of Acer spp. include Periphyllus californiensis, P. viridis, Psylla spp, and gall mites, and the number of these insects are found in Periphyllus californiensis, Psylla spp, P. viridis, and Cicadellidae sp. in decreasing order. The natural enemies of these herbivores insects are predatory mites, such as Chilocorus rubidus, Coccinella septempunctata and the nymph, Aphidius ervi, Poecilocoris lewisi and its larva, and Poecilocoris lewisi. Lasius japonicus and Formica japonica are symbiotic with aphids, and supports herbivores. Finally, our research confirmed that predatory mites attack Periphyllus californiensis and suck the body fluid of their victim. This proves that mites form a symbiotic relationship with plants through the mediation of leaf domatia. This also indicates that a protective mutualism may be more conspicuous in temperate broad-leaved trees.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.84-107
• /
• 2018

Cheommojik is a pile cloth, a type of textile whose surface is covered with short piles. The term chaedam was used during the late Joseon dynasty to refer to pile cloth rugs, while the terms yoongjeon, dantong and yangtanja were used in the early twentieth century. Various documents, newspaper articles and photographs confirm that pile cloth rugs were used by the general public as well as the royal family from the late Joseon dynasty onward, and that there were domestic manufacturers of such rugs at that time. This study investigated six pile cloth rugs that were produced after the late Joseon dynasty, five of which feature Persian knots made of cut pile, the other being made with the loop pile method. The cut pile rugs are rectangular in shape and measure between 72-98cm by 150-156cm; and they are decorated in the middle with patterns of butterfly, deer, and tiger or the ten longevity symbols, and along the edges with patterns composed of 卍 symbols. The ground warp of all six rugs are made from cotton yarn, while the ground weft is made of cotton yarn on three pieces, wool on one piece and cotton and viscose rayon. The ground weft yarn from four pieces are Z-twist yarn made with two or more S-twist cotton yarn. Four to six colors were used for the pile weft, all being natural colors except for red. Two or more S- or Z-twist yarn were twisted together in the opposite twist for the pile weft, with the thickness determining the number of threads used. Six or more weft threads were used to make the start and end points of the rug; and the ground warp ends were arranged by tying every four of them together. For the left and right edges, three or more threads were wrapped together into a round stick-like form, and the second and third inner ground warps from the edges were stitched on to the wrapped edge. For the loop pile, loops were made in the direction of the warp; the ground warp and the ground weft may have been made with cotton, the pile warp with wool yarn. An analysis of the components of three rugs was conducted to determine which types of animal hair were used for the pile weft. Despite some inconclusive results, it was revealed that goat hair and fat-tailed sheep hair were used, raising the possibility that various kinds of animal fur were used in the production of pile cloth rugs. The six rugs examined in this study are estimated to have been made between the late 1800s and the early 1900s. Although the manufacturer of the rugs cannot be confirmed, we concluded that the rugs were produced in Korea after referring to the documentation of the domestic production of pile cloth rugs during the aforementioned period and the form and placements of the patterns on the rugs.

• Applied Microscopy
• /
• v.39 no.2
• /
• pp.149-156
• /
• 2009

Fine structure of the dry adhesion system in the tarsal appendages of the jumping spider Plexippus setipes (Araneae: Salticidae) with examined using field emission scanning electron microscope (FESEM). The jumping spiders have the distinctive attachment apparatus for adhesion on smooth dry surface without sticky fluids. They attach to rough substrates using tarsal claws, however attachment on smooth surfaces is achieved by means of a tuft-like hair called a scopula. All eight legs have the scopulae with a pair of claws on the tip of feet, and each scopula is composed of two groups of setae that are capable of dry adhesion on smooth surface. The apex of each seta is flattened pad bearing many specialized adhesive setules on one side. The cuticular sensillae are interspersed at the dorsal surface of the seta. It has been revealed by this research that the contact area of the setule is always a triangular shape, and these cuticular surfaces are connected by the elongated stalks from the underlying setae. Moreover, adhesion between the numerous setules and the setae was prevented by the microscopic hairs, since these were interspersed on the upper side of the setae.

• Composites Research
• /
• v.31 no.5
• /
• pp.209-214
• /
• 2018

This paper explain about the development of environmental friendly, low cost and stable supply material i.e., rice husk and shell were used as micro incorporating bio waste filler. Those were processed by ball mill and analyzed through micro observation by FE-SEM, EDS and particle size distribution. The obtained filler was mixed with epoxy resin for the manufacturing of CFRP composite and study tensile properties. In EDS analysis main contents of rice husk and rice husk ash are C, O and Si. When rice husk was burned C and Si ration were increased. Shell powder has C, O and Ca. It caused $CaCO_3$ from shell. Surface weighted mean of rice husk powder is $6.19{\mu}m$ and volume weighted mean is $14.77{\mu}m$. And it has rod type particles which caused hair and husk structure parts. Surface weighted mean of rice husk ash powder is $1.55{\mu}m$ and volume weighted means is $8.20{\mu}m$. Surface weighted mean of shell powder is $2.53{\mu}m$ and volume weighted mean is $5.79{\mu}m$. The tensile decreased with increasing the content of micro filler in CFRP composites. In case of rice husk, the significant decrement of tensile strength was observed. and in case of shell powder, there is no effect of changes take place in tensile strength.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.224-224
• /
• 2012

For decades, carbon fiber has expanded their application fields from reinforced composites to energy storage and transfer technologies such as electrodes for super-capacitors and lithium ion batteries and gas diffusion layers for proton exchange membrane fuel cell. Especially in fuel cell, water repellency of gas diffusion layer has become very important property for preventing flooding which is induced by condensed water could damage the fuel cell performance. In this work, we fabricated superhydrophobic network of carbon fiber with high aspect ratio hair-like nanostructure by preferential oxygen plasma etching. Superhydrophobic carbon fiber surfaces were achieved by hydrophobic material coating with a siloxane-based hydrocarbon film, which increased the water contact angle from $147^{\circ}$ to $163^{\circ}$ and decreased the contact angle hysteresis from $71^{\circ}$ to below $5^{\circ}$, sufficient to cause droplet roll-off from the surface in millimeter scale water droplet deposition test. Also, we have explored that the condensation behavior (nucleation and growth) of water droplet on the superhydrophobic carbon fiber were significantly retarded due to the high-aspect-ratio nanostructures under super-saturated vapor conditions. It is implied that superhydrophobic carbon fiber can provide a passage for vapor or gas flow in wet environments such as a gas diffusion layer requiring the effective water removal in the operation of proton exchange membrane fuel cell. Moreover, such nanostructuring of carbon-based materials can be extended to carbon fiber, carbon black or carbon films for applications as a cathode in lithium batteries or carbon fiber composites.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.75-96
• /
• 2000

Modern clothing is approached in the level of art, and it becomes the means of expressing individuality in modern society uniformed by the development of information society. In this modern society, modern men need the recovery of humanity and expectations of handcrafted skills for the succession of tradition culture. Prior to expressing individuality, we should examine our traditional culture and combine it with western culture. Quit started to be used for practical purpose such as life items, but it is expanded to the fields of art. Used in dress and its ornaments design, quilt is often applied to the addition of aesthetic factors or cubic material feelings by transforming its warming effect. Hereby, this study has a purpose to create high value added modern dross and its ornaments design by expressing the modern clothing is approached in the level of art, and it becomes the means of expressing individuality roe-dimensional characteristics of quilt, and applying the color combination and the surface of butterfly wings to dress and its ornaments design. The following are the results of this study. 1. The concept of quilt started for practical purposes, but it is expanded to decoration in modern times, and it is confirmed that quilt can be variously applied to handcrafted modern design. 2. Quilt removes the plane character of textile and it riches the three-dimensional material of dress and its ornaments. Applying these characteristics, the expression of transparent wings were possible with 3 transparent layers of textile. 3. The spledid color of butterfly wings are expressed by coloring oganza and felt, and the various colors of felt showed rich color gradation. 4. The form and pattern of butterfly wings are applied as modeling form and line, and the transformation. repetition and expansion of unit forms determined the form of quilting lines. By designing the characteristics of back wings for the composition line of clothing, the form characteristics of a motif could be emphasized. 5. By using felt, oganza, Damdam yarn and ostritch feathers in expressing butterfly wings, the warm material of Linbun is felt, and the tip hair of wings are expressed by croche techniques using Damdam yarn.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.49-58
• /
• 2006

The purpose of this study was to examine the effect of covering yarn's twist on mechanical properties of knitted fabrics of composite yarns with single covering process. Four yarns that were used in this study: two different composite yarns made from the four kinds of cotton and functional polyester-(Poly-A) with the ratio of 52:48, and the rest two yarns are the original cotton 100% yarn and the poly-A 100% yarn. The two kinds of composite yarns, CP1 and CP2, were processed on the single covering process. CP1 was applied on the single covering process with S-800 tpm, where Poly-A was used as covering yarn and cotton was used as core yarn. CP2 was applied on the same process as CP1 except that Poly-A had been applied on the two-for-one twisting process with S-400 tpm on the previous step. Sixteen mechanical properties of all the four knifed fabrics knitted under the same knitting conditions were measured by KES-FB system with the outer knit condition. And 3D CAD dressmaking simulations, which were driven by some of the mechanical properties, were presented. The results were as follows: CP2 had high RT values with twisting of covering yarn. CP2 also had high B, 2HB values because of higher linear density. SMD was affected rather by twisting of covering yarn than by fine hair of the cotton surface. Twisting of covering yarn made it decreasing T value and increasing W value. Dressmaking 3D CAD simulations showed that there are buckling effects on CP2 because of high bending rigidity and shear rigidity.

• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.3
• /
• pp.287-292
• /
• 2017

Vitiligo is an intriguing depigmentary disorder and is notoriously difficult to be treated. The ultimate goal of vitiligo treatment is to replenish the lost melanocytes by immigration from hair follicle and to restore the normal function of melanogenesis by residual melanocytes. There are two types of topical calcineurin inhibitors called tacrolimus and pimecrolimus, and are recommended as the first-line treatments in vitiligo. Although pimecrolimus is efficacious for the repigmentation of vitiligo, its intrinsic mechanisms have never been investigated in vitro. This research aimed to study the ability of pimecrolimus on stimulating melanogenesis, melanocyte migration and MITF (microphthalmia associated transcription factor) protein expression. Results showed that pimecrolimus at the dosages of 1, 10, $10^2$nM were neither mitogenic nor cytotoxic to melanocytes. The addition of pimecrolimus at 10, $10^2$ and $10^3nM$ significantly increased intracellular tyrosinase activity, which was consistent with the elevated content of melanin content at the same concentrations. The peak effect was seen at 72 h in response to $10^2$nM pimecrolimus. Results of the wound scratch assay and Transwell assays indicate that pimecrolimus is effective in facilitating melanocyte migration on a collagen IV-coated surface. In addition, MITF protein yield reached the highest by pimecrolimus at $10^2nM$. In brief, pimecrolimus enhances melanin synthesis as well as promotes migration of melanocytes directly, possibly via their effects on MITF protein expression.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.2
• /
• pp.133-138
• /
• 2012

The purpose of this study was to examine the correlation between physical properties of dried coacervate films and dry feel for shampoo composition. Simple shampoo compositions were made of two different cationic charge density polymers in the same surfactant compositions. The simple shampoo compositions were diluted with distilled water to make coacervate. Formed coacervate was collected by centrifuge (3,000 rpm, 30 min). Coacervate was coated on the glass plates and dried in drying oven (for 1 h, $50^{\circ}C$) to make the thin film. We carried out an experiment on measurement of contact angle, moisture loss ratio and SEM image analysis of the dried coacervate film. Dry feelings of the shampoos were evaluated by panel using hair tresses. Results show that the properties of dried coacervate films affect the dry feel of the after shampooing.

• Journal of Yeungnam Medical Science
• /
• v.8 no.2
• /
• pp.45-51
• /
• 1991

There had been no reports of Trichophyton tonsurans infection in Korea yet. We have much chances to import the organism through international travels and exchanges. But we, Korean, have no experiences to observe T. tonsurans. Author tried mycological studies with T. tonsurans isolated in New Orleans, USA. The results are as follows : Gross findings of T. tonsurans showed that fine granular surface with light yellow hue or white color and groving in the central area on the front side and mahogany brown color on the reverse side. On the urease test, various reddish discoloration was noted. Microscopic findings showed that septated hyphae, macroconidia, chlamydoconidia and microcondia. Macroconidia were 3-5 septated, smooth-surfaced, and were found more frequently in the whitish colony. Microconidia were characteristic in their arrangement and shape ; round or oval shaped microconidia laterally to hyphae, some were match-head like terminal swelling. Hair perforation test showed positive results in 16 strains among 19 tested strains. All these findings are similar to T. rubrum and T. menatgrophytes, the most frequent isolates of dermatophytes in Korea. And we have to pay an attention to diffentiate carefully.