• 제목/요약/키워드: HVPS

검색결과 16건 처리시간 0.023초

군위성통신 차량용단말 X-대역 TWTA용 HVPS 개발 (Development of HVPS of the X-Band TWTA for Military Transportable Satellite Communications)

  • 박재돈;장진상;동문호
    • 한국통신학회논문지
    • /
    • 제30권12A호
    • /
    • pp.1168-1173
    • /
    • 2005
  • 본 논문에서는 군위성통신의 차량용단말에 사용되는 X-대역 TQTA용 HVPS를 설계 및 제작하고 그 성능을 측정하였다. 본 HVPS는 X-대역에서 600 W의 RF 신호 출력을 발생시키는 TWT를 구동시키기 위하여 제작되었다. HVPS의 스위칭 주파수는 80 kHz로 설계되었고 입력전원은 380 V의 직류전원을 사용한다. HVPS의 출력전압은 Cathode 전극에 -10.95 kV의 최대전압을 발생시키고 두개의 Collector 전극에 각각 -4.27 kV, -6.57 kV의 고압 전원을 제공하며 총 출력 전력은 1.6 kW를 발생시킨다. 한편, ripple 전압의 peak-to-peak 크기는 Cathode 전극의 경우 6 V, Collectorl은 12 V, Collector 2는 6 V로서 출력전압에 비해 각각 $0.055\%,\;0.281\%,\;0.091\%$ 수준으로 상당히 안정된 전원특성을 얻었다.

Development of Airborne High Density High Voltage Power Supply for Traveling Wave Tubes

  • Park Young-Ju
    • Journal of Power Electronics
    • /
    • 제5권4호
    • /
    • pp.257-263
    • /
    • 2005
  • This paper describes the development and testing results of a high density High Voltage Power Supply (HVPS) that drives microwave Traveling Wave Tubes (TWTs) of phased array transmitters for airborne EW systems. The HVPS is designed to consist of a number of modules connected in series. Among them, especially, the high-density pulse transformer module including the resonant circuit is newly designed to make the HVPS much more reliable. In addition, this paper describes the development of high voltage solid-state modulation using fast switching devices (FETs) and also represents the test results of a modulator module.

위상 배열 고출력증폭기용 고밀도 고전압 전원공급기 하드웨어 구성 및 FPGA를 이용한 고속 독립 제어방식 (Hardware configuration of High-Density HVPS and High Speed independent Control method Using FPGA for Phased Array Transmitters)

  • 강춘호;이성욱;이홍학;이창훈;변기식
    • 한국정보통신학회논문지
    • /
    • 제19권11호
    • /
    • pp.2758-2764
    • /
    • 2015
  • 위상배열 고출력증폭기용 고전압전원공급기(HVPS)는 다출력 소용량 진행파관(TWT)을 구동하는데 반드시 독립운용 특성을 가져야만 한다. TWT 독립운용 특성은 어느 하나의 TWT가 고장이 발생한 경우에도 부분 송신기능을 유지함으로써 관련 임무를 중단 없이 수행하는 매우 중요한 요소로 알려져 있다. 본 논문에서는 소용량 TWT들을 독립 운용하기 위한 FE 변조부를 포함한 고밀도 HVPS 하드웨어 구성 및 FPGA를 이용한 고속 독립 제어방식에 관해 기술하였다. 또한, 위상배열 고출력증폭기 운용 중 발생 가능한 고장을 모의하여 안정적으로 고장이 발생한 TWT가 독립 제어되는 시험결과를 기술하였다.

진행파관(TWT) 구동용 고밀도 고전압 전원공급기 개발 (Development of High Density High Voltage Power Supply for Traveling Wave Tubes)

  • 박영주;이규송;류시찬
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
    • /
    • pp.256-259
    • /
    • 2003
  • In this paper describes the development testing results of high density High Voltage Power Supply(HVPS) that employ microwave TWTs. The HVPS consist of number of modules connected in series. A new design that adapt resonant circuit and high density pulse transformer to the high voltage modules makes the HVPS much more reliable. Also High voltage Solid-State modulation using fast switching devices(FET's) and the test results of modulator modules development are represented.

  • PDF

위성 자세제어용 자이로 HVPS 설계 (Gyro HV Power Supply Design for Attitude Control in the Satellite)

  • 김의찬;구자춘
    • 항공우주기술
    • /
    • 제6권1호
    • /
    • pp.109-113
    • /
    • 2007
  • 위성에는 자세제어를 위하여 광학식 자이로가 사용되고 있다. 여러 종류의 자이로중 타자이로에 비해 RLG는 정밀도는 높으나 레이저 방전현상을 이용하므로 방전관 전극의 수명이 곧 자이로의 수명을 결정짓는 요소이다. 그래서 현재는 비교적 짧은 4년의 수명을 목표로 하는 저궤도 위성의 자세제어를 위하여 장착되어 사용되고 있다. 링 레이저 자이로 (RLG)의 전자모듈 전원은 크게 레이저를 발진시키기 위한 전압과(Discharge 전압), Lock-in을 보상하는 Dither를 구동하는 전압(Dither 구동 전압)과 광경로를 일정하게 유지하기 위해 미러를 구동하는 전압(PLC 구동 전압)인 고전압계통의 전원과 로직회로와 아날로그 회로를 구동하는 저전압 계통의 전원으로 나눌 수 있다. 본 논문에서는 Flyback Converter를 이용하여 헬륨-네온 레이저의 플라즈마를 생성하고 발진을 유지하는 Discharge전압을 포함하는 자이로 전력계 설계과정을 제시한다.

  • PDF

마이크로파 탐색레이더 진행파관증폭기 정비시스템 구현 (Implementation of Traveling Wave Tube Amplifier Maintenance System for the Microwave Surveillance Radar)

  • 윤인철;권종원;박용만;오드게럴;김희식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.264-266
    • /
    • 2006
  • This traveling wave tube amplifier maintenance system was developed for performance of microwave Surveillance radar traveling wave tube amplification parts, and field operation. The Maintenance system is traveling wave tube amplification part RF output waveform measurement and HVPS Voltage adjustment and a maintenance function are offer. The system was developed as an embedded system base it consisted of Linux os which applied a top-down design and visual technique. Therefore change and easy extension of a system. This paper discussed characteristic of maintenance equipment function, composition, and an employment program.

  • PDF

밀리미터파(Ka 밴드) 복합모드 탐색기용 고출력 펄스형 진행파관 증폭기(TWTA) 설계 및 제작 (Design and Fabrication of a High-Power Pulsed TWTA for Millimeter-Wave(Ka-Band) Multi-Mode Seeker)

  • 송성찬;김선기;이성욱;민성기
    • 한국전자파학회논문지
    • /
    • 제30권4호
    • /
    • pp.307-313
    • /
    • 2019
  • Ka-대역 밀리미터파 복합모드 탐색기에 적용할 수 있는 진행파관 증폭기(traveling wave tube amplifier: TWTA)는 고전압생성부(high voltage power supply: HVPS), 변조부(grid modulator), 제어부(command & control), 고조파부(RF assembly)로 구성되는 고출력 펄스형 송신기이다. 펄스 반복 주파수(pulse repetition frequency: PRF)와 전원공급기 스위칭 주파수가 동기/가변되어 -17.9 kV 고전압을 생성하는 고전압 전원 공급기와 RF 펄스 변조를 위한 고속 그리드 스위칭 변조기를 설계하였다. 체적이 3.18 L로 소형화로 제작된 TWTA는 그리드 on/off 신호의 상승/하강시간이 최대 18.5 ns 이하 고속펄스 스위칭 특성을 가지고, 첨두전력은 564.9 W 이상으로 고출력 성능을 보였다. 또한 PRF와 PRF/2 범위 내에서 -68.4 dBc 이하의 우수한 불요파 성능을 확인하였다.

저궤도 위성 자세제어용 자이로 고전압 발생기 설계 (The Gyro High Voltage Power Supply Design for Attitude Control in the Satellite)

  • 김의찬;이흥호
    • 전기학회논문지
    • /
    • 제57권3호
    • /
    • pp.403-408
    • /
    • 2008
  • The gyroscope is the sensor for detecting the rotation in inertial reference frame and constitute the navigation system together an accelerometer. As the inertial reference equipment for attitude determination and control in the satellite, the mechanical gyroscope has been used but it bring the disturbance for mass unbalance so the disturbance give a bad influence to the observation satellite mission because the mechanical gyroscope has the rotation parts. During the launch. The mechanical gyroscope is weak in vibration, shock and has the defect of narrow operating temperature range so it need the special design in integration. Recently the low orbit observation satellite for seeking the high pointing accuracy of image camera payload accept the FOG(Fiber Optic Gyro) or RLG(Ring Laser Gyro) for the attitude determination and control. The Ring Laser Gyro makes use of the Sanac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. It need the 1000V DC to create the He-Ne plasma in discharge tube. In this paper, the design process of the High Voltage Power Supply for RLG(Ring Laser Gyroscope) is described. The specification for High Voltage Power Supply (HVPS) is proposed. Also, The analysis of flyback converter topology is explained. The Design for the HVPS is composed of the inverter circuit, feedback control circuit, high frequency switching transformer design and voltage doubler circuit.

저궤도 위성 자세제어용 센서 RLG 전원 공급기 설계 (The RLG's Power Supply Design for Attitude Control in the Satellite)

  • 김의찬;이흥호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1488-1490
    • /
    • 2008
  • The gyroscope is the sensor for detecting the rotation in inertial reference frame and constitute the navigation system together an accelerometer. As the inertial reference equipment for attitude determination and control in the satellite, the mechanical gyroscope has been used but it bring the disturbance for mass unbalance so the disturbance give a bad influence to the observation satellite mission because the mechanical gyroscope has the rotation parts. During the launch, The mechanical gyroscope is weak in vibration, shock and has the defect of narrow operating temperature range so it need the special design in integration. Recently the low orbit observation satellite for seeking the high pointing accuracy of image camera payload accept the FOG(Fiber Optic Gyro) or RLG(Ring Laser Gyro) for the attitude determination and control. The Ring Laser Gyro makes use of the Sanac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. It need the 1000V DC to create the He-Ne plasma in discharge tube. In this paper, the design process of the High Voltage Power Supply for RLG(Ring Laser Gyroscope) is described. The specification for High Voltage Power Supply(HVPS) is proposed. Also, The analysis of flyback converter topology is explained. The Design for the HVPS is composed of the inverter circuit, feedback control circuit, high frequency switching transformer design and voltage doubler circuit.

  • PDF

탐지 레이다용 헬릭스 진행파관 증폭기 지연파구조 특성 연구 (Applicable Study on Helix TWTA of Slow-Wave Structure for Surveillance RADAR)

  • 윤인철;김희식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.145-150
    • /
    • 2008
  • 본 논문에서는 탐지레이다용 진행파관증폭기 (TWTA: Traveling Wave Tube Amplifier)의 개발을 위한 지연파구조 특성을 제안한다. 지연파구조 특성 및 이론적 해석을 위해 증폭기 설계 및 구현시 HFSS Code와 LMSuite Code를 활용 하였다. 나선형 저속파 진행파관 증폭기의 절단 및 시뮬레이션을 통하여 제안한 측정값이 설계규격을 만족시키는 결과를 얻었다. 본 논문에서 제안만 규격은 매우 유용하며 따라서 차후 유사장비 개발시 적용 가능할 것으로 판단된다.

  • PDF