• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.163-165
• /
• 2017

최근 단일 모바일 기기에서 처리하기 어려운 모바일 컴퓨팅을 처리하는 연구가 진행되고 있다. 모바일 기기로 구성된 모바일 클라우드내에서는 멀티미디어, 소셜미디어 등의 다양한 모바일 컴퓨팅이 발생하기 때문에[1], 고성능 컴퓨팅(HPC) 보다는 대규모 컴퓨팅(HTC)이 필요하다[2]. 또한 모바일 컴퓨팅 작업이 모바일 기기의 컴퓨팅 리소스에 어떻게 할당하는지에 대한 상태 파악이 중요하다. 따라서 본 논문에서는 모바일 기기를 통합한 모바일 클라우드내 대규모 컴퓨팅을 위한 모바일 작업 할당 시뮬레이터(JAS-HTC)를 제안한다. JAS-HTC는 모바일 컴퓨팅의 작업 할당을 시각적으로 표현하여, 대규모 컴퓨팅 작업 처리의 상태를 파악할 수 있도록 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.41-44
• /
• 1998

(1-X)LTC-XHTC composites were manufactured with the variation of X in the range of 0.3 $\leq$X $\leq$0.6 and its dielectric properties were investigated. Here, LTC and HTC are PZN-BT-PT -based ceramics with quire temperature(Tc) of 100。 C-3$0^{\circ}C$, respectively. 0.6HTC-0.4LTC composite ceramics show excellent values of $\Delta$$\varepsilon$$_{r}$/$\varepsilon$[%] which were -7.1% at -2$0^{\circ}C$ and -12% at 5$0^{\circ}C$, respectively. It is thought that composite ceramics with above results can be applied to electrostrictive actuator, high voltage ceramic capacitor etc.mic capacitor etc.r etc.c.

• Journal of Information Processing Systems
• /
• v.14 no.4
• /
• pp.980-988
• /
• 2018

Motion estimation is a key Natural User Interface/Natural User Experience (NUI/NUX) technology to utilize motions as commands. HTC VIVE is an excellent device for estimating motions but only considers the positions of hands, not the orientations of arms. Even if the positions of the hands are the same, the meaning of motions can differ according to the orientations of the arms. Therefore, when the positions of arms are measured and utilized, their orientations should be estimated as well. This paper proposes a method for estimating the arm orientations based on the Bayesian probability of the hand positions measured in advance. In experiments, the proposed method was used to measure the hand positions with HTC VIVE. The results showed that the proposed method estimated orientations with an error rate of about 19%, but the possibility of estimating the orientation of any body part without additional devices was demonstrated.

• The Journal of the Korea Contents Association
• /
• v.14 no.5
• /
• pp.8-17
• /
• 2014

Petascale systems(so called supercomputers) have been mainly used for supporting communication-intensive and tightly-coupled parallel computations based on message passing interfaces such as MPI(HPC: High-Performance Computing). On the other hand, computing paradigms such as High-Throughput Computing(HTC) mainly target compute-intensive (relatively low I/O requirements) applications consisting of many loosely-coupled tasks(there is no communication needed between them). In Korea, recently emerging applications from various scientific fields such as pharmaceutical domain, high-energy physics, and nuclear physics require a very large amount of computing power that cannot be supported by a single type of computing resources. In this paper, we present our HTCaaS(High-Throughput Computing as a Service) which can leverage national distributed computing resources in Korea to support these challenging HTC applications and describe the details of our system architecture, job execution scenario and case studies of various scientific applications.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.5
• /
• pp.45-52
• /
• 2014

Torrefaction and hydrothermal carbonization (HTC) are productive methods to reclaim energy from lignocellulosic biomass. The hydrophobic, homogenized, energy dense and carbon rich solid fuel can be obtain from torrefaction and hydrothermal carbonization. Dead leaves were carbonized in a stainless steel reactor of volume 200 ml with torrefaction ($250-270^{\circ}C$) for 120 minutes and hydrothermal carbonization ($200-250^{\circ}C$) for 30 minutes, with mass yield solid fuel ranging from 57-70% and energy content from 16.81MJ/kg to 22.01 MJ/kg compare to the biomass. The char produced from torrefaction process possess high energy content than hydrothermal carbonization. The highest energy yield of 89.96% was obtained by torrefaction at $250^{\circ}C$. The energy densification ratio fluctuated in between 1.15 to 1.30. On the basis of pore size distribution of the chars, the definition of the International Union of Pure and Applied Chemistry (IUPAC) was used as a classification standard. The pore diameter was ranging within 11.09-19 nm which play important role in water holding capacity in soil. Larger pores can hold water and provide passage for small pores. Therefore, it can be concluded that high pore size char can be obtained my HTC process and high energy content char of 22.01 MJ/Kg with 34.04% increase in energy can be obtain by torrefaction process.

• Clean Technology
• /
• v.29 no.2
• /
• pp.102-108
• /
• 2023

This study applied a hydrothermal carbonization (HTC) method to carbonize sewage sludge in order to satisfy the criteria of the Waste Management Act for recycled products and to explore the possibility of recycling sludge into modification blocks. Cement was mixed with carbonized sludge generated at the optimal temperature and reaction time during HTC. After that, the compressive strengths of the modification blocks were measured by conducting both a performance and leaching test. The results of the leaching test showed that heavy metals were not detected, and the specific gravity and absorption rates were less than 1.7 and 10%, respectively, indicating that all species satisfied the criteria. The results of the compressive strength test showed that a mixing ratio of 5% and 7% with cement cured for 28 days satisfied the criteria of A, B, and C type blocks but a mixing ratio of 3% with cement did not satisfy the criteria of A type blocks after 28 days. However, after additional curing for 42 days, the mixing ratio of 3% also satisfied the A type block criteria. Therefore, the optimal mixing ratio of carbonized sludge and cement was considered to be between 3% and 5% and confirmed that the modified blocks could be utilized as aggregates.

• 한국초전도학회:학술대회논문집
• /
• 2009.07a
• /
• pp.15-15
• /
• 2009

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.3
• /
• pp.335-342
• /
• 2014

In this paper We study on test methods and procedures for Hybrid Track Circuit's practicalization. It's possible to apply to HTC's Seoulmetro and high-speed train by proposing test method considering special rail environment and RFID tag and leader, antenna We also present the test methods and procedures for safe and reliable of interface among the Hybrid track circuit devices.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.277-292
• /
• 2012

The research presents an application of Balanced ANOVA (BANOVA) by utilizing randomized orders for various Split-Plot Designs (SPDs) which include two cell designs, split-plot with one-way HTC (Hard to Control) factor, split-plot with two-way HTC factor, split-split-plot design and nested design. In addition, four MINITAB examples of 2-level split-plot designs based on the number of blocks and the type of whole-plots are presented for practitioners to obtain comprehensive understanding. Furthermore, the geometrical interrelated properties among three typical Designs of Experiments (DOE), such as Factorial Design (FD), Response Surface Design (RSD), and Mixture Design (MD) are discussed in this paper.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1140-1142
• /
• 1996

In this paper, a fixed-horizon $H_{\infty}$ tracking control (HTC) for continuous time-varying systems is proposed in state-feedback case. The solution is obtained via the dynamic game theory. From HTC, an intervalwise receding horizon $H_{\infty}$ tracking control (IHTC) for continuous periodic systems is obtained using the intervalwise strategy. The conditions under which IHTC stabilizes the closed-loop system are proposed. Under proposed stability conditions, it is shown that IHTC guarantees the $H_{\infty}$-norm bound.