• 제목/요약/키워드: HTC

검색결과 84건 처리시간 0.023초

모바일 리소스 통합기반 대규모 컴퓨팅을 위한 작업 할당 시뮬레이터 (Job Allocation Simulator for High Throughput Computing based on Integrated Mobile Resources)

  • 한석현;김현우;송은하;이강만;정영식
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2017년도 추계학술발표대회
    • /
    • pp.163-165
    • /
    • 2017
  • 최근 단일 모바일 기기에서 처리하기 어려운 모바일 컴퓨팅을 처리하는 연구가 진행되고 있다. 모바일 기기로 구성된 모바일 클라우드내에서는 멀티미디어, 소셜미디어 등의 다양한 모바일 컴퓨팅이 발생하기 때문에[1], 고성능 컴퓨팅(HPC) 보다는 대규모 컴퓨팅(HTC)이 필요하다[2]. 또한 모바일 컴퓨팅 작업이 모바일 기기의 컴퓨팅 리소스에 어떻게 할당하는지에 대한 상태 파악이 중요하다. 따라서 본 논문에서는 모바일 기기를 통합한 모바일 클라우드내 대규모 컴퓨팅을 위한 모바일 작업 할당 시뮬레이터(JAS-HTC)를 제안한다. JAS-HTC는 모바일 컴퓨팅의 작업 할당을 시각적으로 표현하여, 대규모 컴퓨팅 작업 처리의 상태를 파악할 수 있도록 한다.

PZN-BT-PT계 복합 세라믹스의 유전특성에 관한 연구 (Dielectric properties of PZN-BT-PT composite ceramics)

  • 이용우;류주현;윤현상;박창엽;정영호;하복남
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 추계학술대회 논문집
    • /
    • pp.41-44
    • /
    • 1998
  • (1-X)LTC-XHTC composites were manufactured with the variation of X in the range of 0.3 $\leq$X $\leq$0.6 and its dielectric properties were investigated. Here, LTC and HTC are PZN-BT-PT -based ceramics with quire temperature(Tc) of 100。 C-3$0^{\circ}C$, respectively. 0.6HTC-0.4LTC composite ceramics show excellent values of $\Delta$$\varepsilon$$_{r}$/$\varepsilon$[%] which were -7.1% at -2$0^{\circ}C$ and -12% at 5$0^{\circ}C$, respectively. It is thought that composite ceramics with above results can be applied to electrostrictive actuator, high voltage ceramic capacitor etc.mic capacitor etc.r etc.c.

  • PDF

Arm Orientation Estimation Method with Multiple Devices for NUI/NUX

  • Sung, Yunsick;Choi, Ryong;Jeong, Young-Sik
    • Journal of Information Processing Systems
    • /
    • 제14권4호
    • /
    • pp.980-988
    • /
    • 2018
  • Motion estimation is a key Natural User Interface/Natural User Experience (NUI/NUX) technology to utilize motions as commands. HTC VIVE is an excellent device for estimating motions but only considers the positions of hands, not the orientations of arms. Even if the positions of the hands are the same, the meaning of motions can differ according to the orientations of the arms. Therefore, when the positions of arms are measured and utilized, their orientations should be estimated as well. This paper proposes a method for estimating the arm orientations based on the Bayesian probability of the hand positions measured in advance. In experiments, the proposed method was used to measure the hand positions with HTC VIVE. The results showed that the proposed method estimated orientations with an error rate of about 19%, but the possibility of estimating the orientation of any body part without additional devices was demonstrated.

슈퍼컴퓨팅환경에서의 대규모 계산 작업 처리 기술 연구 (HTCaaS(High Throughput Computing as a Service) in Supercomputing Environment)

  • 김석규;김직수;김상완;노승우;김서영;황순욱
    • 한국콘텐츠학회논문지
    • /
    • 제14권5호
    • /
    • pp.8-17
    • /
    • 2014
  • 슈퍼컴퓨팅 자원들은 주로 MPI와 같은 메시지 교환 인터페이스에 기반한 통신 집적도가 높은 고성능 컴퓨팅(HPC: High Performance Computing) 응용 분야를 지원하는데 활용되어 왔다. 반면에, 대규모 계산처리 컴퓨팅(HTC: High Throughput Computing) 방식의 패러다임은 주로 계산 집적도가 높고(상대적으로 적은 I/O 연산), 독립적인(작업들 간의 통신이 적음) 많은 수의 작업을 처리하는 것을 요구하고 있다. 국내에서도 고에너지 물리, 신약개발, 핵물리와 같은 연구 분야를 중심으로 대규모 컴퓨팅 자원을 요구하는 계산처리에 대한 수요가 증가하고 있다. 본 논문에서는 이러한 HTC 과학 응용들에 대한 효율적인 지원을 국가차원의 슈퍼컴퓨팅 분산 환경에서 제공하기 위해 연구/개발되어진 대규모 계산처리 서비스(HTCaaS: High Throughput Computing as a Service)의 전체 구조 및 구성 요소, 실행 시나리오 및 실제 응용 적용 사례 등에 대해 서술한다.

Torrefaction and Hydrothermal Carbonization (HTC) of Dead Leaves

  • Saqib, Najam Ul;Park, Seong-Kyu;Lee, Jai-Young
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제19권5호
    • /
    • pp.45-52
    • /
    • 2014
  • Torrefaction and hydrothermal carbonization (HTC) are productive methods to reclaim energy from lignocellulosic biomass. The hydrophobic, homogenized, energy dense and carbon rich solid fuel can be obtain from torrefaction and hydrothermal carbonization. Dead leaves were carbonized in a stainless steel reactor of volume 200 ml with torrefaction ($250-270^{\circ}C$) for 120 minutes and hydrothermal carbonization ($200-250^{\circ}C$) for 30 minutes, with mass yield solid fuel ranging from 57-70% and energy content from 16.81MJ/kg to 22.01 MJ/kg compare to the biomass. The char produced from torrefaction process possess high energy content than hydrothermal carbonization. The highest energy yield of 89.96% was obtained by torrefaction at $250^{\circ}C$. The energy densification ratio fluctuated in between 1.15 to 1.30. On the basis of pore size distribution of the chars, the definition of the International Union of Pure and Applied Chemistry (IUPAC) was used as a classification standard. The pore diameter was ranging within 11.09-19 nm which play important role in water holding capacity in soil. Larger pores can hold water and provide passage for small pores. Therefore, it can be concluded that high pore size char can be obtained my HTC process and high energy content char of 22.01 MJ/Kg with 34.04% increase in energy can be obtain by torrefaction process.

열수가압탄화공법을 적용한 유기성 슬러지의 응용 블록 제조에 관한 연구 (Recycling Organic Sludge into Modification Block by Hydrothermal Carbonization (HTC))

  • 박혜원;오민아;오승진;조우리;장진만;이재영
    • 청정기술
    • /
    • 제29권2호
    • /
    • pp.102-108
    • /
    • 2023
  • 본 연구는 열수가압탄화공법(HTC)을 적용하여 하수슬러지를 탄화시켜 폐기물관리법에 따른 재활용 제품 기준을 만족하고, 응용 블록으로서의 재활용 가능성을 판단하였다. HTC 최적 반응온도와 시간을 통해 생성된 탄화 슬러지에 시멘트를 배합비 별로 배합하여 응용 블록의 공시체를 제작하였고, 중금속 용출 가능성과 성능분석을 진행하였다. 실험 결과 모든 응용 블록에서 중금속이 검출되지 않았으며, 성능분석의 비중과 흡수율의 경우 1.7 미만, 10% 이하의 해당 기준치를 만족하였다. 압축강도의 경우 28일 재령 기준으로 시멘트 5%, 7%의 배합비 경우 A, B, C종 블록 기준치에 만족하였으나, 시멘트 3%의 배합비 경우 A type 블록 기준에 미치지 못하였다. 이후 추가적인 재령을 진행한 결과 42일 차 재령 강도에서 A종 블록 기준을 만족하였다. 따라서 본 연구의 탄화 슬러지와 시멘트의 최적 배합비는 3% 이상 5% 이내로 판단하였으며 향후 응용 블록을 골재로서의 재활용 가능성을 확인하였다.

하이브리드 궤도회로 시험방법 및 절차에 관한 연구 (Study on Test methods and Procedures of Hybrid Track Circuit)

  • 권부석;정호형;이기서;이창룡
    • 한국전자통신학회논문지
    • /
    • 제9권3호
    • /
    • pp.335-342
    • /
    • 2014
  • 본 논문에서는 하이브리드 궤도회로(Hybrid Track Circuit : HTC)의 실용화를 위한 시험방법과 그 절차에 대하여 연구하였다. 침목이나 도상 등 다양하고 특수한 선로 환경과 RFID 태그와 리더기, 안테나 구조를 고려한 시험방법을 제시함으로서 하이브리드 궤도회로의 서울메트로 구간 시범설치와 고속열차 구간 적용 연구에 활용이 가능하다. 또한 하이브리드 궤도회로 개발 프로젝트의 산출물 간 인터페이스와 설치방법 및 시험절차 등 안전하고 신뢰성 높은 결과를 도출하기 위한 방법을 제시하였다.

랜덤화 순서와 기하학적 특성을 고려한 분산분석과 실험계획의 응용방안 (Application of ANOVA and DOE by Using Randomized Orders and Geometrical Properties)

  • 최성운
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2012년 춘계학술대회
    • /
    • pp.277-292
    • /
    • 2012
  • The research presents an application of Balanced ANOVA (BANOVA) by utilizing randomized orders for various Split-Plot Designs (SPDs) which include two cell designs, split-plot with one-way HTC (Hard to Control) factor, split-plot with two-way HTC factor, split-split-plot design and nested design. In addition, four MINITAB examples of 2-level split-plot designs based on the number of blocks and the type of whole-plots are presented for practitioners to obtain comprehensive understanding. Furthermore, the geometrical interrelated properties among three typical Designs of Experiments (DOE), such as Factorial Design (FD), Response Surface Design (RSD), and Mixture Design (MD) are discussed in this paper.

  • PDF

연속 시간 선형 주기 시스템에 대한 주기 예측 구간 $H_{\infty}$ 추적 제어 (Intervalwise Receding Horizon $H_{\infty}$ Tracking Control for Continuous Linear Periodic Systems)

  • 김기백;권욱현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 B
    • /
    • pp.1140-1142
    • /
    • 1996
  • In this paper, a fixed-horizon $H_{\infty}$ tracking control (HTC) for continuous time-varying systems is proposed in state-feedback case. The solution is obtained via the dynamic game theory. From HTC, an intervalwise receding horizon $H_{\infty}$ tracking control (IHTC) for continuous periodic systems is obtained using the intervalwise strategy. The conditions under which IHTC stabilizes the closed-loop system are proposed. Under proposed stability conditions, it is shown that IHTC guarantees the $H_{\infty}$-norm bound.

  • PDF