• 대한전자공학회논문지SD
• /
• 제40권5호
• /
• pp.285-289
• /
• 2003

본 논문에서는 실리콘 기판상의 전송선로 특성을 개선하기 위하여 표면 마이크로머시닝 기술과 새로운 산화법(H₂O/O₂ 분위기에서 500℃, 1시간 열산화와 1050℃, 2 분간 RTO(Rapid Thermal Oxidation) 공정)을 이용하여 10 ㎛ 두께의 다공질 실리콘 산화막(oxidized porous silicon:OPS) air-bridge 기판 위에 공면 전송선로(Coplanar Waveguide:CPW)를 제작하였다. 간격이 40 ㎛ 신호선이 20 ㎛ 전송선 길이가 2.2 mm인 CPW air-bridge 전송선의 삽입손실은 4 GH에서 -0.28 dB이며, 반사손실은 -22.3 유를 나타내었다. OPS air-bridge 위에 형성된 CPW의 손실이 OPS층 위에 형성된 CPW의 삽입손실보다 약 1 dB 정도 적은 것을 보여주었으며, 반사손실은 35 GHz 범위에서 약 -20 dB를 넘지 않고 있다. 이와 같은 결과로부터 두꺼운 다공질 실리콘 멤브레인 및 air-bridge 구조는 고 저항 실리콘 집적회로 공정에서 고성능, 저가의 마이크로파 및 밀리미터파 회로 응용에 충분히 활용 될 수 있으리라 기대된다.

• 대한지역사회영양학회지
• /
• 제15권4호
• /
• pp.485-497
• /
• 2010

The purpose of this study was to investigate effects of the developed nutrition education program focused on individual daily energy requirements and food exchange units using Food Exchange System for diabetes mellitus at a community health center. Developed the nutrition education program, four weeks' nutrition education including provided twice individual meal as diet therapy (2 hour/lesson/week, 4 week), was provided to 20 diabetic elderly (12 male, 8 female, 50-75 yrs): 1st lesson "Introduction: management of diabetes mellitus", 2nd lesson "6 Food groups and sources of 6 food groups", 3rd lesson "Individual daily energy requirements and food exchange units", and 4th lesson "Food choice for diabetes mellitus". For effects' analysis of the developed program, we assessed the changes in anthropometric characteristics; biochemical characteristics and nutrient intakes using 24 hr recall method. Effects of the developed nutrition education program were as follows: weight was significantly decreased, blood urea nitrogen (BUN) and glycosylated hemoglobin (HbA1c) were significantly decreased, and distribution of subjects in BUN and HbA1c was significantly changed. In protein : fat : carbohydrate (PFC) ratio, it was significantly changed from 15.98 : 16.30 : 66.69 to 17.51 : 18.94 : 64.10. In evaluation of nutrient intakes by Dietary Reference Intakes for Koreans (KDRI), protein, fiber, fat, vitamin E, niacin, folic acid, calcium and zinc were shown significantly positive changes in distribution of subjects according to intake level. The index of nutrition quality (INQ), nutrition adequacy ratio (NAR) and mean nutrition adequacy ratio (MAR) were significantly increased. In conclusion, the developed 4 weeks' nutrition education program focused on individual daily energy requirements and food exchange units using Food Exchange System for diabetes mellitus at community health center may improve the symptom of diabetes mellitus.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.310-316
• /
• 2010

Recently a fuel oil of the diesel engine of the marine ship is being changed with heavy oil of low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine such as cylinder liner, piston crown, spindle and seat ring of exhaust valves are predominantly increased. In particular the degree of wear and corrosion of piston crown is more seriously compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weldment of the piston crown is a unique method to prolong the its life in a economical point of view. In this case, filler metals having a high corrosion and wear resistance such as stellite 6, Inconel 625 and Inconel 718 are mainly being used for repair welding. However it has been often happened that piston crown on the ship,s job site is being actually inevitably welded with mild filler metals. Therefore in this study, filler metals such as E4301, E4313 and E4316 were welded at SS401 steel as the base metal, and corrosion property of their weld metals in the case of post weld heat treatment or not was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 0.1% $H_2SO_4$ solution. Corrosion resistance of the weld metal of E4301 was better than the other weld metals in the case of no heat treatment, however, its resistance was considerably decreased with post weld heat treatment(annealing:$625^{\circ}C$, 2 hr) compared to other weld metals. The weld metals of E4313 and E4316 showed a relatively good corrosion resistance by post weld heat treatment.

• 한국식품저장유통학회지
• /
• 제13권1호
• /
• pp.77-82
• /
• 2006

본 연구에서는 혈전용해능이 우수한 균주를 선별하여 청국장의 발효 특성을 비교 조사하였다. 시판청국장에서 분리된 5종 균주의 혈전용해능을 비교한 결과, N2가 $41.7\%$(Plasmin lunit/mL과 비교)로 가장 높게 나타났고 N3, N5가 각각 $27.8\%$를 나타내었다. N2 균주의 kit동정 결과, B. subtilis와 $90.1\%$ 유사한 균주로 나타났다. 이를 활용하여 청국장을 제조한 결과, 분양균주에서는 B. subtilis (KCTC 3014)가 가장 많은 점질물을 생성하였고, 혈전용해능과 아미노태질소 함량도 가장 높은 것으로 나타났다. 그리고 분리균주에서는 B. subtilis N2가 점질물 함량, 혈전용해능, 아미노태질소 함량이 가장 높은 것으로 나타났다. 증자시간에 따른 영향을 조사한 결과 B. subtilis (KCTC 3014)와 B. subtilis N2를 접종한 청국장은 증자시간을 45분이 적합한 것으로 나타났으며, 발효시 간은 20시간정도가 적합한 것으로 나타났다.

• 한국식품저장유통학회지
• /
• 제10권2호
• /
• pp.182-186
• /
• 2003

해양 심층수염과 천일염을 이용하여 무를 절임할 경우 수축율, 염도, 물성의 특성 변화를 관찰하였다. 해양 심층수염을 가지고 무를 절임할 경우 품질 변화를 살펴본 결과 수축률은 절임 8시간 이후에 해양심층수염으로 절임한 경우가 천일염으로 절임한 경우보다 큰 것으로 나타났으며, 해양심층수염이 천일염보다 더 높은 염도를 나타내며 절임 되었다. 젤리강도는 절임시간이 증가함에 따라 감소하는 경향을 나타내었으며, 절임 염도가 높을수록 젤리강도는 낮아지는 경향을 나타내었다. 염장시간 초기때는 해양 심층수염이 천일염보다 젤리강도를 더 낮게 낮추는 것으로 나타났으며 염장시간 16시간 이후부터는 해양 심층수염이 천일염보다 더높은 젤리 강도를 나타내는 경향을 나타내었다. 무의 연도는 심층수염이 천일염보다 높은 값을 나타냄으로서 해양 심층수염에 절일 때 더 부드러운 물성을 나타냄을 볼 수 있었다. 견고성은 해양 심층수염에 절임하는 것이 천일염에 절임하는 것보다 더 높은 값을 나타났다. 해양 심층수염이 천일염보다 빨리 무 조직에 손상을 줌으로 절임을 단축시키지만 절임시간이 연장되면 오히려 무 조직의 손상을 완화시키는 것으로 나타났다. 이러한 차이는 김치맛과 발효에도 영향을 미치는 품질 요인이 될 수 있을 것으로 판단되며, 해양 심층수염을 이용하여 김치 발효시 특성 변화에 대한 더 구체적인 연구가 필요하리라 사료된다.

• 한국재료학회지
• /
• 제26권3호
• /
• pp.109-116
• /
• 2016

To achieve the fabrication of high-quality Ag-coated Cu particles through a wet chemical process, we reported herein pretreatment conditions using an ammonium-based mixed solvent for the removal of a $Cu_2O$ layer on Cu particles that were oxidized in air for 1 hr at $200^{\circ}C$ or for 3 days at room temperature. Furthermore, we discussed the results of post-Ag plating with respect to removal level of the oxide layer. X-ray diffraction results revealed that the removal rate of the oxide layer is directly proportional to the concentration of the pretreatment solvent. With the results of Auger electron spectroscopy using oxidized Cu plates, the concentrations required to completely remove 50-nm-thick and 2-nm-thick oxides within 5 min were determined to be X2.5 and X0.13. However, the optimal concentrations in an actual Ag plating process using Cu powder increased to X0.4 and X0.5, respectively, because the oxidation in powder may be accelerated and the complete removal of oxide should be tuned to the thickest oxide layer among all the particles. Back-scattered electron images showed the formation of pure fine Ag particles instead of a uniform and smooth Ag coating in the Ag plating performed after incomplete removal of the oxide layer, indicating that the remaining oxide layer obstructs heterogeneous nucleation and plating by reduced Ag atoms.

• Preventive Nutrition and Food Science
• /
• 제4권4호
• /
• pp.246-250
• /
• 1999

This study was conducted to develop the fermentation kinetic modeling for the prediction of pH and acidity changes in kimchi at isothermal and nonisothermal fermentation temperatures(0~15$^{\circ}C$) and salt concentrations(1.5~4.0%) using the traditional two-step method and alternative one-step method. The calculations of the two-step method of pH and acidity change during fermentation followed the pattern of the first order and zero order, respectively. The reaction rate constant of pH by the first order was increased from 0.008 {TEX}$day^{-1}${/TEX} to 0.017 {TEX}$day^{-1}${/TEX} by increasing the temperature from $0^{\circ}C$ to 15$^{\circ}C$ at 2.75% of salt concentration, and was decreased from 0.013 {TEX}$day^{-1}${/TEX} to 0.010 {TEX}$day^{-1}${/TEX} by increasing the salt concentration from 1.5% to 4.0% at 5$^{\circ}C$. For the pH and acidity of Kimchi, the zero order had a higher correlation than the first order to the estimate of the kinetics parameters by the one-step method. The {TEX}$E_{a}${/TEX} ranges of pH and acidity were 61.057~66.086 and 62.417~68.772 kJ/mole with different temperatures and salt concentrations. This one-step method had smaller and more realistic estimates of error(p〈0.05). The effective temperatures, {TEX}$T_{eff}${/TEX}, with 0~15$^{\circ}C$ of square function type of 12 hr intervals were 12.85, 11.48 and 12.46$^{\circ}C$ as increasing the salt concentration, 1.50, 2.75 and 4.00%, respectively. The {TEX}$T_{eff}${/TEX} were higher values than the mean temperature(7.5$^{\circ}C$).

• 대한전기학회논문지
• /
• 제41권5호
• /
• pp.517-524
• /
• 1992

In this study, 0.10Pb(SbS11/2TSnS11/2T)OS13T-(0.90-x)PbZrOS13T (0.25 x 0.40) ceramics were fabricated by the atmospheric method. The sintering temperature and time were 1250[$^{\circ}C$] and 2[2hr], respectively. The structureal, dielectric and piezoelectric properties with composition of PbTiOS13T were studied. As the results of XRD ans SEM, the crystal structure of a specimen was rhombohedral, lattice constant and average grain size were decreased with increasing the contents of PbTiOS13T. Relative dielectric constant and Curie temperature were increased with increasing the contents of PbTiOS13T, 0.10PSS-0.40PT-0.50PZ specimen had the highest values of 904 and 265[$^{\circ}C$], respectively. In increasing of PbTiOS13T contents form 25[mol%] to 40[mol%], piezoelectric charge constant and electromechanical coupling factors were increased form 114[pC/N] to 142[pC/N], 17[%] to 24[%] and mechanical quality factor were decreased with increasing the contents of PbTiOS13T. In the 0.10PSS-0.40PT-0.50PZ specimens, those values were 14.2[kV/cm] and 9.43[x10S0-6TC/cmS02T], resectively.

• 한국산림과학회지
• /
• 제96권2호
• /
• pp.178-182
• /
• 2007

Rauvolfia serpentina (L.) Benth. ex Kurz is a medicinal plant and an endangered tropical rainforest plant species. Since the field cultivation that aims to fulfill the industrial needs is never accomplished, tissue culture appears to be the most feasible way to improve the quality and quantity of R. serpentina. This experiment used two kinds of explants (roots and shoots) to induce optimal root formation in different combinations of auxin and photoperiod. Each explants exhibited different responses on given treatments. Differentiated root could be produced from explants cultured in IBA 20 mg/L with and without light. The highest number of roots, root length and root weight induced from shoot explants were effective on MS medium containing IBA 20 mg/L and incubated under dark condition, while highest total weight (callus and root) from root explants cultured on MS medium supplemented 10 mg/L IBA and 10 mg/L NAA and incubated under day length (11/13 hr). The root induced from shoot explants produced the highest major alkaloid content. The highest content of ajmaline (2.17 ppm fresh weight) and reserpine (1.30 ppm fresh weight) were observed in shoot explants cultured in MS medium containing combination of IBA 10 mg/L and NAA 10 mg/L and incubated under dark condition, yohimbine (1.47 ppm fresh weight) was in the shoot explants cultured in MS medium containing NAA 20 mg/L and incubated under day length, while serpentine was absent.

• 한국조경학회지
• /
• 제31권6호
• /
• pp.95-103
• /
• 2004

A turfgrass rootzone foundation is one of the important iufluences on the growth of cool-season turfgrass such as Kentucky bluegrass, which is usually grown on korean golf courses and athletic fields in Korea. This study was carried out to evaluate the growth of Kentucky bluegrass on 4 types of turfgrass root-zone foundations: a 2cm thickness of Sand 90%+Peat humus 8%+Zeolite 2% mixture on a subsoil base (C), a 20cm thickness of Sand 90%+Peat humus 8%+Zeolite 2% mixture (S), a 20cm thickness of Sand 45%+fine sand(a sort of Bomyungsa) 45%+Peat humus 8%+Zeolite 2% mixture (S+F), and a 20cm thickness of Sand 45%+fine sand(a sort of Bomyungsa) 45%+Peat humus 8%+Zeolite 2% mixture on a 20cm thick drainage layer (S+F(G)). Visual ratings of Kentucky bluegrass on the C foundation were low throughout the experiment when compared to S, S+F, and S+F(G) foundations, which contained high contents of sand with a high water infiltration rate. However, poor growth of Kentucky bluegrass in the summer of 1991 on the S foundation was likely to be caused by a too high water infiltration rate (185.8cm/hr). The growth of Kentucky bluegrass on the S+F(G) was good while the growth was a little weak at the developing stage on the S +F foundation. If the cost had to be considered when constructing golf courses and athletic fields, The S+F foundation without the drainage layer would be the best choice in terms of low cost and good quality of Kentucky bluegrass compared to the S+F(G). In this result, the infiltration rate was regarded as the most influential factor to the growth of Kentucky bluegrass on rootzone foundations.