• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.6
• /
• pp.119-127
• /
• 2003

This paper documents recent efforts to validate the GIS-based hydrologic models, HEC-HMS and HEC-GeoHMS by the US Army Corps of Engineers. HMS and Geo-HMS were used to simulate storm runoff from a small rural watershed, the Balan HS#6. The watershed is 3.85 $\textrm{km}^2$ in size. The watershed topographic, soils, and land use data were processed using the GIS tool fur the models. Input parameters were retrieved and calibrated with the field data. The simulated peak runoff, time to peak, and total direct runoff fer twenty three storms were compared with the observed data. The results showed that the coefficient of determination($R^2$) for the observed peak runoff was 0.95 and an error, RMSE, 3.08 $\textrm{m}^3$/s for calibration stages. In the model verifications, $R^2$ was 0.89 and RMSE 6.79 $\textrm{m}^3$/s, which were slightly less accurate than the calibrated data. The simulated flood hydrographs were well compared to the observed. It was concluded that HMS and GeoHMS are applicable to flood analyses for rural watersheds.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.157-165
• /
• 2000

The applicability and performance of HMS-25 as the railroad roadbed materials were evaluated through the model and laboratory tests. The uniaxial compression test of HMS-25, model soil box test, and combined resonant column and torsional shear test were performed for static and dynamic analysis of railroad roadbed. The uniaxial compression test result of HMS-25 shows steady increase in strength due to hardening chemical reaction between HMS-25 and water. The result of model soil box test reveals that railroad roadbed of HMS-25 is better than that of soil in several aspects such as bearing capacity and settlement. The combined resonant column and torsional that shear test result indicates that shear modulus of HMS-25 increases with the power of 0.5 to the confining pressure and that shear modulus increases with the increase of curing period.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.36-40
• /
• 2006

The objective of the study is to develop a GIS-based flood map. Hydraulic model (HEC-RAS) is linked with hydrologic model (HEC-HMS) for flood map. Geospatial data processors, HEC-GeoHMS and HEC-GeoRAS, are used for operating HEC-HMS and HEC-RAS. HEC-HMS was calibrated and validated at the Hwa-Ong watershed. HEC-HMS was used for calculating runoff from the Hwa-Ong watershed which consisted of Nam-Yang, Ja-An, U-Eun river sub-watersheds, and HEC-RAS was applied and validated for river flow routing at the Hwa-Ong watershed. The simulated results from HEC-HMS and HEC-RAS were reasonably good compared with the observed data. HEC-RAS and HEC-HMS were applied to simulate flooding from probability rainfall at the Hwa-Ong watershed, and the simulated result was used to develop a flood map. Flood map developed in this study will be used for mitigating and predicting the flood damages.

• Journal of Industrial Technology
• /
• v.22 no.A
• /
• pp.211-218
• /
• 2002

HEC-HMS model should be calibrated to be applied to these basins in Gangwon-do unlike the general basins. In the study, it is investigated whether the HEC-HMS model may be applied or not to Naerinchon basin where is the typical basin of Gangwon-do Additionally, the straightforword module of HEC-HMS for simulating the hydrologic characteristic of Gangwon-do basins well will be suggested by comparison of the numerical results with the observed data. The hydrologic results estimated by several modules such as Clark, SCS and Snyder methods in HEC-HMS model have been compared with the observed data for 1999~2000 storm events. It is concluded that Clark method are relatively applicable to the basins in Gangwon-do rather than the others methods. The parametric studies for HEC-HMS model should be studied further in order to apply to Gangwon-do basins more accurately.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2003.05a
• /
• pp.38-41
• /
• 2003

• Environmental Engineering Research
• /
• v.20 no.3
• /
• pp.212-222
• /
• 2015

Experiments were conducted on the immobilization of eight heavy metals (HMs) (Zn, Cu, Mn, Fe, Ni, Pb, Cd, and Cr) during 20-day rotary drum composting of water hyacinth. The Tessier sequential extraction procedure was used to investigate the fractionation of HMs. The eco-toxicity risk of HMs was assessed by risk assessment code (RAC). In the results, the bioavailability factor (BAF) for different HMs presented in the following order: Mn > Zn = Fe > Cu > Cr > Cd = Pb > Ni. The total concentration of Pb was higher than that of Zn, Cu, Mn, Cd and Cr; however, its BAF was the lowest among these HMs. These results confirmed that the eco-toxicity of HMs depends on bioavailable fractions rather than on the total concentration. The greatest reduction in bioavailability and eco-toxicity risk of HMs occurred in lime 1% and 2% as compared to control and lime 3%. The eco-toxicity risk of Fe, Ni, Pb, Cd and Cr was reduced from low risk to zero risk by rotary drum composting. These studies demonstrated the high efficiency of the rotary drum for degrading compost materials and for reducing the bioavailability and eco-toxicity risk of HMs during the composting process.

• Spatial Information Research
• /
• v.10 no.2
• /
• pp.275-287
• /
• 2002

Rainfall-Runoff Analysis in Whangryong River Basin was made using HEC-HMS and HEC-GeoHMS. The Basin was divided into three sub-basins using HEC-CeoHMS and GIS. Then, GIS input data were derived from each sub-basins. SCS CN runoff-volume model, Snyder's UH direct-runoff model, exponential recession baseflow model and Muskingum routing model in HEC-HMS were used to simulate the runoff volume using selected rainfall event and the parameters were optimized. Peak flowrate calculated using optimized parameters was compared to the observed flowrate in the basin. The result proved to be good agreement with each other. Optimized parameters in this local basin can be used to calculate the peak flowrate in the future.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.281-284
• /
• 2002

Geographic Information System (GIS) has advantage of analyzing spatial distributed data and handling spatial data for hydrologic analysis. Hydrologic Engineering Center's Hydrologic Modeling System(HEC-HMS) with HEC-GeoHMS was used to analyze flood runoff at agricultural small watershed. HEC-GeoHMS, which is an ArcView GIS extension designed to process geospatial data for HEC-HMS, is a useful tool for storing, managing, analyzing, and displaying spatially distributed data. Hydroligical component including peak discharge, time to peak, direct runoff, baseflow for Balhan study watershed, which is located in Whasung city, Kyunggi province, having an area of $29.79km^2$, were calculated using the HEC-HMS model with HEC-GeoHMS.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.4
• /
• pp.23-31
• /
• 2007

The objective of the study is to prepare input data for FIA (Flood Inundation Analysis) & FDA (Flood Damage Assessment) through rainfall-runoff simulation by HEC-HMS model. For HwaOng watershed (235.6 $km^{2}$), HEC-HMS was calibrated using 6 storm events. Geospatial data processors, HEC-GeoHMS is used for HEC-HMS basin input data. The parameters of rainfall loss rate and unit hydrograph are optimized from the observed data. HEC-HMS was applied to simulate rainfall-runoff relation to frequency storm at the HwaOng watershed. The results will be used for mitigating and predicting the flood damage after river routing and inundation propagation analysis through various flood scenarios.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.1
• /
• pp.57-60
• /
• 2007

Superconducting electric power devices need to stack HTS wires to increase the current carrying capacity. Uniform multi-stacked wires(UMS) which were made of the same HTS wires have been used. This paper shows the magnetization loss of hybrid multi-stacked(HMS) wire made of BSCCO wires and YBCO wires. Five HMS wires, YB(YBCO-BSCCO), YYBB. YBYB, YBBY and BYYB, were made and tested. Magnetization losses of each UMS wire were compared with corresponding HMS wire. Test results show that magnetization losses per unit length of HMS wire are between the corresponding UMS BSCCO wire and HMS YBCO wire below critical magnetic field. Above the critical magnetic field, magnetization losses of HMS wires are larger than that of corresponding both VMS wires.