• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.468-473
• /
• 2004

This paper deal with basic concept of Hardware In the Loop System(HILS) for hydraulic excavator. Hydraulic excavator has many nonlinearities because of P-Q diagram, dead zone and saturation of valve, single acting cylinder, heavy manipulator. So, actual test is needed when new component or control algorithm is developed but many restrictions exist. Hydraulic circuit of excavator is too complex to model mathematically but dynamic equation of manipulator has made good progress in previous studies. Basic concept of HILS and AMESim model of hydraulic components is contained in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2564-2566
• /
• 2000

HILS(Hardware In-the-Loop Simulation) is an effective tool for design, performance evaluation and test of developed vehicle subsystems such as ABS(Antilock Brake System), suspension, and steering systems. This paper describes a HILS model for an ABS/ASR application. Also the implementation of HILS system for performance test of the ABS ECU(Electronic Control Unit) for commercial vehicles is presented.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.203-209
• /
• 2007

As the vehicle electronic control technology quickly grows and becomes more sophisticated, a more efficient means than the traditional in-vehicle driving test is required for the design, testing, and tuning of electronic control units (ECU). For this purpose, the hardware-in-the-loop simulation (HILS) scheme is very promising, since significant portions of actual driving test procedures can be replaced by HIL simulation. The HILS incorporates hardware components in the numerical simulation environment, and this yields results with better credibility than pure numerical simulations can offer. In this study, a HILS system has been developed for ESP (Electronic Stability Program) ECUs. The system consists of the hardware component, which that includes the hydraulic brake mechanism and an ESP ECU, the software component, which virtually implements vehicle dynamics with visualization, and the interface component, which links these two parts together. The validity of HIL simulation is largely contingent upon the accuracy of the vehicle model. To account for this, the HILS system in this research used the commercial software CarSim to generate a detailed full vehicle model, and its parameters were set by using design data, SPMD (Suspension Parameter Measurement Device) data, and data from actual vehicle tests. Using the developed HILS system, performance of a commercial ESP ECU was evaluated for a virtual vehicle under various driving conditions. This HILS system, with its reliability, will be used in various applications that include durability testing, benchmarking and comparison of commercial ECUs, and detection of fault and malfunction of ESP ECUs.

• 한국정보통신학회논문지
• /
• 제25권11호
• /
• pp.1612-1618
• /
• 2021

Telegraph 제어기는 선박의 속도제어에 사용되는 장치로 선원의 안전에 매우 직접적인 영향이 미치는 기자재이다. 이에 선주는 Telegraph 제어기에 대해 매우 높은 신뢰성을 요구하고 있으며, 선급에서는 신뢰성 검증을 위한 방법으로 HILS(hardware in loop system)테스트를 도입하고 있는 추세이다. 이에, 본 논문에서는 Telegraph 제어기의 HILS 테스트를 수행하기 위한, 전기추진선박을 모델링하였다. 모델링을 위해, 전기추진터그보트의 사양을 정의하고, 배터리, 추진전동기, 선박모델 파트 등에 대해 모델링 하였다. 또한, 다양한 운전시나리오를 정의하고 이에 따라 Telegraph 제어기를 모델링하였다. 마지막으로 통합 모델에 대한 결과를 시뮬레이션을 통해 확인하였다.

• 대한임베디드공학회논문지
• /
• 제9권4호
• /
• pp.211-217
• /
• 2014

Cyber-Physical Systems(CPS) that mostly provides safety-critical and mission-critical services requires high reliability, so that system testing is an essential and important process. Hardware-In-the-Loop Simulation(HILS) is one of the extensively used techniques for testing hardware systems. However, most conventional HILS has problems that it is difficult to support a distributed operating environment and to reuse a HILS platform. In this paper, we introduce EcoHILS(ETRI CPS Open Human-Interactive hardware-in-the-Loop Simulator) in order to test CPS effectively. Moreover, feasibility tests and performance tests of EcoHILS are performed to confirm its effectiveness.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.566-572
• /
• 2013

A microgrid is a small scale power system. The microgrid is operated in two operation modes, the grid-connected mode and the islanded mode. In the islanded mode, the frequency of a microgrid should be maintained constantly. For this, the balance between power supply and power demand during islanded mode should be met. In general, energy storage systems (ESSs) are used to solve power imbalance. In this paper, the frequency control effect of a Lithium-ion battery energy storage system (Li-ion BESS) has been tested on the hardware-in-the loop simulation (HILS) system environment.

• 제어로봇시스템학회논문지
• /
• 제7권5호
• /
• pp.432-437
• /
• 2001

Korea High Speed Train(KHST) is supposed to run up 350km/h, in which the braking system has a crucial role for the safety of the train. In the design st데 of the braking system, its very hard to ac-quire information data for design guidelines. A HILS(Hardware-In-the-Loop Simulation) system can be used to get design data which could simulate the braking system of the real train in real-time. In this paper, cars are modelled including car dynamics, brake blending algorithms, pneumatic actuator dynamics, the models of each braking devices, adhesive coefficients, and soon. Real-time braking time, distance, and other design parameters are simulated using a DSP board and C language which shows the validity of the proposed method.

• 풍력에너지저널
• /
• 제15권1호
• /
• pp.60-68
• /
• 2024

In this study, a hardware-in-the-loop simulation (HILS) environment was established using MATLAB/Simulink to simulate and verify the power performance of a wind turbine. The target wind turbine was selected as the NREL 5 MW model, and modeling was performed based on the disclosed specifications. The HILS environment consists of a PC equipped with a MATLAB/Simulink program, a programmable logic controller (PLC) for uploading and linking control algorithms, and data acquisition (DAQ) equipment to manage wind turbine data input and output. The operation of the HILS environment was carried out as a procedure of operation (PC) of the target wind turbine modeled based on MATLAB/Simulink, data acquisition (PLC) of control algorithms, control command calculation (PLC), and control command input (PC). The simulation was performed using the HILS environment under turbulent wind conditions and compared with the simulation results performed under the same conditions in the HILS environment using the commercial program Bladed for performance verification. From the comparison, it was found that the dynamic simulation results of the Bladed HILS and the MATLAB HILS were close in power performances and the errors in the average values of rotor rotation speed and power generation between the two simulations were about 0.44 % and 3.3 %, respectively.

• 한국전자파학회논문지
• /
• 제29권11호
• /
• pp.898-905
• /
• 2018

본 논문에서는 대지, 대공 표적을 포착 추적할 수 있는 적외선 및 가시광 센서가 탑재된 이종센서 영상탐색기의 종합 성능시험을 위해 구축한 HILS(Hardware In-the-Loop Simulation) 시스템 내에 적외선 표적원을 제안한다. 이 통합시스템은 다양한 종류의 표적과 시나리오 기반 이동 표적의 궤적을 모사하기 위해 열원 및 광원을 출력하는 100개의 모듈로 구성하였다. 또한 표적에 대한 위치, 속도, 방향, 배경 클러터와 재밍 환경 등을 모사할 수 있다. 이종센서 영상탐색기의 시험평가를 위해 구축된 HILS 시스템의 전체 시스템 구성과 적외선 표적원의 설계 및 측정 결과를 제시한다. 향후에, 구축된 HILS 시스템에서 모의비행 시나리오 기반으로 동적 실시간 포착 추적에 대한 단일 또는 이종센서가 탑재된 이종센서 영상탐색기의 성능을 시험할 예정이다.

• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.130-137
• /
• 2013

In this paper, decoupled controller design for Autonomous Underwater Vehicle(AUV) and its simulated performance test results and Hardware In the Loop Simulation(HILS) results are presented. Control system design is done using the PD control scheme. Stability analysis and step response of closed loop system under uncertain parameter condition are also presented. The results of full coupled nonlinear model simulation show the well applicability of the designed controller. From the results of HILS, we can verify performance of real time processing and implemented hardware for AUV.