• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.9-15
• /
• 2004

In this paper, a HILS(Hardware-In-the-Loop-Simulation) System designed for an unmanned airship, which is under development by KARI, is introduced. A HILS system is essential to validate flight control systems on the ground. The HILS system consists of several systems: a virtual ADT(airborne data terminal) system, a virtual payload system, a virtual airship system, and a status display system. Also, a 3-axis motion table and an inertial navigation sensor are included. The reliability of the flight control computer has been validated by HILS tests.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.317-319
• /
• 2003

HILS(Hardware In-the Loop Simulation) is commonly used in the development and testing of embedded systems, when those systems cannot be tested easily, thoroughly, and repeated in their operational environments. HILS can be a useful tool to develop products more quickly and cost effectively and also reduces the possibility of serious defects being discovered after production. During the product development period, Design optimization and hardware/software debugging can be performed using HILS skill. This paper describes a HILS model for the STG(Steam-Turbine Generator) Simulator to prove the performance of the developed Digital Governor. It is developed using software technics which can confirm the responses of a real-time system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.881-887
• /
• 2015

The hardware-in-the-loop simulation (HILS) of a railway vehicle is crucial for overcoming the limitation of field tests of a railway vehicle. A brake HILS system for a railway vehicle was previously not able to test the performance of a speed-sensing system of a railway vehicle, since wheelset speeds were generated only by computer simulations. In this paper, we present a novel wheelset speed implementation of a brake HILS system for a railway vehicle. Four wheelset speeds of a brake HILS system for a car of a railway vehicle are implemented using four small-sized servomotors, whereas the speed sensors and pole wheels used in the brake HILS system are the actual ones of the railway vehicle. According to the simulated speeds of four wheelsets in the dynamic equations of motion, four servomotors generate wheel speeds in real time, and then the measured wheelset speeds are fed back to the computer simulation model. Moreover, in this paper, we improve the performance of wheelset speed measurement via the T method instead of the M method presently used in the field. The performances of wheelset speed implementation and speed-sensor operation are demonstrated by experimental works using a HILS system.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2546-2548
• /
• 2005

본 논문에서는 무인항공기의 비행제어시스템 개발 및 성능분석을 위한 HILS(Hardware-in-the-Loop-Simulation) 시스템의 구축을 제안한다. 제안한 HILS 시스템은 실시간 시뮬레이션 컴퓨터(dSPACE DS1005), 3축 모션테이블, 자세 센서, 지상통제장치(GCS; Ground Control Station), 비행제어컴퓨터(FCC; Flight Control Computer)로 구성된다. 실제 신호와 유사한 신호를 발생시키기 위한 실시간 시뮬레이션 컴퓨터는 dSPACE가 담당하며, 이 신호는 비행운동을 재현을 위한 3축 모션테이블을 동작시키게 된다. 모션테이블 상에 위치하는 자세센서 값과 GCS의 명령은 FCC의 입력으로 사용된다. 구현된 HILS 시스템을 이용하여 UAV의 제어알고리즘 및 자세센서 성능 검증을 수행하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.10
• /
• pp.898-906
• /
• 2002

Antilock Brake System (ABS) is designed to prevent wheels from being locked-up under emergency braking of a vehicle. Therefore it improves directional stability of the vehicle, shortens stopping distance, and enhances maneuvering during braking, regardless of road conditions. Hardware In-the-Loop Simulation (HILS) is an effective tool for design Performance evaluation and test of vehicle subsystems such as ABS, active suspension, and steering systems. This paper describes a HILS model for ABS/ ASR(Acceleration Slip Regulation) system applications. A fourteen degrees-of-freedom vehicle dynamics model is simulated in an alpha-chip processor board. The proposed HILS system is tested with a basic ABS control algorithm. The design and implementation of HILS system for the ABS ECU(Electronic Control Unit) development of commercial vehicle are presented. The results show that the proposed HILS system can be used to test the performance, stability, and reliability of a vehicle under braking.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.172-178
• /
• 2009

Recently, autopilot is essential to reduce pilot's workload and increase flight safety. Avionics system of the small aircraft also has progressively adopted centralized multi-processor and multi-process computing architectures similar to the integrated modular avionics of B-777. It is increased more and more that importance of the flight control system. In this paper, the performance of the autopilot for the small aircraft has been verified with Hardware-In-the-Loop Simulation(HILS). Also, the autopilot algorithm that is operated in the Flight Control Computer(FCC) for the Fly by Wire(FBW) was verified with PILS and compared with the HILS results for the several commercial autopilots.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.47-57
• /
• 2006

This paper presents a network-based traction control system(TCS), where several electric control units (ECUs) are connected by a controller area network(CAN) communication system. The control system consists of four ECUs: the electricthrottle controller, the transmission controller, the engine controller and the traction controller. In order to validate the traction control algorithm of the network-based TCS and evaluate its performance, a Hardware-In-the-Loop Simulation(HILS) environment was developed. Herein we propose a new concept of the HILS environment called the network-based HILS(Net-HILS) for the development and validation of network-based control systems which include smart sensors or actuators. In this study, we report that we have designed a network-based TCS, validated its algorithm and evaluated its performance using Net-HILS.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.566-568
• /
• 1999

HILS is widely used in the test and evaluation of complex control system. This paper describes the structure of HILS and the control loop performance monitoring of HILS system Distal path delay and FMS(Flight Motion Simulator) dynamics were estimated and output of the estimated model were compared with real FMS output. The monitoring system can be used for analyzing the result of HILS.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.103-110
• /
• 2017

Most commercial vehicles have adopted the hydraulic power steering system. To reduce fuel consumption and to improve steering controllability, a hybrid electric power steering system is being developed for commercial vehicles. In this study, the HILS (Hardware In the Loop Simulation) system equipped with a commercial vehicle hybrid electric power steering system was developed and the vehicle dynamic performance of a truck with the steering system was evaluated. The hybrid electric power steering system is composed of the EHPS motor pump, column mounted EPS system, and ball nut steering gear box for heavy commercial vehicles. The accuracy of vehicle models equipped with the HILS system was verified with comparisons between the simulation results and field test results. The road reaction forces of the steering system were generated from the vehicle model and verified using field test results. Step steering tests using the verified HILS system were carried out and the performance of a newly developed commercial vehicle hybrid electric power steering system was evaluated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.11
• /
• pp.898-905
• /
• 2018

In this work, infrared targets for a developed hardware-in-the-loop simulation(HILS) system are proposed for a performance test of a dual-sensor imaging seeker equipped with an infrared and a visible sensor that can lock and track for ground and air targets. This integrated system is composed of 100 modules of heat and light sources to simulate various kinds of target and the trajectory of moving targets based on scenarios. It is possible to simulate not only the position, velocity, and direction for these targets but also background clutter and jamming environments. The design and measurement results of an infrared target, such as the HILS system configuration, developed for testing and evaluation of a dual-sensor imaging seeker are described. In the future, it is planned to test the lock-on and tracking performance of an imaging seeker equipped with single or dual sensors dynamically in real time based on a simulation flight scenario in the developed HILS system.