• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.3
• /
• pp.77-81
• /
• 2009

There has been an increasing demand on measurement of the vibration levels in commercial truck shipments, where all packaged products are exposed to some levels of random vibration and shock. In this study, bear glass bottles loaded at the front, middle, and rear positions of 11 tonne truck bed was shipped from Kwangju to Waegouan. Vertical direction vibration levels were analysed and matching laboratory random vibration test was performed using power spectral density (PSD) profiles derived from truck transit records. Also, the effects of drop hight on glass bottles were evaluated. As expected, the maximum vibration levels were recorded at the rear of truck bed. No breakage of bottles were observed during truck transit and laboratory random vibration testing set at 0.52 $G_{rms}$. In drop test, glass bottles were not damaged by bottom side impact, while short side drop impact caused about twice higher bottle breakage rate than that of long side drop impact at 30 cm and 40 cm drop hight.

• Korean Journal of Plant Resources
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1988

This experiment were carried out to study the heritability, genotypic, pheno-typic and environmental correlation in four edible oil crops. Heritabilities of flowering date, maturing date, plant height and weight of 1, 000 grains in rape were high. A highly significant positive correlation was found between flowering date and maturing date, plant hight and ear length, number of pods per ear and flowering date, maturing date and plant hight, The number of seed per pod showed also significant positive correlation with flowering or maturing date as well as with the relationship between weight of 1, 000 grains and plant height or ear length inrapeseed, respectively. Heritabilities of maturing date, length of stem with eapsule and number of seed per capsule were high, in sesame. Genotypic correlation between plant height and length of stem with capsule, length of stem with capsule and number of capsule per plant, number of capsule per plant and weight of 1, 000 grains, weight of 1, 000 grains and yield were highy positive in sesame. Heritabilities of flowering date, length of main stem, weight of 100 grains and number of shells per square meter in peanut were high, There was positive genotypic correlation between length of main stem and yield, number of shells per quare meter and matured seed ratio, number of shells per square meter and yield, 100 grains weight and yield. On the other hand, a significant negative correlation appeared between flowering date and yield. Heritabilities of days to flowering, stem length, stem diameter and weight of 1, 000 grains in perila were high. There was positive genotypic correlation between stem length and stem diameter, number of pods per plant, stem weight etc, between number of internodes and number of pods per plant, stem weight, number of valid branches and number of pods plant as well, respectively. While, a significant negative correlation was observed between number of valid branches and weight of 1, 000 grains, between number of pods per plant and weight of 1, 000 grains.

• Journal of Korean Foot and Ankle Society
• /
• v.13 no.1
• /
• pp.75-79
• /
• 2009

Purpose: To evaluate the outcomes of intra-articular calcaneal fractures treated using AO calcaneal plate surgically. Materails and Methods: Total 15 cases of intra-articular calcaneal fracture that treated with open reduction and internal fixation using AO calcaneal plate were evaluated. The patients were followed over a mean period of 19.8 months. The mean age was 41.6 years. By Sanders classification, there were 2 cases of type II, 10 cases of type III, and 3 cases of type IV. We evaluated radiological outcomes by Bohler angle, Gissane angle, calcaneal hight, calcaneal width and clinical outcomes by Creighton-Nebraska health foundation score. Results: All fractures united at a mean duration of 13.3 weeks. Radiologically, the mean preoperative Bohler angle was $8.5^{\circ}$ and restored to $23.3^{\circ}$. The mean preoperative Gissane angle was $118.7^{\circ}$ and restored to $124.2^{\circ}$. The mean preoperative calcaneal hight was 30.8 mm and restored to 38.9 mm. The mean preoperative calcaneal width was 41.3 mm and restored to 35.3 mm. 10 cases had excellent and good clinical outcomes and 5 cases having fair outcome. Conculsion: In our study, open reduction and internal fixation using AO calcaneal plate showed good results with anatomical restoration of articular surface and stable fixation without late collapse.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1450-1456
• /
• 2015

The received signal strengths according to the propagation distance between a transmitting shore station with a 53 m antenna hight and a receiving ship station with about 6m antenna hight from 700 m upto about 20 km are measured at ship's moving velocity of $5{\pm}1m/s$ using a single carrier signal at 150.0625MHz. In this paper, the path loss exponents at the propagation distance from 700 m to 20km are estimated via minimum-mean-square-error method using the measurements of the received signal strength, and the mean of the estimated path loss exponent become 3.79. The estimated propagation path loss exponents is similar to that calculated based on the field-strength values from 2 km to 20 km in Annex 2 of ITU-R P.1546-4, which is measuring results at maritime VHF at 100 MHz carrier frequency. Therefore, the estimated propagation path loss exponent shall be used as the expected path loss exponents for summer in costal area of South Sea of Korea.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.2
• /
• pp.85-90
• /
• 2014

Ag paste has been used in the front electrode of the Si-solar cell. It is composed by Ag powder, glass frit, binder, solvent and dispersant. The role of the binder and the solvent is to make a flow and a printing property. However, it was not enough to report the printing properties with the variation of binder in the controled viscosity. In this study, we selected 3 kinds of typical binder which were used as binder for the paste in the industry, such as Ethyl cellulose, Hydroxypropyl cellulose and Acrylic. Ag pastes using these were prepared, controled viscosity and printed on the SiNx coated Si wafer. In the 'A paste' used Acrylic binder, printed hight was highest and 'H paste' used Hydroxypropyl cellulose binder was lowest. Because 'H paste' was high viscosity due to the molecular weight, the solvent was added in the paste to control the viscosity. Therefore, the content of solid was lower in 'H paste'. The relative pattern width which is related to the spreading of paste was the best in the case of 'H paste' and 'EH paste' at $30^{\circ}C$. It is thought that the optimization of the relative pattern width is possible for a paste by the controling shear thinning phenomenon. In the case of 'A paste', though printing hight was best, the pattern width was dependant on the temperature.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.415-420
• /
• 2013

U-WHS refers to a means of remote health monitoring service to combine fitness with wellbing. U-WHS is a system which can measure and manage biometric information of patients without any limitation on time and space. In this paper, we performed in order to look into the influence that the encryption module influences on the communication evaluation in the biometric information transmission gone to the smart mobile device and Hospital Information System.In the case of the U-WHS model, the client used the Objective-c programming language for software development of iOS Xcode environment and SEED and HIGHT encryption module was applied. In the case of HIS, the MySQL which is the Websocket API of the HTML5 and relational database management system for the client and inter-server communication was applied. Therefore, in WIFI communication environment, by using wireshark, data transfer rate of the biometric information, delay and loss rate was checked for the evaluation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1225-1236
• /
• 2020

Fuzzing is an automated software testing methodology that dynamically tests the security of software by inputting randomly generated input values outside of the expected range. KISA is releasing open source for standard cryptographic algorithms, and many crypto module developers are developing crypto modules using this source code. If there is a vulnerability in the open source code, the cryptographic library referring to it has a potential vulnerability, which may lead to a security accident that causes enormous losses in the future. Therefore, in this study, an appropriate security policy was established to verify the safety of block cipher source codes such as SEED, HIGHT, and ARIA, and the safety was verified using differential fuzzing. Finally, a total of 45 vulnerabilities were found in the memory bug items and error handling items, and a vulnerability improvement plan to solve them is proposed.

• The Journal of Fisheries Business Administration
• /
• v.37 no.3 s.72
• /
• pp.109-130
• /
• 2006

Rapid economic development has led seafood consumption to its quality - oriented pattern as well as consumer's in China. This study concerns about The First, China is Seafood development background. The Second, China become emboldened seafood causes. The third, seafood consumption has characteristic. The fourth, seafood consumption has the organization of society. The study shows that there are economic developmental periods Chinas has three time. The First time$(1961\sim1983)$ is rapid growth. The Second time$(1984\sim1998)$ is growth accumulate. The third time$(1999\sim)$ is changing on seafood consumption as the consumption of seafood is changed according to economic variables changes in income, price, tastes and population. This changing pattern of seafood consumption is based on economic variables appears toward luxury and convenience seafoods. Consumption of food is also affected by non - economic variables. The most typical non - economic variables leading to changes of seafood consumption is local, seafood culture, $et{\ldots}$ Recently seafood consumption pattern shows that consumers paying more money to get their seafood preference for pursuing its hight growth and varienty.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.5
• /
• pp.19-28
• /
• 2014

Given the structure of Korean mountains, it is more appropriate to apply the relative elevation method than the absolute elevation method. However, so far there were not suitable quantitative methodologies to analyze relative elevation, these analytical concepts were difficult to be utilized in urban environmental planning. This study suggested three methods for analyzing relative elevation, and one method for setting the analytical scope of relative elevation by calculating terrain relief. The results showed that the procedure considering 500m radius of each point and standardizing to 30% of the 7th height ridge was the most effective method to extract the local topography. This methodology is the quantitative tool to be able to conserve local important hills and ridges, and apply to fields of urban environmental planning and ecological restoration, especially urban ecological network.

• Journal of Power Electronics
• /
• v.4 no.1
• /
• pp.12-17
• /
• 2004

In this paper, a practical implementation to reduce leakage flux of a high-frequency inverter based non-contact type power transformer composed of EE-shape ferrite cores is presented for key technology of the next generation medical use X-ray CT scanner system. Design consideration for the unique structure of the non-contact power transformer with 900mm in diameter is also introduced. The complete non-contact transformer is actually arranged by several blocks of the magnetic circuit assembled by using 10 small EE shape cores with 120mm in length. It is experimentally and analytically discussed from a reduced leakage flux viewpoint related to its inductively coupling coefficient. A practical method to lower the leakage flux is described based on effective Copper-Sheet- Treatment placed on EE shape ferrite cores of magnetic circuit.