• Title/Summary/Keyword: HEC-1 모형

Search Result 237, Processing Time 0.031 seconds

Prediction of River Bed Variation using Numerical Model (수치모형을 이용한 하상변동 예측)

  • An, Sang-Jin;Yoon, Seok-Hwan;Beack, Nam-Dae
    • Journal of Korea Water Resources Association
    • /
    • v.35 no.6
    • /
    • pp.693-701
    • /
    • 2002
  • In this study, one dimensional sediment movement numerical model(HEC-6) and semi-two dimensional sediment movement numerical model(GSTARS 2.1) were applied to solve the change of channel geometry in Bocheong stream. GSTARS 2.1 model was applied for the three selected sediment transport formulas(Ackers and White's, Engelund and Hanson, Yang formula) from 1993 to 2000 measured data on each section. The simulation results of Ackers and White formula for long -term bed changes are good when compared to the measured data. The HEC-6 model was applied for the simulation of one dimensional sediment movement for the same period. Comparison of the long-term simulations by GSTARS 2.1 and HEC-6 models with measured data shows that simulations by both models are in fair agreement with measured data in overall trend of the river bed changes. Comparisons of simulated cross sectional bed-elevations with measured data shows that GSTARS 2.1 model gives better agreement with than simulated results bed changes on the HEC-6 model.

Uncertainty Assessment of Single Event Rainfall-Runoff Model Using Bayesian Model (Bayesian 모형을 이용한 단일사상 강우-유출 모형의 불확실성 분석)

  • Kwon, Hyun-Han;Kim, Jang-Gyeong;Lee, Jong-Seok;Na, Bong-Kil
    • Journal of Korea Water Resources Association
    • /
    • v.45 no.5
    • /
    • pp.505-516
    • /
    • 2012
  • The study applies a hydrologic simulation model, HEC-1 developed by Hydrologic Engineering Center to Daecheong dam watershed for modeling hourly inflows of Daecheong dam. Although the HEC-1 model provides an automatic optimization technique for some of the parameters, the built-in optimization model is not sufficient in estimating reliable parameters. In particular, the optimization model often fails to estimate the parameters when a large number of parameters exist. In this regard, a main objective of this study is to develop Bayesian Markov Chain Monte Carlo simulation based HEC-1 model (BHEC-1). The Clark IUH method for transformation of precipitation excess to runoff and the soil conservation service runoff curve method for abstractions were used in Bayesian Monte Carlo simulation. Simulations of runoff at the Daecheong station in the HEC-1 model under Bayesian optimization scheme allow the posterior probability distributions of the hydrograph thus providing uncertainties in rainfall-runoff process. The proposed model showed a powerful performance in terms of estimating model parameters and deriving full uncertainties so that the model can be applied to various hydrologic problems such as frequency curve derivation, dam risk analysis and climate change study.

Evaluation of an Applicability of HEC-RAS 5.0 for 2-D Flood Inundation Analysis (2차원 홍수범람해석을 위한 HEC-RAS 5.0 적용성 평가)

  • Lee, Choon-Ho;Lee, Tae-Geun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.4
    • /
    • pp.726-733
    • /
    • 2016
  • Recently, the flood frequency and magnitude have increased due to heavy rainfall. Considering the present condition, a flood risk map has been published in many countries to raise awareness about flood damage to people. A flood inundation analysis model, which is used to publish the flood risk map, can be classified as river and inland inundation models according to the inundation cause. Although a variety of flood inundation analysis models are utilized both domestically and overseas, their usability is limited by the expensive price, except for the HEC-RAS model developed by U.S. Army Corps of Engineers (USACE). In the situation, the USACE has developed a 2-D HEC-RAS model that can be linked to the existing 1-D model. This model has been released as a beta version under the name, HEC-RAS 5.0. In this study, the HEC-RAS 5.0 model's features, usability, applicability, and accuracy were evaluated by comparing the performances on Gokgyo-cheon with the FLUMEN model, which is used for domestic flood risk mapping. The results of this study will contribute to river inundation analysis in many different ways after the HEC-RAS 5.0 model is stabilized.

Analysis of Runoff in Han Stream through Optimization of Parameter on HEC-1 connected with WMS (WMS와 연계된 HEC-1 모형의 매개변수 최적화를 통한 한천 유역의 유출해석에 관한 연구)

  • Kang, Jeong Hoon;Lee, Eun Tae;Lee, Joo Heon;Park, Sang Chul
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2004.05b
    • /
    • pp.1162-1166
    • /
    • 2004
  • 본 연구에서는 미국의 Environmental Modeling Research Laboratory(EMRL)에서 개발한 지리정보시스템과 수문유출모형이 접목된 WMS(Watershed Modeling System) Ver.6.1 모형을 HEC-1모형과 연계하여 한강수계 안성천의 제1지류인 한천의 유출 해석을 실시하였다. 이를 위해 유역내의 지형특성인자 추출 및 하천망 구성(WMS), 재현기간별 지속시간별 확률강우량 산정(FARD2002), Huff분포법을 이용한 시간분포, ARF(Area Reduction Factor)적용, HEC-1내의 SCS단위도법, Snyder 단위도법, Clark의 유역추적법에 포함된 각각의 매개변수의 최적화를 시도하여 분석하고, 설계 홍수량 산정시 이용될 수 있는 지침 마련을 목적으로 하였다.

  • PDF

Verification of Two Dimensional Hydrodynamic Model Using Velocity Data from Aerial Photo Analysis (항공사진분석 자료를 이용한 2차원 하천흐름 해석모형의 검증)

  • Seo, Il Won;Kim, Sung Eun;Minoura, Yasuhisa;Ishikawa, Tadaharu
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.31 no.6B
    • /
    • pp.515-522
    • /
    • 2011
  • The hydrodynamic models are widely used in the research for analysis of flow characteristics and design of hydraulic structure and river channel. These models need to be calibrated with observed data. But, there are few field data of two-dimensional flow velocity in flood because the direct measurement of the flood flow velocity are very dangerous. For this reason the results of two-dimensional numerical models are usually calibrated and verified with only a few observed data. Moreover, the verification of numerical models for the design flood is usually carried out using the result of one-dimensional model, HEC-RAS. In this study, using the flow velocity profile extracted from the aerial photos of a flood of the Tone River in Japan, two-dimensional numerical models, RAM2 in RAMS, RMA2 in SMS, and one-dimensional numerical model, HEC-RAS which are most widely used in research and design work are verified and the validity for verification of two-dimensional models with HEC-RAS is reviewed. The results showed that the water surface elevation of HEC-RAS, RAM2 and RMA2 models have similar results with observed data. But, the velocity results of RAM2 and RMA2 models in the floodplain have some difference with the velocity from aerial photo analysis. And the velocity result of HEC-RAS has big difference with the sectional averaged value of velocity from aerial photo analysis.

Comparative Assessment of the Conceptual Rainfall Runoff model and HEC-HMS in the Jeungpyeong catchment (증평유역의 개념적 강우-유출모형과 HEC-HMS모형 비교 평가)

  • Park, Ki-Soon;Lee, Hyo-Sang;Lee, Moo-Kyeong
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.977-977
    • /
    • 2012
  • 하천의 유량 측정은 대부분 홍수 예보지역, 댐 상류지역, 대하천 및 유역내 주요지점을 위주로 수행되고 있으나, 중소하천과 소유역에 대한 관측자료는 전무한 실정이다. 그로 인해 중소하천과 소유역 등 미계측 유역에 대한 유량 산정에 어려움이 있다. 본 연구에서는 미계측 유역에 대한 적합한 유량 산정방법의 검토를 위해 미호천의 소유역인 증평유역을 대상으로 9개의 개념적 강우-유출모형(3개의 토양저류모형과 3개의 유역유출모형의 조합)을 적용하였으며, 이에 대한 적용성 검토를 위해 국내 홍수량산정에 많이 활용되고 있는 HEC-HMS 모형으로 비교평가를 실시하였다. 이를 위하여 총 6개의 단기 홍수사상을 Monte Carlo 분석(Nash Sutcliffe Efficiency, NSE*)의 목적함수를 통하여 모형 매개변수의 검정 및 검증을 수행하였다. 두 모형의 단기 유출 모의 결과 검정에서 HEC-HMS는 목적함수값 0.06~1.44(NE S*)의 모형성능을 보여주었으며, 개념적 강우-유출 모형은 0.00~0.66(NES*)의 모형성능을 나타내었다. 개념적 강우-유출 모형과 HEC-HMS모형의 매개변수 최적화를 통한 검증 결과 HEC-HMS는 0.25(NES*)의 목적함수 값을 나타내었고, 9개의 개념적 강우-유출모형은 0.14~0.83(NES*)의 목적함수 값을 나타내었다. 이 중 CWI-3PAR, CWI-2PMP, PDM-3PAR와 PDM-2PMP 모형이 0.16~0.26(NES*)으로 우수한 성능을 보이며, HEC-HMS 모형의 첨두유량 과소평가에 대한 문제점을 해결하였다. 이를 통하여 CWI-3PAR, CWI-2PMP, PDM-3PAR와 PDM-2PMP 모형이 증평유역의 지역화를 위한 단기사상 강우유출모형으로 적합하다고 판단된다. 향후 연구유역을 확장하여 추가적인 연구를 통해 일반화된 결론을 얻을 필요가 있다.

  • PDF

1D, 2D interpretation of stream flooding by HEC-RAS and TELEAMC-2D (HEC-RAS, TELEMAC-2D 모형을 이용한 1, 2차원 하천 범람 해석)

  • Sim, Gyu Hyeon;Song, Si Hoon;Lee, Byung Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.394-394
    • /
    • 2015
  • 급격히 변화하고 있는 산업화와 도시화로 지구 온난화 현상으로 기상이변의 발생빈도가 높아졌고 기후가 불안정하여 예전보다 많은 집중호우가 발생하면서, 홍수로 인한 제내지 침수가 발생되기도 한다. 기후변화로 인한 수재해에 대응하기 위하여 하천 호소 수리 예측 모형의 개선이 필요한 실정이다. 하지만, 자연하천 유역의 강우-유출 상관관계와 지표면 유출현상 및 하도 수리 특성을 자연현상의 복잡성, 강우발생의 시간적 공간적인 발생과정의 임의성, 정확한 해석방법 및 확률 분석에 따르는 불확실성 들을 토대로 단순한 이론과 제한적인 경험공식 등에 의해서 해석, 재현 및 평가를 한다는 것은 매우 어려운 문제이다. 최근 IT 기술의 발전과 더불어, 많은 연구자, 엔지니어들이 기존 수리 수문학적 지식과 IT기술을 융합하여 복잡 다단한 수자원 환경 문제를 해결하고자 한다. 이와 같은 최근 연구 동향에 의거하여, 본 연구에서는 HEC-RAS, TELEMAC-2D 1, 2차원 수리 모형을 연계하여 하천 흐름 분석 및 홍수 범람 해석에 적용하였다. 본 연구에서는 HEC-RAS, TELEMAC 모형을 적용하여 2012년 태풍 '산바(SANBA)'로 인해 홍수 피해를 입은 고령군에 위치한 낙동강 본류 회천 유역(상류 회천교 ~ 하류 도진교)의 하도 내 흐름 분석과 하천 인근 제내지 홍수범람을 예측하였다. 범람해석에 필요한 지형자료를 기초로 하여 각 지형의 조건에 맞게 수치자료를 이용하여 작성하였고, 수자원 정보를 이용하여 유랑, 수위 등 시계열자료를 지류 및 상 하류의 경계조건으로 설정하고, 조도계수 등 하천 기본정보들을 입력하였다. HEC-RAS 모형은 회천교부터 도진교까지 전구간에 대한 종단면과 횡단면별 홍수침수범위 및 홍수위 크기 등 거시적인 1차원 수리해석에 적용하였고, TELEMAC 모형은 HEC-RAS 시뮬레이션 결과를 바탕으로 HEC-RAS에서 나타내기 힘든 2차원 흐름특성, 침수현상 등 일부 범람 구간에 대해 수리해석에 적용하였다. HEC-RAS 시스템은 수공구조물들의 영향과 하천의 영향을 종 횡단면으로 다양한 홍수침수 범위를 1차원으로 나타 낼 수 있으며, TELEMAC 시스템 수리 모의를 통해 얻어진 결과는 유속, 유량, 수심, 하상고 높이 등 2차원으로 나타낼 수 있다. TELEMAC 시스템을 활용한 2차원 분석은 실측자료와 비교적 유사하고 시각, 공간적으로 이해하기 쉽게 표현되므로, 모형 적용성이 우수한 것으로 판단된다. 향후 유역 해석을 위한 수치데이터, 수위, 유량자료를 확보하여 HEC-RAS, TELEMAC 1, 2차원 연계 모형을 적용 한다면, 하천 준설, 하천 구조물 설치, 홍수피해 등 전반적인 하천관리 계획에 활용할 수 있을 것이라 판단된다.

  • PDF

Comparison of Water Levels from 1 Dimensional Water Surface Profile Models (1차원 수리모형들을 이용한 수위모의결과 비교연구)

  • Jung, Chul-Hoon;Park, Jong-Yoon;Jung, In-Kyun;Kim, Seong-Joon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.791-795
    • /
    • 2009
  • 치수 계획수립시 홍수위는 홍수량의 산정결과를 수리해석모형에 적용함으로서 계산한다. 본 연구에서는 강우-유출모형으로부터 산정된 홍수량산정결과를 수리해석모형과 연계하여 모의할 수 있는 수리수문통합모형개발의 사전연구로, 수면 곡선해석모형 중 현재 실무에서 가장 많이 이용되고 있는 HEC-RAS 모형과 WSPRO, WSP-2 모형의 정상류해석결과를 비교하였다. 하천정비기본 계획을 참고로 하도단면을 구축하고 고시된 홍수량을 적용하여 수위와 유속을 비교 분석하였다. 대상하도의 적용 결과 HEC-RAS 모형과 WSPRO 모형은 평균표준오차 0.09로 큰 차이를 나타내지 않았지만, WSP-2 모형은 0.90으로 HEC-RAS 모형과의 정확도에서 차이를 나타내는 것으로 분석되었다.

  • PDF

A Study to comparison of 1-D Model on dam break flood analysis (댐 붕괴 홍수류해석을 위한 1차원 모형의 비교 연구)

  • Choi, Byung-Kyu;Kang, Tae-Ho;Jung, Yo-Han;Koh, Jae-Hyoung;Kim, Kang-Mo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.1765-1769
    • /
    • 2008
  • '96년, '98년 임진강 유역과 경기북부 지역 집중호우를 시작으로 '02년 태풍 "루사", '03년 "매미", '04년 "메기" 등의 영향으로 대규모 수공 구조물의 설계빈도를 초과하는 폭우를 동반하여 전국적으로 사상 유례없는 막대한 홍수피해를 발생시켰다. 이러한 과정에서 "연천댐", "장현, 동막저수지" 붕괴 등 댐 붕괴로 인하여 댐 하류지역의 홍수피해가 크게 발생하여 이에 대한 대처계획 수립 필요성 및 이를 위한 댐 붕괴로 인한 홍수류 해석에 대한 연구가 절실히 필요하다. 본 연구에서는 비상대처계획(Emergency Action Plan, EAP)수립 대상 국가시설물 중 하나인 양양양수발전소 하부댐에 대한 댐 붕괴 해석을 실시하였다. DAMBRK를 통하여 댐 지점의 붕괴유출수문곡선을 산정하였으며, 댐 하류하천 수위분석은 1차원 DAMBRK와 HEC-RAS모형을 이용비교 분석하였고 이를 통하여 댐붕괴로 인한 하류하천 홍수류 해석시 HEC-RAS모형의 적용성을 검토하였다. 검토결과 HEC-RAS모형 계산치가 DAMBRK 모형에 의한 결과 보다 과대하게 산정 되었다. 향후 댐 붕괴로 인한 홍수류 해석을 위한 HEC-RAS모형 모의시 주변지형의 홍수터화 등의 기법을 첨가하여 홍수위 분석이 필요한 것으로 사료된다.

  • PDF

Comparison of Roughness Coefficients for 1D and 2D Hydraulic Modeling (1차원 및 2차원 수치모의를 위한 조도계수 비교)

  • Ahn, Jung-Min;Lyu, Si-Wan;Kim, Hyeon-Sik;Park, In-Hyeok;Hwang, Phyil-Sun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.576-580
    • /
    • 2012
  • 하도내 수리구조물 건설과 준설로 인해 발생되는 급격한 수리특성의 변화와 편수위로 야기될 수 있는 제방의 파괴 및 침식을 검토하기 위해서는 다차원 모형의 검토가 필요하다. 본 연구에서는 HEC-RAS로 산정한 조도계수를 다차원 모형에 적용하여 수리거동을 분석하였다. 낙동강 수계에 대해 2003년, 2004년, 2006년 그리고 2007년 태풍 사상에 대해 적용하였으며 HEC-RAS 모형의 조도계수를 0.01부터 0.04까지 0.001씩 증가하여 HEC-RAS 모형에 적용하였고 부정류 흐름모의를 수행하여 RMSE와 NRMSE를 이용해 관측 값과 비교하였다. 공간단위 다차원 모형은 격자크기, 만곡도, 난류 등으로 인한 손실이 추가적으로 반영되기 때문에 선단위 1차원 모형에서 산정된 조도계수를 적용할 경우 실측 관측 수위보다 큰 값이 산정되었다. 따라서, 1차원 수치모형에 의해 산정된 조도계수를 다차원 모형에 그대로 적용할 경우 과대한 수위를 산정할 수 있기 때문에 모형 차원에 따른 별도의 보정을 수행하여 얻어진 조도계수를 적용해야 할 것으로 판단된다.

  • PDF