• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.455-460
• /
• 2019

수소화 처리 촉매공정은 정유공정에서 다양한 유분 내 황, 질소, 산소 및 미량 금속성분들의 헤테로 원자를 제거함과 동시에 불포화 탄화수소의 포화를 목적으로 진행되는 수소화공정이다. 대부분의 정유 공정은 납사, 중간유분, 가스오일을 포함하여 중질 잔사유의 업그레이드용 수소화 처리 공정을 포함하고 있다. 언급된 유종 중, 잔사유의 수소화 처리 촉매공정은 원료자체의 복잡성으로 인해 정유공정의 핵심으로 받아들여지고 있는 만큼 기타 유종에 대한 업그레이드 공정 대비 상당히 비중 있게 다루어 지고 있는 실정이다. 따라서, 본 총설은 수소화 처리에 의한 잔사유의 업그레이드 공정 중, 중요한 이슈의 최근 동향을 수첨탈금속 (Hydrodemetallization, HDM) 및 수첨탈황(Hydrodesulfurization, HDS) 공정에 대해 화학적 관점으로 고찰하고자 한다. 더불어, 수소화 처리용 촉매의 기능과 조성은 물론, 개선방향도 살펴보았다.

• 혜화의학회지
• /
• 제15권2호
• /
• pp.121-134
• /
• 2006

This study saw the anti-allergy effect by the immunity regulation action of Yanghyelyoonbotang (YHYBT) consists 12 kinds of herbal medicine agents. Consequently, YHYBT controlled the amount of secretion of various infla- mmatory cytokines, chemokine, monocyte chemotactic protein and histamine from cells (HMC-1, THP-1, EoL-1) stimulated by PMA, A23187 or HDM. 1. YHYBT did not show cytotoxicity on cultured human fibroblast cells under 250 ${\mu}g/m\ell$ concentration. 2. YHYBT suppressed IL-8, TNF-$\alpha$, IL-6 mRNA expression in the HMC-1 cell stimulated with PMA and A23187. 3. YHYBT significantly suppressed IL-6 release in the THP-1 and EoL-1 cell stimulated with HDM. 4. YHYBT significantly suppressed histamine release in the HMC-1 cell stimulated with PMA and A23187 in a dose-dependent. 5. YHYBT significantly suppressed $\beta$-Hexosaminidase release in the HMC-1 cell stimulated with A23187 in a dose-dependent. 6. YHYBT suppressed NF-$\kappa$B gene expression in the RBL-2H3 cell stimulated with PMA in a dose-dependent. These results suggested that YHYBT has suppressive effects on allergic reaction and pro-inflammatory cytokines in various cell lines through the regulation of immune system. YHYBT has potential to use as an antiallergic agents.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.97-105
• /
• 2004

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers and the centrifugal force by rotation of table. It demands $4{\times}10^7$ expense of life but has $4{\times}10^6~-8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller The repair expense fur it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner of vertical roller mill using HDM and fatigue analysis

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.163-169
• /
• 2003

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers load and the centrifugal force by rotation of table. It demands $4{\times}10^7$ cycle but has $4{\times}10^6{\sim}8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller. The repair expense for it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner for vertical roller mill using HDM and fatigue analysis

• The Korean Journal of Physiology and Pharmacology
• /
• 제4권6호
• /
• pp.497-506
• /
• 2000

In this work, GLUTs phosphorylations by a downstream effector of PI3-kinase, $PKC-{\zeta},$ were studied, and GLUT4 phosphorylation was compared with GLUT2 phosphorylation in relation to the translocation mechanism. Prior to phosphorylation experiment, $PKC-{\zeta}$ kinase activity was determined as $20.76{\pm}4.09$ pmoles Pi/min/25 ng enzymes. GLUT4 was phosphorylated by $PKC-{\zeta}$ and the phosphorylation was increased on the vesicles immunoadsorpted from LDM and on GLUT4 immunoprecipitated from GLUT4- contianing vesicles of adipocytes treated with insulin. However, GLUT2 in hepatocytes was neither phosphorylated by $PKC-{\zeta}$ nor changed in response to insulin treatment. It was confirmed by measuring the subcellular distribution of GLUT2 based on GLUT2 immunoblot density among the four membrane fractions before and after insulin treatment. Total GLUT2 distributions at PM, LYSO, HDM and LDM were $37.7{\pm}12.0%,\;42.4{\pm}12.1%,\;19.2{\pm}5.0%\;and\;0.7{\pm}1.2%$ in the absence of insulin. Total GLUT2 distribution in the presence of insulin was almost same as that in the absence of insulin. Present data with previous findings suggest that GLUT4 translocation may be attributed to GLUT4 phosphorylation by $PKC-{\zeta}$ but GLUT2 does not translocate because GLUT2 is not phosphorylated by the kinase. Therefore, GLUT phosphorylation may be required in GLUT translocation mechanism.

• Journal of Welding and Joining
• /
• 제8권4호
• /
• pp.76-82
• /
• 1990

Lots of research works have been done to improve the accuracy of the hole drilling method to measure residual stress by many investigators. In this study, first, size effect of specimen was analyzed based on the solution of hole in a strip under tension. If the ratio of hole diameter tothe strip width is less than 0.2, the stress distribution around hold may be given from the solution of hole in an infinite plate. Second, the residual stress above $0.6{\sigma}_y$(yield stress) may be measured less than the actual stress by 10-15 percent. Third, eccentricity of hole relative to the rosette center effects on the accuracy of residual stress measurements by 10 percent. The error due to eccentricity of hole can be corrected by the iteration method or the direct method.

• International Journal of Korean Welding Society
• /
• 제4권1호
• /
• pp.10-14
• /
• 2004

In this paper, a study on the residual stress of plate with longitudinal stiffeners is explained in terms of the welding sequences. In order to verify the results of numerical analysis, the hole drilling method (HDM) is performed, to measuring the residual stresses of the test plates in $CO_2$ Flux Cored Arc Welding (FCAW) under various welding conditions. The non-linear transient analysis technique for the numerical analysis in a large and complicate structure is considered. The residual stress of plate in consideration of the welding sequences and directions is evaluated by some numerical simulations and also by experiments. Comparison of numerical analysis results with experimental data shows the accuracy and validity of the proposed method.

• 한국도로학회논문집
• /
• 제4권4호
• /
• pp.1-12
• /
• 2002

포장유지관리체계는 신설포장의 공용 이후 포장 유지보수를 실시함에 있어 기술적으로 타당하고 경제적으로 효율적인 보수전락을 적용하는 것을 목표로 한다. 이를 위해서는 신뢰성 있는 포장공용성 예측모델을 필요로 한다. 본 연구에서는 마르코프 체인 이론에 기초한 확률적 포장공용성 예측 시스템을 제안하고, 아스팔트 포장으로의 적용상 문제점 등을 기술하였다. 본 연구 결과로서 아스팔트 포장의 공용성 예측을 위한 포장상태 전이행렬을 정의하였으며, 정량적인 포장공용 수명평가 결과를 제시하였다.

• Environmental Analysis Health and Toxicology
• /
• 제30권
• /
• pp.8.1-8.8
• /
• 2015

Objectives Bedding in childcare centers (CCCs) can hold house dust mite (HDM) allergens. This study examined whether HDM allergen levels can be reduced through the distribution of an educational newsletter on bedding control to parents of CCC children in Korea. Methods All 38 CCCs were measured for Der 1 (sum of Der f 1 and Der p 1) concentrations on classroom floors and bedding before the intervention. Educational newsletters on children's bedding control were sent to 21 CCCs by mail, and teachers were asked to distribute the newsletters to the parents of the children (intervention group). The remaining 17 CCCs were not sent newsletters (control group). The measurement of Der 1 concentrations in 38 CCCs was repeated after the intervention. Dust samples were collected with a vacuum cleaner and analyzed using enzyme-linked immunosorbent assay methods. Results The Der 1 concentrations on the bedding were significantly higher than those on the floors in 38 CCCs at baseline (p < 0.05). Although changes of the Der 1 concentrations for the control group (n=17) were not significant, Der 1 concentrations for the intervention group (n=21) decreased significantly from 2077.9 ng/g dust to 963.5 ng/g dust on the floors and from 3683.9 ng/g dust to 610.4 ng/g dust on bedding (p < 0.05). Conclusions The distribution of educational newsletters on bedding control to parents may be an effective means of controlling HDMs in CCCs.

• Tuberculosis and Respiratory Diseases
• /
• 제47권6호
• /
• pp.817-823
• /
• 1999

연구배경: 전북지역은 최근에 도시화와 공업화가 이루어 진 곳으로서 생활환경 변화에 따라 알레르기 환자에서 원인 알레르겐의 종류나 감작률에 있어서도 변화가 있으리라 여겨진다. 방 법: 1984년 2월부터 1985년 2월 사이와 1997년 2월부터 1998년 2월 사이에 전북대 병원 알레르기 내과를 방문한 알레르기 환자 201명과 339명을 대상으로 피부단자시험과 RAST를 실시하여 원인 알레르겐의 변화 추세를 비교 분석하여 보았다. 결 과: 한가지 이상의 항원에 양성을 보인 환자는 전체 대상 환자중 149명(74.2%)과 257명(75.8%)으로 유의한 차이는 없었다(p=0.664). 항원의 종류에 따른 감작률의 비교에서 1) 꽃가루군에 대해서는 차이가 없었다(35.8% vs 30.1 %, p=0.17). 2) 집먼지 진드기군에 대한 감작률의 감소가 있었다(66.1% vs 56.3%, p=0.02). 3) 곰팡이군, 동물털 및 비듬군에 대한 감작률은 감소하였다(p<0.001). 결 론: 위생상태의 개선에 따라 이와 관련있는 알레르겐의 감작률이 감소됨을 알 수 있었는데, 이에 대한 더욱 넓은 지역에서의 연구가 필요하리라 사료된다.