The Pap smear test is recommended for early diagnosis of cervical cancer. The aim of this study was to assess knowledge and behavior regarding the Pap smear test based on the Health Belief Model (HBM) in women referred to premarital counseling classes, Hamadan, Iran. This quasi-experimental study was conducted on 330 women, who were allocated randomly to two case and control groups (n=165). Two educational session classes were performed in the case group. Two stages in before and after intervention groups were evaluated. Analysis of data was performed by SPSS/16.0, using t-test, $x^2$, and McNemar's test. P-values <0.05 were regarded as significant. There was no significant difference between the mean scores of the various structures of this model in two groups before the intervention. However, after the intervention there were significant increase in mean score of knowledge and all variables of HBM in the intervention group(P<0.001). The findings of this study highlight the important role of education about cervical cancer on changing women's beliefs about cervical screening.
The Journal of Korea Institute of Information, Electronics, and Communication Technology
/
v.12
no.2
/
pp.150-154
/
2019
In the design of semiconductor integrated circuits, ESD is one of the important issues related to product quality improvement and reliability. In particular, as the process progresses and the thickness of the gate oxide film decreases, ESD is recognized as an important problem of integrated circuit design. Many ESD protection circuits have been studied to solve such ESD problems. In addition, the proposed device can modify the existing SCR structure without adding external circuit to effectively protect the gate oxide of the internal circuit by low trigger voltage, and prevent the undesired latch-up phenomenon in the steady state with high holding voltage. In this paper, SCR-based novel ESD(Electro-Static Discharge) device with the high holding voltage has been proposed. The proposed device has the lower triggering voltage without an external trigger circuitry and the high holding voltage to prevent latch-up phenomenon during the normal condition. Using TCAD simulation results, not only the design factors that influence the holding voltage, but also comparison of conventional ESD protection device(ggNMOS, SCR), are explained. The proposed device was fabricated using 0.35um BCD process and was measured electrical characteristic and robustness. In the result, the proposed device has triggering voltage of 13.1V and holding voltage of 11.4V and HBM 5kV, MM 250V ESD robustness.
In this paper, a new ESD protection circuit is proposed to improve the snapback characteristics. The proposed a new structure ESD protection circuit applying the conventional SCR structural change and stack structure. The electrical characteristics of the structure using penta-well and double trigger were analyzed, and the trigger voltage and holding voltage were improved by applying the stack structure. The electron current and total current flow were analyzed through the TCAD simulation. The characteristics of the latch-up immunity and excellent snapback characteristics were confirmed. The electrical characteristics of the proposed ESD protection circuit were analyzed through HBM modeling after forming a structure through TCAD simulator.
Smart healthcare, combining ICT (Information and Communications Technologies) and medical technologies, has been rapidly emerging. Accordingly, its market has also increased as interest in disease prevention, management, and diagnosis grows due to the COVID-19 pandemic. In particular, using mobile devices to support medical activities, mobile healthcare has been attracting attention as a leading service in the smart healthcare market. However, the intention to use mobile healthcare apps may vary depending on individual beliefs and attitudes. Many studies on the intention to use mobile healthcare apps have used the TAM (Technology Acceptance Model), but there is a lack of studies that have been verified from the perspective of users' health beliefs. This study aims to identify the factors that affect the intention to use mobile healthcare apps based on the HBM (Health Belief Model). Furthermore, it investigates how this influencing mechanism fluctuates based on the user's mHealth literacy, the ability to find and understand health information through mobile. This study contributes to the empirical examination of the intention to use mobile healthcare apps through the HBM. It also offers insights for app providers and public health officials to increase the use of mobile healthcare apps.
This paper propose a new ESD protection device suitable for 12V class applications by adding a self-biasing structure to an ESD protection device with high holding voltage due to additional parasitic bipolar BJT. To verify the operating principle and electrical characteristics of the proposed device, current density simulation and HBM simulation were performed using Synopsys' TCAD Simulation, and the operation of the additional self-biasing structure was confirmed. As a result of the simulation, it was confirmed that the proposed ESD protection device has a higher level of holding voltage compared to the existing ESD protection device. It is expected to have high area efficiency due to the dual structure and sufficient latch-up immunity in 12V-class applications.
Background: Japanese women in their 40s or older have been encouraged to attend breast cancer screening. However, the breast cancer screening rate in Japan is not as high as in Europe and the United States. The aim of this study was to identify psychological and personal characteristics of women concerning their participation in breast cancer screening using the Health Belief Model (HBM). In addition, the attributes of screening more easily accepted by participants were analyzed by conjoint analysis. Materials and Methods: In this cross sectional study of 3,200 age 20-69 women, data were collected by an anonymous questionnaire. Questions were based on HBM and personal characteristics, and included attitudes on hypothetical screening attributes. Data of women aged 40-69 were analyzed by logistic regression and conjoint analysis to clarify the factors affecting their participation in breast cancer screening. Results: Among responses collected from 1,280 women of age 20-69, the replies of 993 women of age 40-69 were used in the analysis. Regarding the psychological characteristics based on HBM, the odds ratios were significantly higher in "importance of cancer screening" (95%CI: 1.21-2.47) and "benefits of cancer screening" (95%CI: 1.09-2.49), whereas the odds ratio was significantly lower in "barriers to participation before cancer screening" (95%CI: 0.27-0.51). Conjoint analysis revealed that the respondents, overall, preferred screening to be low cost and by female staff members. Furthermore, it was also clarified that attributes of screening dominant in decision-making were influenced by the employment status and the type of medical insurance of the women. Conclusions: In order to increase participation in breast cancer screening, it is necessary to disseminate accurate knowledge on cancer screening and to reduce barriers to participation. In addition, the attributes of screening more easily accepted were inexpensive, provided by female staff, executed in a hospital and finished in a short time.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2018.06a
/
pp.102-102
/
2018
Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).
Mohd Fazeli Sazali;Syed Sharizman Syed Abdul Rahim;Ahmad Hazim Mohammad;Fairrul Kadir;Alvin Oliver Payus;Richard Avoi;Mohammad Saffree Jeffree;Azizan Omar;Mohd Yusof Ibrahim;Azman Atil;Nooralisa Mohd Tuah;Rahmat Dapari;Meryl Grace Lansing;Ahmad Asyraf Abdul Rahim;Zahir Izuan Azhar
Tuberculosis and Respiratory Diseases
/
v.86
no.2
/
pp.82-93
/
2023
Tuberculosis (TB) is a significant public health concern. Globally, TB is among the top 10 and the leading cause of death due to a single infectious agent. Providing standard anti-TB therapy for at least 6 months is recommended as one of the crucial strategies to control the TB epidemic. However, the long duration of TB treatment raised the issue of non-adherence. Non-adherence to TB therapy could negatively affect clinical and public health outcomes. Thus, directly observed therapy (DOT) has been introduced as a standard strategy to improve anti-TB medication adherence. Nonetheless, the DOT approach has been criticized due to inconvenience, stigma, reduced economic productivity, and reduced quality of life, which ultimately could complicate adherence issues. Apart from that, its effectiveness in improving anti-TB adherence is debatable. Therefore, digital technology could be an essential tool to enhance the implementation of DOT. Incorporating the health belief model (HBM) into digital technology can further increase its effectiveness in changing behavior and improving medication adherence. This article aimed to review the latest evidence regarding TB medication non-adherence, its associated factors, DOT's efficacy and its alternatives, and the use of digital technology and HBM in improving medication adherence. This paper used the narrative review methodology to analyze related articles to address the study objectives. Conventional DOT has several disadvantages in TB management. Integrating HBM in digital technology development is potentially effective in improving medication adherence. Digital technology provides an opportunity to improve medication adherence to overcome various issues related to DOT implementation.
Journal of the Korean Society for information Management
/
v.41
no.1
/
pp.389-409
/
2024
The purpose of this study is to identify the factors affecting female college students' behaviors in seeking reproductive health information on the Internet and to explore the relationships among these factors. Based on the Health Belief Model(HBM) and the Theory of Planned Behavior(TPB), perceived sensitivity, perceived severity, perceived benefit, perceived barriers, subjective norms, perceived behavioral control, and affective evaluation were defined as key factors, and the study was designed accordingly. An online survey was distributed to female college students in Seoul through the university student's online community, 'Everytime.' The results showed that the intention of female college students to seek reproductive health information via the Internet was associated with higher perceived sensitivity, perceived benefit, and subjective norms, and lower perceived barriers. There were statistically significant differences between groups in terms of sexual experiences, experience with reproductive system disorders, and the level of health interest. We believe that this research outcome will contribute to assessing the level of awareness regarding reproductive health among female college students, thereby aiding in the development of online health information literacy education or related service programs by university libraries, health institutions, and similar entities targeting female college students.
Journal of the Korean Institute of Telematics and Electronics A
/
v.30A
no.12
/
pp.88-97
/
1993
Electrostatic Discharge(ESD) is one of the major reliability, issues for today's VLSI production. Since the gate oxide with a thickness of 100~300$\AA$ is vulnerable to several thousand volt of ESD surge, it is necessary to control the ESD events and design an efficient protection circuit. In this paper, physical mechanism of the catastrophic ESD damage is investigated by transient analysis based upon Human Body Model(HBM). Using two-dimensional electrothermal simulator, we study the failure mechanism of the output protection devices by ESD and discuss the design issues for the optimun protection network.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.