Journal of Korean Society of Industrial and Systems Engineering
/
v.39
no.2
/
pp.11-18
/
2016
Product liability (PL), which began enforcement in 2002, refers to the legal responsibility of the manufacturers or sellers (wholesales or retailers) for the property damage or bodily harm caused by their product. With a strong enforcement of the Product Liability (PL) Act, companies are required to structure and operate a response system to defend or prevent product accidents efficiently, but small and medium enterprises (SMEs) are unable to respond more aggressively due to limitation of management resources. In this manner, it is important to develop response strategies for SMEs to efficiently cope with the PL Act. In this paper, the PEST (Political, Economic, Social, and Technological) analysis is performed to reveal the impact of the PL Act on SMEs in macro-economic point of view. To formulate SME's PL response strategy, SWOT analysis is performed to categorize each factors from PEST analysis and AHP is applied to identify the intensities of SWOT factors. The prioritized SWOT factor, results of PEST-SWOT-AHP analysis, are used to formulate SME's PL response strategies. The study results are briefly summarized as follows. To reduce product defects, it is necessary for SMEs to formulate PL response strategies for each phase of the product life cycle by continuously collecting and analyzing PL cases in the same industry or for similar products. In addition, SMEs should invest more technological effort to ensure product safety. Further, SMEs should spread PL awareness to all staff members by training internal PL experts. Moreover, a SME should enroll in PL insurance and spread this information to its customers so that they become aware that the company is proactively conforming to the PL law.
This study was intended to test the feasibility of genetic analysis of wintering population of geese using their feces samples. This noninvasive approach is quite significant and effective because we do not need to capture or harm geese to obtain the samples. We collected the feces from two different populations of wintering geese in Korea in 2007. Finally thirty two feces were analyzed through a molecular genetic method. As a result, 14 haplotypes were identified and classified into two groups, white-fronted geese (Anser albifrons) and bean geese (Anser fabalis). We established the method to make molecular genetic experiment more efficient using the feces. This study has a significance as the first genetic result on wintering population of geese in Korea using noninvasive sampling method.
Korean peninsula has the most mountainous areas such as mountains and hilly country, and it is surrounded by the sea on all sides but one. In this respect, a large scaled construction works have frequently been conducted. However, it is not easy to porform a large scale blasting work without giving any harm to houses or facilities nationwide. Therefore, blasting work becomes more closely related to maintenance thing due to the development of the downtown or a large structure for key facilities. Many researches on blast in the open space and tunnel blasting have been conducted. On the contrary, research on underwater blasting operations is comparatively scanty even though much more necessity of marine development is required. In this respect, this study aims to investigate the characteristics of underwater blasting operations and to make a comparative study with blast in the open space. As a result of examining into the characteristics during underwater blasting operations, the around oscillation in case of underwater blasting operations shows significantly low compared to that in case of blast in the open space, and this means that much more cautious altitude must be taken in designing underwater blasting operations compared to the design of blast In the open space. As a result of analysis on the difference between a square root and a cube root In the equation of estimating oscillations in the actual site, it is shown that it is shown to apply a square root for the estimation of oscillation at 60 meters in case of underwater blasting operations and at 22 meters case of general blast in the open space.
Objectives: The purpose of this study is to evaluate the personality traits and cognitive characteristics of the Sasang constitution by comparing the Eysenck Personality Questionnaire (EPQ), Temperament and Character Inventory (TCI), Continuous Performance Test (CPT) and Stroop Test. Methods: One hundred and six healthy subjects (age 20 to 40) were analyzed; 45 Taeeumin, 30 Soyangin and 31 Soeumin. The Sasang constitution was diagnosed by a sasang constitutional medicine specialist based on the results of a Two Step Questionnaire for Sasang Constitution Diagnosis (TS-QSCD), the external appearance, temperament and symptoms. The results of the EPQ, TCI, CPT and Stroop Test were compared between Sasang constitutions. Results: Among the seven dimensions of EPQ, Taeeumin and Soyangin scored significantly higher than Soeumin in Extraversion. Soyangin scored significantly higher than Soeumin in Impulsiveness. Among the four temperament dimensions of TCI, Taeeumin and Soyangin scored significantly higher than Soeumin in novelty seeking, reward dependence and persistence. Soeumin scored significantly higher than Taeeumin and Soyangin in harm avoidance. Among the three character dimensions of TCI, Soyangin scored significantly higher than Taeeumin in self transcendence. The results for CPT showed no significant differences between sasang constitutions. Taeeumin had a significantly higher color score in the stroop test than Soeumin. Conclusions: The personality tests showed significant differences between Sasang constitutions, but the neuropsychological test did not show any differences. Further studies should be performed to identify neuropsychological differences between Sasang constitutions.
Tract-Based Spatial Statics (TBSS) after obtaining the image by examining a diffusion tensor image that can determine the presence or absence of damage to the cerebral white matter and gray matter for middle-aged men aged 30 to 50 with the starting age of drinking as a variable. As a result of measuring and analyzing the FA (fractional anisotropy) value of the brain gray matter region to the hippocampal region nerve fibers, the lower the alcohol start age in all regions, the lower the anisotropy measurement value, but the FA value was statistically significant. The study results indicated by the FA results measured in this study are that the earlier the drinking start age, the more severe the morphological changes in all neurological and anatomical brain regions in the hippocampal region of the brain gray matter and seriously affect the nerve fiber tissue. It can be said to harm and damage nerve fibers and affect functional morphological variations associated with alcohol.
Journal of the Korean Society for Precision Engineering
/
v.19
no.3
/
pp.88-94
/
2002
Recently, the life cycle and the lead-time of a product are to be shortened in order to satisfy consumer's demand. It is thus important to reduce the time and cost in manufacturing trial products. Several technique have been developed and successfully commercialized in the market of RPM(Rapid Prototyping and Manufacturing). However, most commercial systems currently use resins or waxes as the raw materials. So, the limited mechanical strength for functional testing is regarded as an obstacle towards broader application of rapid prototyping techniques. To overcome these problems, high-speed machining technology is being investigated worldwide for rapid manufacturing and even for direct rapid tooling application. In this paper, some fundamental experiments and analyses are carried out to obtain the filling time, materials, method, and process parameters for HisRP(High-Speed RP) process. HisRP is a new RP process that is combined high-speed machining with automatic filling. In filling process, Bi58-Sn alloy is chosen as filling material because of the properties of low-melting point, low coefficient of thermal expansion and no harm to environment. Also the use of filling wire it if advantage since it needs simple and flexible mechanism. Then the rapid product, for example a skull, is manufactured for aluminum material by HisRP process with an automatic set-up device thor 4-faces machining.
The purpose of Emergency Arbitrator System is to provide parties with the possibility of obtaining interim measures before constitution of the arbitral tribunal. This paper examines the Emergency Arbitrator System set forth in Article 32 and Appendix II of Arbitration Rules of Stockholm Chamber of Commerce (SCC) in comparison with Article 37 of ICDR International Arbitration Rules. This paper also provides a case study of 4 Decisions rendered by Emergency Arbitrators under the auspices of SCC in 2010. It was found that it took only 4 days on average from the date upon which the request for emergency interim measures was registered to SCC to the decision rendered by Emergency Arbitrators. The figures of average days reflect its rapidity well, one of the most preferred characteristics of arbitration. However, a case study of SCC decisions shows that only one request for interim measures was successfully granted. In other words, it was found that the requirements for granting of interim measures by emergency arbitrator were quite strictly applied. If interim measures is to be granted, it was found that the requesting party should prove to satisfy the requirements for granting of interim measures as follows: First, the requesting party has to demonstrate that it may suffer irreparable or serious harm in commercially-sensible, not in a strictly literal sense unless the interim measure is granted. Second, the party requesting interim measures has to persuade the Emergency Arbitrator that the request was of an urgent nature. Third, the requesting party is required to meet the reasonable possibility that it may succeed on the merits of the claim.
Background: The popularity of the narghile waterpipe, also referred to as hookah, shisha or hubble-bubble has increased tremendously during the past few decades. The aim of this study was to expose perception of narghile among a representative sample of university students in Sakarya University campus. Materials and Methods: Written approval was taken from the local education authority. An anonymous questionnaire which was prepared by the investigators and contained 17 questions was administered. Nine of the questions were related to socio-demographic characteristics and eight were related to the students harm perceptions about waterpipe. A total of 1,320 questionnaries were received and after preliminary evaluation 1,255 (95.7%) were found to be suitable for evaluation. The data was evaluated in SPSS program by using percentages and averages. Results: The $mean{\pm}SD$ age of the students was $20.8{\pm}2.29$ years (min 18, max 32). There were 864 (68.8%) females and 391 (31.2%) males. A total of 6.3 % of the students (n=79) believed that waterpipe is not harmful because its smoke does not burn the lungs. Almost one-third (n=318) think that the carcinogenic chemicals are filtered while waterpipe smoke passes from the water; 12.1 % of the students (n=152) checked "true" for the statement of "waterpipe smoke contains no nicotine". It is seen that 14.0 % of the students (n=176) think waterpipe with fruit/aroma is healthier than plain waterpipe. Conclusions: As a result of this study, it is found out that a substantial number of university students have false beliefs on harmful effects of waterpipe smoking.
In the recent years, environmentally conscious design and manufacturing technologies have attracted considerable attention. The coolants, lubricants, solvents, metallic chips and discarded tools from manufacturing operations will harm our environment and the earth's ecosystem. In the present work, the Tukey method of multiple comparisons is used to select the minimum level of coolant required in a turning process. The amount of coolant is varied in 270 designed experiments and the parameters cutting temperature, surface roughness, and specific cutting energy are carefully evaluated. The effects of coolant mix ratio as well as the amount of coolant on the turning process are studied in the present work. The cutting temperature and surface roughness for different quantity of coolant are investigated by analysis of variance (ANOVA) - test and a multiple comparison method. ANOVA-test results signify that the average tool temperature and surface roughness depend on the amount of coolant. Based on Tukey's Honestly Significant Difference (HSD) method, one of the multiple comparison methods, the minimum level of coolant is 1.0 L/min with 2% mix ratio in the aspect of controlling tool temperature. F-test concludes that the amount of coolant used does not have any significant effect on specific cutting energy. Finally, Tukey method ascertains that 0.5 L/min with 6% mix ratio is the minimum level of coolant required in turning process without any serious degradation of the surface finish. Considering all aspects of cutting, the minimum coolant required is 1.0 L/min with 6% mix ratio. It is merely half the coolant currently used i.e. 2.0 L/min with 10% mix ratio. Minimal use of coolant not only economically desirable for reducing manufacturing cost but also it imparts fewer hazards to human health. Also, sparing use of coolant will eventually transform the turning process into a more environment-conscious manufacturing process.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.27
no.3
/
pp.204-208
/
2001
The purpose of this study is to examine the change of enzymeimmuno-assay for $prostaglandinE_2$ in the synovial fluid lavage specimen of patients with mandibular fracture patients without condylar fracture. For this study, fourteen patients (eight males, six females) with mandibular fractures without condylar fracture was investigated to analyse the synovial fluid from upper temporomandibular joint cavities. Synovial fluid was collected from TMJ cavities of mandibular fracture patients before open reduction and after one week of open reduction, and then stored in liquid nitrogen tank after centrifuge. Two synovial fluid lavage samples of TMJs of 2 asymptomatic served as normal controls referred from other data. The concentrations of $PGE_2$ were measured by use of $PGE_2$ EIA System ($Amersham^{(R)}$). The following results were obtained: 1) In nine patients, the concentrations of $PGE_2$ are lower after open reduction than before. 2) In three patients, the concentrations of $PGE_2$ are higher after open reduction than before. 3) There was no statistical significant between the preoperative group and postoperative 7 days (p>0.05), but there was some difference between the two groups. In conclusion, the results suggest that $PGE_2$ probably does not play as important role in the harm of TMJ.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.