• Composites Research
• /
• v.35 no.4
• /
• pp.248-254
• /
• 2022

In this study, TiB₂-steel composite with high-fractional TiB₂ reinforcement was fabricated by gas pressure infiltration process and the microstructure analysis and compressive strength and hardness were evaluated. To elucidate the correlation between microstructure and mechanical properties for fabricated composite, after the compression test of TiB₂-steel composite, the fracture surface was analyzed and the fracture behavior on compression test was predicted. As a result of the compression fracture surface analysis, interfacial failure trace between the steel matrix and the reinforcement was observed, and the interface between the steel matrix and the reinforcement was analyzed using TEM. From the result of microstructure analysis on the fabricated composite, it was confirmed that, in addition to TiB₂ reinforcement and steel matrix, TiC phase and coarse (Fe,M)₂B (M=Cr,Mn) phase were formed. Throughout the thermodynamic calculation, it was confirmed that TiC and (Fe,M)₂B can be formed as a stable phase under the process condition. The fabricated TiB₂-steel composite had a significantly increased hardness, and the compressive strength and Young's modulus were improved by 3.07 times and 1.95 times, respectively, compared to steel matrix. It seems that the coarse (Fe,M)₂B (M=Cr,Mn) phase formed throughout the composite causes the deterioration of mechanical properties, and by controlling the formation of the (Fe,M)₂B (M=Cr,Mn) phase, it is judged that the mechanical properties of the TiB₂-steel composite can be further improved.

• The Korean Journal of Archival Studies
• /
• no.73
• /
• pp.161-188
• /
• 2022

This article explores the current status of arrangement of the archives relating to the Korean Provisional Assembly held by the National Assembly Library and suggests the direction of rearrangement focusing on the principles of arrangement. The Korean Provisional Assembly had records management regulations, and records were produced and stored according to them. However, the archives lost their original order at some point. The National Assembly Library collected and managed them in the 1960s. The National Assembly Library did not fully consider the records management system at the time of record production and various situations that may occur during the storage process while organizing the collected archives. At that time, the National Assembly Library did not follow the records management regulations of the Korean Provisional Assembly. In addition, the hierarchical structure of archives was not applied during the arrangement, and the National Assembly Library arranged without considering the Principal of Provenance and the Principle of original order. As a result, it became difficult to understand the structure and context of the archives. In order to solve these problems and come up with a plan for rearranging the archives, first of all, it is necessary to examine the characteristics of the records related to the Korean Provisional Assembly in accordance with the principles of record arrangement. First, according to the Principal of Provenance, it is necessary to identify the organization, function, and records and classify the records item, records file, creators, dates of creation, types of records etc. Second, by applying the Principle of original order, it is necessary to understand what the order of records was at the time when records were created and preserved. Third, it is necessary to examine whether the records are completely created and valid. It is impossible to completely arrange the archives related to the Korean Provisional Assembly as it was in the past. However, by examining the current state of arrangement and the direction of rearrangement, it will be possible to newly understand the contents, structure, and context of the archives and create a basis for effective reference service.

• Journal of Korea Port Economic Association
• /
• v.38 no.2
• /
• pp.81-93
• /
• 2022

Since 2008, China's shipping industry has been in a slump, with shipbuilding orders falling sharply, and high-growth excess capacity has become increasingly apparent, leaving many firms with sharply reduced orders at risk of bankruptcy and shutdown. To ensure the development of the shipbuilding industry and enhance the international competitiveness of the shipbuilding industry, it is necessary to analyze the present situation of the shipbuilding industry and the financial situation of the shipbuilding enterprises. And analyzing the problems faced by enterprises from the perspective of capital structure is very meaningful to the shipbuilders with high capital operation. We are trying to analyze the determinants of capital structure of China's shipbuilding listed companies. 30 listed Chinese shipbuilding and listed companies have been designated as sample companies that can obtain financial statements for 13 consecutive years. They also divided 30 sample companies into shipbuilding, shipbuilding-related manufacturing, and shipbuilding-related transportation. Dependent variable is the debt level of the year, independent variable includes the debt level of the previous year, fixed asset ratio, profitability ratio, depreciation cost ratio and asset size. The regression model of the panel used to analyze determinants is capital structure. The results of the empirical analysis are as follows. First, a fixed-effect model for the entire entity showed that the debt-to-equity ratio and the size of the asset in the previous period had a positive effect on the debt-to-equity ratio in the current period. Second, the impact of the profitability ratio on the debt level in the prior term also supports the capital procurement ranking theory rather than the static counter-conflict theory. Third, it was shown that the ratio of the depreciation of the prior term, which replaces the non-liability tax effect, affects the debt-to-equity ratio in the current period.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.4
• /
• pp.437-448
• /
• 2021

The purpose of this study is to analyze morphological characteristics of maxillary primary molar's root and root canal. 268 children aged 3 - 7 years (175 boys, 93 girls) who had CBCT (152 children) and 3D CT (116 children) taken in Seoul National University Dental Hospital from January 2006 to April 2020 were included. The number of roots and root canals were analyzed in 1002 teeth without any root resorption or periapical pathologies. Curvature, angulation, length of root and root canal, as well as cross-sectional shapes of the root canal were analyzed in 218 teeth. By using Mimics and 3-Matics software, volume, surface area, and volume ratio of root canal was analyzed in 48 teeth. More than half of maxillary primary molars have 3 roots and 3 root canals. The degree of symmetry of root canal type was about 0.63 (Cohen's kappa coefficient). The most frequent shape of roots and canals was linear in 1^st primary molars and curved in 2^nd primary molars. Angulation, length of root and root canals was the largest on palatal roots. Most teeth showed ovoid or round shapes at apex. The largest root canal volume, surface area, volume ratio was found in the palatal roots.

• Pediatric Infection and Vaccine
• /
• v.28 no.3
• /
• pp.133-143
• /
• 2021

Purpose: This study aimed to determine the incidence of central line-associated bloodstream infection (CLABSI) in the neonatal intensive care unit (NICU), evaluate the patients' clinical characteristics, and identify the etiologic agents for guidance in prevention and treatment. Methods: A retrospective chart review study of infants classified as having CLABSI was conducted at the NICU of Seoul National University Bundang Hospital from January 2016 to December 2020. Results: Of the 45 infants, 53 had CLABSIs within a follow-up period of 18,622 catheter days. The incidence of CLABSIs was 2.85 per 1,000 catheter days. The most common catheter type was a peripherally inserted central catheter (n=47, 81%). A total of 57 pathogens were isolated, of which 57.9% (n=33) were Gram-positive bacteria, 36.8% (n=21) were Gram-negative bacteria, and 5.3% (n=3) were Candida spp. The most common pathogens were Staphylococcus aureus (n=12, 21%) and coagulase-negative staphylococci (n=12, 21%), followed by Klebsiella aerogenes (n=8, 14%). The median duration of bacteremia was 2 days, and 19 episodes showed bacteremia for 3 days or more. The mortality rate of infants within 14 days of CLABSI was 13.3% (n=6). Conclusions: This study analyzed the incidence of CLABSI and the distribution of pathogens in the NICU. Continuous monitoring of CLABSI based on active surveillance serves as guidance for empiric antibiotic use and also serves as a tool to assess the necessity for implementation of prevention strategies and their impact.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.221-227
• /
• 2022

In accordance with Article 6 of the 「Insect Industry Promotion and Support Act」, the National Institute of Agricultural Sciences conducted a fact-finding investigation in the insect industry for related workers in 2020. Most commonly, insect industry workers were involved in production (98.5%), the male ratio was high (80.4%), while those in their 50s comprised 36.4% of the workers. As for the uses of industrial insects, 66.5% was for food and medicine, 12.7% for feed, and 20.7% as pets. The most commonly produced industrial insect species by use were the white-spotted flower chafer (69.6%), Protaetia brevitarsis seulensis (Kolbe), for food and medicine; crickets (31.2%) for feed; and the rhinoceros beetle (45.6%), Allomyrina dichotoma (Linnaeus), as pets. Powder was the most common product form at 68.5%, and live insects constituted 40.9%. Insect farms with an annual income accounted for 77.3%, of which 65.4% had annual sales of less than 20 million won. Market acquisition was rated by most insect industry workers (84.0%) as the primary challenge. In conclusion, although the number of people employed in the insect industry is increasing annually, the number of young insect farmers (20s to 40s) is decreasing. The production of industrial insects was limited to a few species, and more than half of insect farms have very low incomes. Furthermore, insect farms have the greatest difficulty in market acquisition, necessitating the development of utilization technology to promote the consumption of industrial insects.

• Journal of Korean Society of Forest Science
• /
• v.111 no.3
• /
• pp.357-364
• /
• 2022

We investigated the early growth characteristics of Quercus rubra planted in six regions (Hwaseong, Yangpyeong, Pyeongchang, Samcheok, Chungju, and Gimje) in South Korea in relation to soil physicochemical properties and meteorological factors. Q. rubra (1-0) were planted at a density of 3,000 trees ha^-1. The average height, root collar diameter (RCD), and volume of 8-year-old Q. rubra planted in 2014 were 3.52 m, 3.84 cm, and 0.0023 m³, respectively. The growth parameters of Q. rubra were the highest and lowest in Hwaseong and Pyeongchang, respectively. Correlation analysis among the soil physicochemical properties, meteorological factors, and plantation growth characteristics found that pH was the only soil factor negatively correlated with RCD, and the other soil factors were not significantly correlated with the growth characteristics. However, growth characteristics were positively correlated to average temperature from March to October and daily maximum temperature; and they were negatively correlated to altitude, topology, and the number of rainy days from March to October. In particular, the trees planted in Hwaseong area showed the best early growth characteristics because this area had the highest daily maximum temperature, the x average temperature from March to October, the low altitude, and it is located close to the foot of a mountain. In Pyeongchang, the early growth characteristics were negatively affected by winter cold damage because of the high altitude, low daily minimum temperature, and damage by wild animals. In Hwaseong, meteorological factors such as temperature and altitude were more highly correlated to growth characteristics of Q. rubra than the physicochemical soil properties. These results will provide useful information for determining suitable sites for Q. rubra plantations and for predicting early growth characteristics in response to environmental factors.

• Journal of Korean Society of Forest Science
• /
• v.111 no.3
• /
• pp.405-417
• /
• 2022

The purpose of this study was to describe the photosynthetic features of Prunus maximowiczii and Prunus serrulate Lindl. var. pubescens (Makino) Nakai in response to drought stress. Specifically, we studied the effects of drought on photosynthetic ability and photosystem II activity. Drought stress (DS) was induced by cutting the water supply for 30 days. DS decreased the moisture contents in the soil, and between the 10th and 12th days of DS, both species had 10% or less of x., After the 15th day of DS, it was less than 5%, which is a condition for disease to start. We observed a remarkable decrease of maximum photosynthesis rate starting from 10th day of DS; the light compensation point was also remarkable. Dark respiration and net apparent quantum yield decreased significantly on the 15th day of DS, and then increased on the 20th day. In addition, the stomatal transpiration rate of P. maximowiczii decreased significantly on the15th day of DS, and then increased on the 20th day. Water use efficiency increased on the 15th day of DS, and then decreased on the 20th day. The stomatal transpiration rate of P. serrulate decreased significantly on the 20th day of DS, and then increased afterward, while its water use efficiency increased on the 20th day of DS, and then decreased afterward. These results indicate that the closure of stoma prevented water loss, resulting in a temporary increase of water use efficiency. Chlorophyll fluorescence analysis detected remarkable decreases in the functional index (PI_ABS) and energy transfer efficiency in P. maximowiczii after the 15th day of DS. Meanwhile, photosystem II activity decreased in P. serrulate after 20 days of DS. In addition, Ts-Ta, PI_ABS, DI_O/RC, ET_O/RC followed similar trends as those of the soil moisture content and photosynthetic properties, indicating that they can be used as useful variables in predicting DS in trees.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.4
• /
• pp.15-30
• /
• 2021

This study was conducted to investigate the utilization and satisfaction of meal-kits according to food-related lifestyle among total 357 adults who had experience in using meal-kits. This study can provide basic data for effective menu composition and directions toward improvement. The participants of the study were classified into 5 groups 'health-type group', 'economic-type group', 'safety-type group', 'tasty-type group' and 'convenience-type group'. The 'tastye-type group' were found to spend more on purchasing meal-kits than other groups with the higher proportion(36.66%) of spending '30,000-50,000'won(p<0.05), which is the highest price category. The important factors that contributed to purchasing a meal-kits were 'taste'(50.98%), and 'economic-type group' showed the highest tendency of considering taste (58.46%). About half(49.02%) of the respondents preferred 'Korean-food' for meal-kits as for the type of food. All groups highly preferred 'meat'(42.58%) as the main ingredient, particularly the 'tasty-type group'(53.33%)(p<0.001). The 'tasty-type group' showed the highest satisfaction on 'convenience of cooking'(4.05), and 'convenience-type group' showed the lowest satisfaction on the 'origin of ingredient'(2.98) among groups (p<0.01). The overall response indicated that most respondents are willing to use meal-kits in the future (97.20%); and 93.28% of respondents would recommend the purchase of meal-kits to others, where 'convenience of cooking/purchase' was the factor contributing most for recommending(67.23%). Taken together, 'taste' was the most important factor for all groups. And 'Convenience of cooking' was the factor contributing to satisfaction most while 'origin of ingredient' contributing the least. It is recommended for the growth of meal-kits industry, to improve the quality of the meal-kits products and develop various menus.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.197-211
• /
• 2021

In the service industry the types are diversifying and the scale of service companies is greatly improving. Such a phenomenon is caused by economic growth and technological development diversifying consumer needs creating demand for new services maturing the service industry and intensifying competition among companies in the form of global competition. It can be said that this is because it is necessary to improve competitiveness by utilizing the economy of scale. Research is needed on the impact of entrepreneurship on various outcome variables in order for service organization managers to respond quickly to diverse and rapidly changing environments and achieve organizational outcomes and corporate goals of management outcomes. The purpose of this study was to empirically analyze the relationship in which the entrepreneurial spirit of a manager influences the relationship between customer orientation, which is an organizational result, customer satisfaction, and financial result, which is a management result. In order to verify such research, the questionnaire was composed of one business owner questionnaire, two employee questionnaires, and two customer questionnaires. The questionnaire was distributed to a total of 400 companies, and the questionnaires of 340 companies were collected. Of these, 303 companies, excluding the questionnaires of 37 companies with many dishonest or missing values, were used for hypothesis testing. The results of this study can be summarized as follows. First, entrepreneurship had a positive (+) effect on customer orientation, supporting the hypothesis. Second, customer orientation showed a positive (+) effect on customer satisfaction, supporting the hypothesis. Third, customer satisfaction showed a positive (+) effect on financial outcomes, supporting the hypothesis. Fourth, it was found that entrepreneurship influences customer satisfaction through customer orientation, and customer satisfaction affects financial outcomes. It turns out that customer orientation between entrepreneurship and customer satisfaction is completely mediated, and customer satisfaction is completely mediated by customer orientation and financial outcomes. The relationship between entrepreneurship and management improved employee behavior and attitudes, which is an individual outcome, and this change was found to improve customer satisfaction, which is an organizational outcome. It makes frequent contact with customers in the process of servicing them. Employee roles are important at service contacts and influence service purchases. Employees facing customers through service contacts act as a decisive factor in maintaining a continuous relationship with customers. Within a beauty service company, it is necessary to create a customer-oriented environment among workers. It suggests that customer-oriented companies and employees can anticipate their desires and provide products or services of superior value to achieve greater customer satisfaction and a competitive advantage. In addition, it was clarified that customer satisfaction has an aspect relationship with financial management, which is a management result. Therefore, it is suggested that the entrepreneurial spirit is an important factor for the management of a beauty service company to secure competitiveness and improve results.