• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.843-850
• /
• 1994

Polyphosphazene-bound Wittig reagents such as $[NP(OC_6H_5)_{1.7}(OC_6H_4P(Ph)_2$=$CHCH_2CH_2CH_3)_{0.3}]_n$ were synthesized by treating $[NP(OC_6H_5)_{1.7}(OC_6H_4Br)_{0.3}]_n$ with n-butyllithium, diphenylchlorophosphine, and n-butyl iodide. Polymeric reactions were carried out according to the reaction conditions with cyclic primers such as [$N_3P_3(OC_6H_5)_5(OC_6H_4P(Ph)_2$)]. The desired alkene and polymer-bound phosphine oxide were prepared successfully by the reaction of polyphosphazene-bound Wittig reagents with benzophenone.

• Journal of Radiation Protection and Research
• /
• v.14 no.2
• /
• pp.37-44
• /
• 1989

An improved water chemistry technique was studied to reduce radioactivity build-up in reactor coolant system. The technique is convering the current coordinated lithium-boron chemistry regime to the elevated lithium chemistry regime in order to maintain high pH. Correlations between reactor coolant pH and radioactivity build-up were analized by using pH data from domestic PWRs. Consequently, it was founded that high pH chemistry was moer effective for radioactivity build-up reduction than current chemistry regime. This fact had revealed that much portion of reactor coolant corrosion products were nickel ferrite rather than magnetite, and that pH value ranging 7.0-7.4 was appropriate for high-pH chemistry operation.

• Korean Journal of Veterinary Service
• /
• v.20 no.3
• /
• pp.313-321
• /
• 1997

The antibiotic residues of the urine, the liver, the lung, the kidney and the spleen in slaughtered pigs at Kyongbuk province were detected by TLC(505 kit) and EEC-4 plate method. 1. The positive rate of residual sulfamethazine which was detected by 505 kit in the urine (n=200) was 0.0%. 2. The positive rate of residual sulfamethazine which was detected by EEC-4 plate in the urine (n=126), the liver(n=98), the kidney(n=72), the spleen (n=68) and the lung(n=48) were 63%, 49%, 36%, 34% and 24%, respectively. 3. By EEC-4 plate method, the positive detection rates of the urine were 53.0% in BS(pH 6.0), 29.0% in BS(pH 7.2), 11.5% in BS(pH 8.0) and 13.0% in ML(pH 8.0) medium, that of the liver 41.5% in BS(pH 6.0), 22.0% in BS(pH 7.2), 6.5% in BS(pH 8.0) and 5.0%, in ML (pH 8.0) medium, that of the lung 21.0% in BS(pH 6.0), 9.5%, in BS(pH 7.2) and 8.5% in BS(pH 8.0) medium, and that of the kidney 31.5% in BS(pH 6.0), 14.5% in BS(pH 7.2), 20.0% in BS(pH 8.0) and 3.0% in ML(pH 8.0) medium. In the spleen, only in BS(pH 6.0) medium the positive rate was detected as 33.5 %. 4. The positive rates of samples which shown TLC-positive detected by EEC-4 plate method were 53.9% in no band, 77.8% in one band, 80.9% in two bands, 66.7% in three bands, respectively. In conclusion, the EEC-4 plate method could be applied for the detection of residual antibiotics in samples which shown as out of standard Rf values by TLC-method (SOS kit).

• Restorative Dentistry and Endodontics
• /
• v.37 no.1
• /
• pp.16-23
• /
• 2012

Objectives: Present study was undertaken to investigate the crystal growth onto synthetic hydroxyapatite (HA) seeds in pH 4.3 and pH 7.0 supersaturated solutions with different fluoride concentrations. Materials and Methods: 8 groups of pH 4.3 and 7.0 calcium phosphate supersaturated solutions were prepared with different fluoride concentrations (0, 1, 2 and 4 ppm). Calcium phosphate precipitates yield crystal growth onto the HA seed surface while solutions flow. For evaluation of crystallizing process, the changes of $Ca^{2+}$, $PO{_4}^{3-}$, $F^-$ concentrations of the inlet and outlet solutions were determined. The recovered solid samples were weighed to assess the amount of minerals precipitated, and finally determined their composition to deduce characteristics of crystals. Results: During the seeded crystal growth, there were significantly more consumption of $Ca^{2+}$, $PO{_4}^{3-}$, $F^-$ in pH 4.3 solutions than pH 7.0 (p < 0.05). As fluoride concentration increased in pH 4.3 solution, $Ca^{2+}$, $PO{_4}^{3-}$, $F^-$ consumption in experimental solutions, weight increment of HA seed, and fluoride ratio in crystallized samples were increased. There were significant differences among the groups (p < 0.05). But in pH 7.0 solution, these phenomena were not significant. In pH 7.0 solutions, analyses of crystallized samples showed higher Ca/P ratio in higher fluoride concentration. There were significant differences among the groups (p < 0.05). But in pH 4.3 solution, there were not significant differences in Ca/P ratio. Conclusions: Crystal growth in pH 4.3 solutions was superior to that in pH 7.0 solutions. In pH 4.3 solutions, crystal growth increased with showed in higher fluoride concentration up to 4 ppm.

• Journal of Environmental Science International
• /
• v.11 no.4
• /
• pp.347-353
• /
• 2002

This study was conducted to investigate the characteristics of chloramination as a secondary disinfection in a drinking water distribution system. At the range from pH 6 to pH 8, monochloramine was predominant with a trace of dichloramine, and the free chlorine was detected after breakpoint. At $25^{\circ}C$, the breakpoints of pH 6, 7 and 8 appeared when the weight ratios of chlorine to ammonia nitrogen were 11:1, 9:1 and 10:1 respectively, and the peak points on the breakpoint curves at pH 6, 7 and 8 were in the Cl$_2$ / NH$_3$-N ratio of 9:1, 6:1 and 5:1 respectively. As pH increased from 6 to 8, maximum point of monochloramine on the breakpoint curve was moved from 7:1 to 5:1 in the weight ratio of chlorine to ammonia nitrogen. The maximum concentration of monochloramine was formed at the pH values of 7~8 and in the Cl$_2$ / NH$_3$-N ratio below 5:1. As the Cl$_2$/NH$_3$-N ratio increased and the pH lowered, chloramines decay proceeded at an increased rate, and residual chloramines lasted longer than the residual free chlorine. The monochloramine and the dichloramine were formed at pH 6, and then the dichloramine continued increasing with contact time.

• Journal of the Korean Chemical Society
• /
• v.44 no.3
• /
• pp.281-285
• /
• 2000

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2428-2432
• /
• 2011

A series of new 4-aryl-6,8-dimethylpyrimido[4,5-c]pyridazine-5,7(6H,8H)-diones have been synthesized via three component reaction of 1,3-dimethylbarbituric acid with arylglyoxals in the presence of hydrazinium dihydrochloride in ethanol. All of these derivatives may act as potential monoamine oxidase inhibitors.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.186-191
• /
• 1998

$UO_2$-5wt%CeO$_2$ 분말에서 소결온도(1600, 1$700^{\circ}C$), 소결분위기(H$_2$, $N_2$-7vol.%H$_2$) 및 Li$_2$O 첨가량(0.05-2wt%)에 따른 소결성의 변화를 관찰하였다. $UO_2$-5wt%CeO$_2$를 attrition mill에서 2 시간까지 분쇄한 후, 1$700^{\circ}C$에서 H$_2$, N2-7vol.%H$_2$ 분위기에서 소결하면 소결밀도가 각각 10.46, 10.36 g/㎤이지만, 각 분위기에서 소결체내의 결경립크기가 일정하지 않고 Ce agg1omerate도 소결체내의 여러 곳에 분포되어 있어 분말처리만으로 소결성을 개선하는데는 한계가 있었다. 반면에, $UO_2$-5wt%CeO$_2$에 0.lwt%Li$_2$O를 첨가하여 1 시간동안 분쇄란 후, 1$600^{\circ}C$에서 H$_2$$N_2$-7vol.%H$_2$ 분위기로 소결하면 밀도는 각각 10.51, 10.48 g/㎤이었고, 결정립크기는 각각 8.9, 42.1 $\mu\textrm{m}$이었다. 즉, Li$_2$O의 첨가에 의해 밀도와 결정립크기가 모두 증가했으며, H$_2$ 분위기보다는 $N_2$-7vol.%H$_2$ 분위기에서 결정립이 더 크게 성장하였고, 1$700^{\circ}C$에서도 유사한 경향을 나타내었다. $UO_2$-5wt%CeO$_2$와 이 조성에 0.lwt%Li$_2$O를 첨가한 분말들을 H$_2$ 및 $N_2$-7vol.%H$_2$ 분위기에서 소결하여 기공크기 및 기공부피의 변화를 관찰한 결과, H2 분위기에서 소결하였을 때는 Li$_2$O의 첨가에 의해 치밀화가 주로 일어났고, 반면에 $N_2$-7vol.%H$_2$ 분위기에서 소결하면 Li$_2$O의 첨가에 의해 작은 기공은 소멸되고 큰 기공이 생성되었다.

• KSBB Journal
• /
• v.11 no.6
• /
• pp.676-680
• /
• 1996

The characteristics of controlled drug release were studied for a biodegradable drug delivery system. A biodegradable chitosan matrix was prepared after swelling chitosan with 10%-acetic acid and adding sulfadiazine. The release behavior of sulfadiazine from the chitosan matrix was studied using the Higuchi's diffusion controlled model in phosphate buffer solutions of pH 7.4 and pH 1.2. The drug release time was delayed by increasing the content of sulfadiazine. The drug release at pH 7.4 was more delayed than that at pH 1.2. The reason is that chitosan has greater swelling abilities at low pH than at high pH. The apparent release rate constant(K) increased as the concentration of drug increased. In shoat, the formulation the biodegradable chitosan matrix to suppress the burst effect of drug release mechanism, which led to a sustained release pattern.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.498-503
• /
• 2007

The performance of elutriated acid fermentation to evaluate the effects of microwave irradiation and pH control as pretreatment was investigated. The MW pH 7 reactor which was used the pretreated primary sludge as microwave irradiation was operated at pH 7 and $35^{\circ}C$. The EAF pH 9 reactor was operated at pH 9 and $35^{\circ}C$ without pretreatment. The SCOD and VFAs production rate were 0.17 gSeOD/gVSrem. and 0.27 gVFAs as COD/gVSrem. in MW pH 7 reactor, 0.16 gSCOD/gVSrem. and 0.24 gVFAs as COD/gVSrem. in EAF pH 9 reactor, respectively. VS and Volume reduction were 54% and 48% in MW pH 7 reactor, 54.6% and 36% in EAF pH 9 reactor, respectively. A comparison of the microwave irradiation and controlled pH in elutriated acid fermentation showed that the former is more efficient in SCOD and VFAs production and it rises to slightly higher reduction in the volume of the sludge. In addition, E. coli. was not detected in the wasting sludge of MW pH 7 reactor. Based on the results, microwave irradiation appeared to be one of the viable options for generating class A sludge. According to the batch tests, sequencing batch test which was used the pretreated primary sludge as microwave was performed at pH 7 and $35^{\circ}C$, SCOD production was 0.16 gSCOD/gVSrem., VS reduction and volume reduction were 64% and 63%, respectively.