• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.4
• /
• pp.499-505
• /
• 2020

We investigated growth, survival and stress response depending on salinity changes in hybrid grouper (Epinephelus fuscoguttatus ♀×E. polyphekadion ♂, BCG) juvenile. Experiment I (Exp I), the hybrids were stocked at 32 psu and reared for 30 days under decreasing salinity at a rate of 5-7 psu per day (25, 20, 15, 10, 5 psu). Experiment II (Exp II), the salinity was decreased from 32 psu to 5 psu during a period of 24, 48 and 72 h. Experiment III (Exp III), acclimatized BCGs were exposed from 5 psu to decreasing salinity at 0, 1, 2, 3, 4 psu. In the Exp I, 90% survival only in the 5 psu. Growth were 5 and 32 psu had significantly low growth than other treatment. In the Exp II 100% survived by the end of the experiment. The plasma cortisol level was highest in the treatment the salinity rapidly dropped, but all the treatment recovered quickly after 24 h of salinity reduction. In the Exp III, the lower the salinity, the faster the mortality occurred in salinity below 5 psu. It is therefore concluded that the BCGs are highly tolerant of low salinity and the salinity tolerance threshold is 5 psu.

• Journal of Surface Science and Engineering
• /
• v.31 no.1
• /
• pp.12-23
• /
• 1998

The Thermal Barrier Coating(TBC) has been used to improve the heat barrier and tribological properties of the aircraft engine and the automobile engine in high temperature. Especially, the high temperature tribological propertied of the cylinder haed and the piston crown of diesel engine was emphasized. Therefore, the purpose of this work was to evaluate the microstructure, tribological propeer in high tempearmal shock resistance and bonding strength of five layer functionally gradient TBC for the applications. The five layerwere composed with 100% ceramic insulating later, 75(ceramic):25 (metal) layer, 50:50 layer, 25:75 layer and 100% metal bonding layer to redude the thermal stress. the YSL and MSL poweders were the insulation ceramics powers. The NiCrAly, Inconel625 and SUS powders were the bonding and mixingg powders for plasma spray process. According to the result of high temperature wear test, the wera resistance of YSZ/NiCrAlY siytem was most out standing at 600 and $800^{\circ}C$. At $400^{\circ}C$, the wear resistance of YSZ/Inconel system was better than others. Wear volume at other temperature because of the low temperature degration of zirconia. The thermal shock mechanism of 5 later is the vertical crack gegration in insulating layer. this means that the initial cracks were generated in the top layer, and then developed into the composite layers during thermal shock test. Finally, these cracks werereached to the interface of coating and substrate and also, these vertioal cracks join with the horizontal cracks of the each layers. The bonding strength of YSZ/NiCrAlY and YSZ/Inconel 5 layer system is better than other 5layer systems. The theramal shock resistance of thermal barrier coating s with 5 layer system is better than that of 3 layers and 2 layers.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.23 no.3
• /
• pp.189-230
• /
• 2020

The metabolic syndrome, by definition, is not a disease but is a clustering of individual metabolic risk factors including abdominal obesity, hyperglycemia, hypertriglyceridemia, hypertension, and low high-density lipoprotein cholesterol levels. These risk factors could dramatically increase the prevalence of type 2 diabetes and cardiovascular disease. The reported prevalence of the metabolic syndrome varies, greatly depending on the definition used, gender, age, socioeconomic status, and the ethnic background of study cohorts. Clinical and epidemiological studies have clearly demonstrated that the metabolic syndrome starts with central obesity. Because the prevalence of obesity has doubly increased worldwide over the past 30 years, the prevalence of the metabolic syndrome has markedly boosted in parallel. Therefore, obesity has been recognized as the leading cause for the metabolic syndrome since it is strongly associated with all metabolic risk factors. High prevalence of the metabolic syndrome is not unique to the USA and Europe and it is also increasing in most Asian countries. Insulin resistance has elucidated most, if not all, of the pathophysiology of the metabolic syndrome because it contributes to hyperglycemia. Furthermore, a major contributor to the development of insulin resistance is an overabundance of circulating fatty acids. Plasma fatty acids are derived mainly from the triglycerides stored in adipose tissues, which are released through the action of the cyclic AMP-dependent enzyme, hormone sensitive lipase. This review summarizes the latest concepts in the definition, pathogenesis, pathophysiology, and diagnosis of the metabolic syndrome, as well as its preventive measures and therapeutic strategies in children and adolescents.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.327-327
• /
• 2011

DLC 필름은 바이오 적합성, 특히 생체 적합성이 뛰어나기 때문에 바이오 코팅분야에서 널리 이용된다. 많은 연구 결과에 의하면 세포와 장기 등이 바이오 재료 표면에 적절히 접합할 수 있도록, 재료 표면을 산소나 질소를 이용하여 플라즈마 처리로 초친수성 표면으로 개질하고 있다. 하지만, 시간이 지남에 따라서 친수성 표면은 점차 재료의 표면 처리 전의 성질인 소수성을 회복하게 된다. D실제 생체에 적용하기 위해서 이러한 시효 효과에 대한 정확한 평가가 이루어져야 한다. 따라서 산소와 질소 플라즈마 처리 후의 친수성 성질이 소수성 성질로 변해가는 거동을 조사하는게 중요하다. 13.56 MHz의 plasma assisted chemical vapor deposition (PACVD) 법을 이용하여 DLC와 Si-DLC를 500 ${\mu}m$ 두께의 P-type 실리콘(100) 기판에 증착하였다. 박막 증착 과정에 사용한 기체는 벤젠과 희석된 silane이 사용되었다(SiH4/H2=10:90). 박막 증착은 -400 V의 바이어스 전압을 인가하였으며, 이때 증착 압력은 1.33Pa으로 일정하게 유지하여, 두께 $0.55{\pm}0.01{\mu}m$로 증착하였다. X-ray Photoelectron Spectroscopy (XPS) 법을 이용하여 실리콘 함량을 측정하였으며, 증착 된 Si-DLC의 실리콘 함량은 0~4.88 at. %였다. 이후에 질소와 산소 플라즈마를 이용하여 챔버 압력을 1.33 Pa로 유지하여, -400 V의 바이어스 전압을 인가하여 10분간 표면 처리를 하였다. 표면 처리된 DLC와 Si-DLC 표면 위에서의 물방울(water droplet)의 젖음각을 20일간 측정하였다. 플라즈마 표면 처리 된 모든 시편에서 초기 젖음각은 $10{\sim}20^{\circ}$의 친수성 성질을 보였지만, 점차 젖음각이 상승하여 산소 플라즈마 처리 된 Si-DLC를 제외하고는 5일이 지나면서 거의 소수성 표면으로 회복되었다. 산소 플라즈마 처리 된 Si-DLC의 경우, 젖음 각 측정 기간(20일) 동안 $15^{\circ}$ 미만의 친수성 성질을 유지하였다.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.2
• /
• pp.73-83
• /
• 1994

Applications of liposomes as a drug carrier for the oral delivery of poorly-absorbable macromolecular drugs have been limited, because of their instability in gastrointestinal environments including pH, bile salts, and digestive enzymes. Two polysaccharides, dextran(DX) and pullulan(PL), were introduced to the preformed liposomes in order to enhance the stability. Palmitoyl derivatives of polysaccharides, palmitoyldextran(PalDX) and palmitoylpullulan(PalPL), were synthesizd and introduced to the liposomes during preparation for the same purpose of stability. The effects of these polysaccharides coating were evaluated basically by physical properties of particle size distribution and optical microscopy, then compared with uncoated liposomes by the observations of both in vitro stability and in vovo absorption characteristics. The geometric mean diameters of polysaccharide-coated liposomes were greater than that of uncoated liposome, showing the outermost polysaccharide-coated layer under the optical microscopy. In vitro stabilities of uncoated or polysaccharides-coated liposomes were measured by turbidity changes in various pH buffer solutions containing sodium choleate as bile salts. While uncoated liposome was very sensitive to bile salts, polysaccharides-coated liposomes were stable in relatively higher concentrations of sodium choleate, giving the results of better stability of PalDX- and PalPL-coated liposomes than that of DX- and PL-coated liposomes. After liposomal encapsulation of acyclovir(ACV), an antiviral agent as a model drug, it has been administered orally to rats as dose of ACV 40 mg/kg. Plasma concentrations of ACV were assayed by HPLC and analyzed by model-independent pharmacokinetics. Pharmacokinetic parameters of Cmax, tmax, and [AUC] have been compared.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.11-16
• /
• 2006

This paper reports the correlation between dielectric constant and degree of amorphism of the hybrid type SiOC thin films. SiOC thin films were deposited by high density plasma chemical vapor deposition using bistrimethyl- silylmethane(BTMSM,$H_{9}C_{3}-Si-CH_{2}-Si-C_{3}H_{9}$) and oxygen precursors with various flow rate ratio. As-deposited film and annealed films at $400^{\circ}C$ were analyzed by XRD. The SiOC thin films were amorphous from XRD patterns. For quantitative analysis, the diffraction pattern of the samples was transformed to radial distribution function by Fourier analysis, and then compared with each other. The degree of amorphism of annealed films was higher than that of as-deposited ones. The dielectric constant varied in accordance with flow rate ratio of precursors. The lowest dielectric constant was obtained from the as-deposited film which has the highest degree of amorphism after annealing.

• Korean Journal of Materials Research
• /
• v.9 no.11
• /
• pp.1049-1054
• /
• 1999

Two-step growth method is suggested to enhance the alignment of highly oriented diamond films. (100) Si wafers are pretreated with negative biasing of - 200 V at $850^{\circ}C$ for 20 min with 4 % methane in hydrogen plasma. The pretreated wafers are grown under the lst-step growth conditions(2 % CH$_4$ in H$_2$, $810^{\circ}C$) from 2 hr to 35 hr, in order to obtain <100> textured films. The 2nd-step growth(2 % CH$_4$ in H$_2$, $850^{\circ}C$) is carried out to make diamond films having (100) growth planes, which are parallel to the substrate. The alignment of the films after the 1st-step growth, has been analyzed by {111} X-ray pole figure, which is improved abruptly with increasing film thickness. However, the pyramidal surface morphology is inevitable. These morphology is flattened after the 2nd-step growth by developing the (100) facets parallel to the substrate. The alignment of the highly oriented textured films after the two-step growth depends on the thickness of the 1st-step growth film.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.395-403
• /
• 2006

It is known that $MgAl_2O_4$ has higher resistance to moisture than MgO, in humid ambient MgO is chemically unstable. It reacts very easily with moisture in the air. In this study, the characteristic of $MgAl_2O_4$ and $MgAl_2O_4/MgO$ layers as dielectric protection layers for AC- PDP (Plasma Display Panel) have been investigated and analysed in comparison for conventional MgO layers. MgO and $MgAl_2O_4$ films both with a thickness of $1000\AA$ and $MgAl_2O_4/MgO$ film with a thickness of $200/800\AA$ were grown on the Cu substrates using the electron beam evaporation. $1000\AA$ thick aluminium layers were deposited on the protective layers in order to avoid the charging effect of $Ga^+$ ion beam while the focused ion beam(FIB) is being used. We obtained sputtering yieds for the MgO, $MgAl_2O_4$ and $MgAl_2O_4/MgO$ films using the FIB system. $MgAl_2O_4/MgO$ protective layers have been found th show $24{\sim}30%$ lower sputtering yield values from 0.244 up to 0.357 than MgO layers with the values from 0.364 up to 0.449 for irradiated $Ga^+$ ion beam with energies ranged from 10 kV to 14 kV. And $MgAl_2O_4$ layers have been found to show lowest sputtering yield values from 0.88 up to 0.109. Secondary electron emission coefficient(g) using the ${\gamma}$- FIB. $MgAl_2O_4/MgO$ and MgO have been found to have similar g values from 0.09 up to 0.12 for indicated $Ne^+$ ion with energies ranged from 50 V to 200 V. Observed images for the surfaces of MgO and $MgAl_2O_4/MgO$ protective layers, after discharge degradation process for 72 hours by SEM and AFM. It is found that $MgAl_2O_4/MgO$ protective layer has superior hardness and degradation resistance properties to MgO protective layer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.154-161
• /
• 2008

Phellinus linteus (PL) has been known to exhibit potent biological activity. The present study was designed to investigate lipase-inhibitory and anti-oxidative activity of the methanol extract and the powder of PL fruiting body. The methanol extract of PL appeared to have the inhibitory activity against pancreatic lipase with an $IC_{50}$ value of $36.3\;{\mu}g/mL$, and the scavenging activity of DPPH radical with an $IC_{50}$ value of $20.1\;{\mu}g/mL$, which was similar to that of vitamin C ($IC_{50}\;18.3\;{\mu}g/mL$). To investigate the lipase-inhibitory and anti-oxidative effect of PL on animal, Sprague-Dawley rats were fed with high-fat diet supplemented with either 2% or 5% PL powder for 8 weeks. Total food intake was significantly increased, but body weight was not changed by PL powder supplementation. However, fecal fat excretion of the experimental groups fed with the PL powder were higher than that of the control group. PL powder showed a decrease in the plasma total cholesterol, LDL-cholesterol, and the hepatic total cholesterol levels. The anti-oxidative enzyme activities were also affected by PL supplementation. Glutathione peroxidase (GSH-Px) in the plasma and liver were significantly increased by 98% and 46% in the 2% PL group, and 99% and 32% in the 5% PL group, respectively. Total superoxide dismutase (T-SOD) activity was not affected by PL supplementation. DNA damage was measured by the comet assay in the lymphocytes collected after 2 weeks, 4 weeks, and 8 weeks of feeding PL supplemented diet. Lymphocyte DNA damage was decreased in the PL supplemented group. Furthermore, PL feeding enhanced the resistance to lymphocyte DNA damage caused by an oxidant challenge with $H_2O_2$.

• Korean Journal of Food Science and Technology
• /
• v.44 no.5
• /
• pp.600-606
• /
• 2012

A Bacillus sp. that produces fibrinolytic enzyme was isolated from Cheonggukjang, a traditional Korean soybean-fermented food. According to 16S rRNA gene base sequencing, the bacillus was identified as a variety of Bacillus subtilis, and named Bacillus subtilis IDCC 9204. Fibrinolytic enzyme NK-IL9204 was stable up to $60^{\circ}C$ and within pH range of 5-10. Purified NK-IL9204 was detected through fibrin zymography. The molecular weight and isoelectric point of the enzyme were estimated to be 27.7 kDa and 6.7 by SDS-PAGE and 2D electrophoresis, respectively. Its amino acid sequence was similar to that of nattokinase (identities 99.5%) and different from that of nattokinase BPN (identities 86.4%). The plasma fibrinolytic activity of NK-IL9204 was measured by euglobulin clot lysis times (ECLT). The NK-IL9204 was orally administered to SD rats for 3 weeks (1,000 FU/rat/day). The ECLT was significantly shortened by supplementation of NK-IL9204.