• 제목/요약/키워드: H1-H2 measure

검색결과 809건 처리시간 0.031초

Measuring the matter energy density and Hubble parameter from Large Scale Structure

  • 이석천
    • 천문학회보
    • /
    • 제38권2호
    • /
    • pp.57.1-57.1
    • /
    • 2013
  • We investigate the method to measure both the present value of the matter energy density contrast and the Hubble parameter directly from the measurement of the linear growth rate which is obtained from the large scale structure of the Universe. From this method, one can obtain the value of the nuisance cosmological parameter $\Omo$ (the present value of the matter energy density contrast) within 3% error if the growth rate measurement can be reached $z >3.5$. One can also investigate the evolution of the Hubble parameter without any prior on the value of $H_0$ (the current value of the Hubble parameter). Especially, estimating the Hubble parameter are insensitive to the errors on the measurement of the normalized growth rate $f \sigma_8$. However, this method requires the high $z$ ($z >3.5$) measurement of the growth rate in order to get the less than 5% errors on the measurements of $H(z)$ at $z \leq 1.2$ with the redshift bin $\Delta z = 0.2$. Thus, this will be suitable for the next generation large scale structure galaxy surveys like WFMOS and LSST.

  • PDF

피리딘과 할로겐 또는 할로겐간 화합물 사이의 전하이동 착물생성에 관한 열역학적 연구 (The Thermodynamics of the Formation of Pyridine-Halogen and Interhalogens Charge Transfer Complexes)

  • 권오천;경진범;최기준
    • 대한화학회지
    • /
    • 제26권6호
    • /
    • pp.363-368
    • /
    • 1982
  • 피리딘과 요오드, 일브롬화요오드 및 일염화요오드 사이에 생성되는 전하이동 착물을 사염화탄소 용액내에서 자외선 분광 광도법을 사용하여 연구한 결과$ C_5H_5N{\cdot}I_2}$, $ C_5H_5N{\cdot}IBr$$ C_5H_5N{\cdot}ICl$형의 1:1 분자 착물이 생성됨을 알았다. 이들 착물 생성에 대한 흡수최대는 온도가 상승함에 따라 blue shift 되므로 이를 고려하여 각 온도에서의 평형 상수와 흡광계수를 구하였다. 이 값으로부터 이들 착물 생성에 대한 ${\Delta}H$, ${\Delta}D$${\Delta}S$의 열역학적 파라미터를 산출하였다. 이 결과 착물의 상대적 안정도가 다음과 같은 순서로 됨을 알 수 있었다. $ C_5H_5N{\cdot}I_2$ < $ C_5H_5N{\cdot}IBr$ < $ C_5H_5N{\cdot}ICl$ 이 순서는 피리딘에 대한 그들의 상대적 산성도를 의미하며 전자수용체의 편극율 및 할로겐 원자의 전기 음성도의 차이에 의하여 설명될 수 있다.

  • PDF

액상소화제가 법랑질 부식에 미치는 영향 (The Effect of Digestive Medicine on Enamel Erosion)

  • 이혜진;오한나
    • 치위생과학회지
    • /
    • 제17권4호
    • /
    • pp.352-357
    • /
    • 2017
  • 액상소화제의 법랑질 부식능을 알아보기 위하여 마트에서 쉽게 구입할 수 있는 2종의 액상소화제와 약국에서 판매하는 1종의 액상소화제 그리고 대조군으로 생수를 선정하였다. 음료의 pH와 적정산도를 측정하고, 시편을 제작하여 음료에 1, 3, 5, 10, 15, 30분을 침지한 후 나타나는 양상을 표면 미세 경도계로 측정하여 다음과 같은 결론을 얻었다. 대조군인 생수를 제외한 모든 액상소화제의 pH가 4.0 이하로 나타났으며 위청수에서 $2.93{\pm}0.00$으로 가장 낮았다. pH 5.5로 변환하는 데 필요한 적정산도 또한 위청수에서 1.27 ml로 가장 높게 나타났다. 모든 액상소화제에서 침지시간이 증가함에 따라 표면경도가 감소하였으며 음료 30분 처리 후 표면 경도값은 위청수에서 $207.80{\pm}15.52$ VHN으로 가장 낮았고, 까스활명수 $216.86{\pm}4.01$, 생록천 $223.28{\pm}9.56$ 순이었다. 실험에 사용된 모든 액상소화제는 치아 법랑질에 부식을 유발하였으며, 음료처리 후에 pH가 가장 낮고 적정산도가 가장 높은 위청수에서 가장 낮은 표면 경도 값을 보여 실험에 사용된 액상소화제 중 가장 많은 법랑질 부식을 유발하였다. 따라서 액상소화제의 섭취는 법랑질표면경도를 감소시켜 치아 부식을 유발할 수 있으므로 이에 대한 대처방안이 마련되어야 할 것이다.

흰쥐 해마 절편에서 산소고갈에 의한 [$^3H$-5-hydroxytryptamine 유리변동에 미치는 포도당고갈의 영향 (The Effect of Glucose Deprivation on the Oxygen Deprivation-induced Changes of [[$^3H$]-5-hydroxytryptamine Release in Rat Hippocampal Slices)

  • 이경은
    • Toxicological Research
    • /
    • 제14권4호
    • /
    • pp.483-488
    • /
    • 1998
  • During cerebral ischemia two important factors such as hypoxia and reduction of glucose can act as modulating stressor affecting the release of amine neurotransmitters including 5-hydroxytryptamine (5-HT). This study was performed to investigate the effect of glucose deprivation on the oxygen deprivation-induced changes of [3H]-5-HT release in the rat hippocampal slices. Experimental groups were divided into 4 groups for this study: normoxic/normoglycemic group, oxygen-deprived group, glucose-deprived group, and oxygen/glucose-deprived group. The hippocampus of rat brain was sliced by 400 $\mu\textrm{m}$ thickness with manual chopper. After 30 minutes preincubation in the normal buffer, the slices were incubated for 20 min in buffer containing [3H]-5-HT (0.1 M, 74 $\mu\textrm$Ci) for uptake. To measure the release of [3H]-5-HT into the buffer, the incubation medium was drained of and refilled with fresh buffer every ten minutes through a sequence of 14 tubes. Oxygen deprivation by gassing with 95% $N_2$/5% $CO_2$ and/or glucose deprivation was done in the 6th and 7th tube. The radioactivities in each buffer and the tissue were counted using scintillation counter. The results were expressed as fractional release. When slices were exposed to oxygen-deprived media for 20 min, the diminution followed by the rebound release of [3H]-5-HT was observed during the post-oxygen deprived period. However, glucose deprivation or oxygen/glucose deprivation markedly increased the release of [3H]-5-HT. which was opposite to the pattern observed in oxygen-deprived group. These results suggested that oxygen deprivation itself inhibits [3H]-5-HT release in rat hippocampal slices during oxygen-deprived period, but additional glucose deprivation convert the inhibitory response to increase of [3H]-5-HT release.

  • PDF

과산화수소/케로신 점화용 분사기 설계 및 분무특성에 관한 연구 (A Study of Design of $H_2O_2$/Kerosene Ignition Injector and Spray Characteristics)

  • 김보연;황오식;이양석;고영성;김유;김선진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.37-40
    • /
    • 2009
  • 본 연구에서는 케로신/과산화수소 점화용 분사기의 설계/제작하여 분무특성에 관한 연구를 수행하고자 하였으며, 이에 앞서 촉매점화방식으로 적용할 때 가장 적합한 분사기를 설계하고자 하였다. 설계/제작된 분사기를 수류시험을 통해 질량 유량 및 분산각을 측정하였다. 그 결과 케로신의 목표 질량유량(12.88 g/s)은 설계 차압과 같은 차압인 3 bar에서 측정되었으며, 이 때 분산각은 $40^{\circ}$을 확인하였다. 또한 과산화수소의 목표 질량 유량(94.39 g/s)은 설계 차압(3 bar) 보다 작은 1 bar에서 측정됨을 확인하였다.

  • PDF

와이어 스크린 리브이 열전달과 마찰계수에 미치는 효과 (Effects of the Wire-screen Rib on Heat Transfer and Friction Factors)

  • 오세경;안수환;이대희
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제35권2호
    • /
    • pp.196-203
    • /
    • 2011
  • 유체 유동에 수직인 방향으로 반복적 리브이 설치된 사각 채널에서 열전달 계수와 마찰계수를 측정하기 위해 실험을 수행하였다. 시험부의 치수는 198 mm(폭)과 40 mm(높이) 그리고 길이가 712mm인 직사각형 채널이다. 시험부 채널의 형상비는 4.95이고 수력 직경 $D_h$은 6.66 cm이었다. 4종류의 와이어 스크린 리브(rib)과 한 개의 일체형 리브을 사용하였다. 0.1 mm 두께의 스테인레스 강판 히터와 T형 열전대를 사용하였다. 레이놀즈 수의 범위는 20,000에서 60,000이었다. 수력직경($D_h$)과 리브의 높(e)이 비($e/D_h$)는 0.075이고 리브 간격(p) 대 높이(e)으 비(p/e)는 10이다. 연구결과 일체형 리브이 누셀트수와 마찰계수 모두 가장 컸다.

금 나노입자 형성을 이용한 계층구조 SiO2 코팅층의 제조 및 표면 특성 (Synthesis and Surface Properties of Hierarchical SiO2 Coating Layers by Forming Au Nanoparticles)

  • 김지영;김은경;김상섭
    • 한국재료학회지
    • /
    • 제23권1호
    • /
    • pp.53-58
    • /
    • 2013
  • Superhydrophobic $SiO_2$ layers with a micro-nano hierarchical surface structure were prepared. $SiO_2$ layers deposited via an electrospray method combined with a sol-gel chemical route were rough on the microscale. Au particles were decorated on the surface of the microscale-rough $SiO_2$ layers by use of the photo-reduction process with different intensities ($0.11-1.9mW/cm^2$) and illumination times (60-240 sec) of ultraviolet light. With the aid of nanoscale Au nanoparticles, this consequently resulted in a micro-nano hierarchical surface structure. Subsequent fluorination treatment with a solution containing trichloro(1H,2H,2H,2H-perfluorooctyl)silane fluorinated the hierarchical $SiO_2$ layers. The change in surface roughness factor was in good agreement with that observed for the water contact angle, where the surface roughness factor developed as a measure needed to evaluate the degree of surface roughness. The resulting $SiO_2$ layers revealed excellent repellency toward various liquid droplets with different surface tensions ranging from 46 to 72.3 mN/m. Especially, the micro-nano hierarchical surface created at an illumination intensity of $0.11mW/cm^2$ and illumination time of 60 sec showed the largest water contact angle of $170^{\circ}$. Based on the Cassie-Baxter and Young-Dupre equations, the surface fraction and work of adhesion for the micronano hierarchical $SiO_2$ layers were evaluated. The work of adhesion was estimated to be less than $3{\times}10^{-3}N/m$ for all the liquid droplets. This exceptionally small work of adhesion is likely to be responsible for the strong repellency of the liquids to the micro-nano hierarchical $SiO_2$ layers.

DISCOVERY OF A STRONG LENSING GALAXY EMBEDDED IN A CLUSTER AT z = 1.62

  • WONG, KENNETH C.;TRAN, KIM-VY H.;SUYU, SHERRY H.;MOMCHEVA, IVELINA G.;BRAMMER, GABRIEL B.;BRODWIN, MARK;GONZALEZ, ANTHONY H.;HALKOLA, ALEKSI;KACPRZAK, GLENN G.;KOEKEMOER, ANTON M.;PAPOVICH, CASEY J.;RUDNICK, GREGORY H.
    • 천문학논총
    • /
    • 제30권2호
    • /
    • pp.389-392
    • /
    • 2015
  • We identify a strong lensing galaxy in the cluster IRC 0218 that is spectroscopically confirmed to be at z = 1.62, making it the highest-redshift strong lens galaxy known. The lens is one of the two brightest cluster galaxies and lenses a background source galaxy into an arc and a counterimage. With Hubble Space Telescope (HST) grism and Keck/LRIS spectroscopy, we measure the source redshift to be $z_S=2.26$. Using HST imaging, we model the lens mass distribution with an elliptical power-law profile and account for the effects of the cluster halo and nearby galaxies. The Einstein radius is $^{\theta}E=0.38^{+0.02{\prime}{\prime}}_{-0.01}$ ($3.2^{+0.2}_{-0.1}kpc$) and the total enclosed mass is $M_{tot}(<^{\theta}_E)=1.8^{+0.2}_{-0.1}{\times}10^{11}M_{\odot}$. We estimate that the cluster environment contributes ~ 10% of this total mass. Assuming a Chabrier IMF, the dark matter fraction within $^{\theta}E$ is $f^{Chab}_{DM}=0.3^{+0.1}_{-0.3}$, while a Salpeter IMF is marginally inconsistent with the enclosed mass ($f^{Salp}_{DM}=-0.3^{+0.2}_{-0.5}$).

ERROR HOUNDS OF TRAPEZOIDAL RULE

  • Meehyea Yang;Hong, Bum-Il;Yang, Hyun-Suk
    • Journal of applied mathematics & informatics
    • /
    • 제13권1_2호
    • /
    • pp.353-363
    • /
    • 2003
  • In [2], if ${\gamma}$ $\leq$ 2, the average error of the composite Trapezoidal rule on two consecutive intervals turned out to be proportional to h$\^$2r+3/ where ${\gamma}$ is the number of differentiablity and h is the length of each uniform subinterval of the interval [0, 1] In this paper, we show that if ${\gamma}$ $\geq$ 3, the average error of the composite Trapezoidal rule on two consecutive intervals is bounded by Ch$\^$8/.

전기강판의 자기특성 측정을 위한 2방향 여자 형 Single Sheet tester 개발 (Double-Excitation Type Single Sheet Tester for the Measurement of the Magnetic Characteristics of the Electrical Steel Sheets)

  • 김홍정;고창섭;홍선기;신판석
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제54권10호
    • /
    • pp.461-469
    • /
    • 2005
  • In this paper, a double-excitation type single sheet tester is developed to measure the magnetic characteristics of the electrical steel sheets. The developed system has the uniform magnetic field area of 20$\times$20mm$^{2}$, and can be applied to the measurement of the magnetic characteristics of the Non-oriented and Grain oriented electrical steel sheets. In the developed system, the magnetic flux density and magnetic field intensity are measured by using B-coil and H-coil, respectively. The B-coil has 1 turn search coil for each direction, and H-coil has 640 and 640 turns for rolling direction and transverse direction on the Im thickness Glass-Epoxy basement, respectively. Through experiments, it Is shown that the system can measure the magnetic characteristics up to 1.87 of magnetic flux density in the rolling direction in case of the Grain oriented electrical steel sheet. The measured results are compared with those measured in Okayama university, .Japan.