Double-Excitation Type Single Sheet Tester for the Measurement of the Magnetic Characteristics of the Electrical Steel Sheets

전기강판의 자기특성 측정을 위한 2방향 여자 형 Single Sheet tester 개발

  • 김홍정 (충북대 전기전자 컴퓨터 공학부) ;
  • 고창섭 (충북대 전기전자 컴퓨터 공학부) ;
  • 홍선기 (호서대 전기정보통신공학부) ;
  • 신판석 (홍익대 전기공학과)
  • Published : 2005.10.01

Abstract

In this paper, a double-excitation type single sheet tester is developed to measure the magnetic characteristics of the electrical steel sheets. The developed system has the uniform magnetic field area of 20$\times$20mm$^{2}$, and can be applied to the measurement of the magnetic characteristics of the Non-oriented and Grain oriented electrical steel sheets. In the developed system, the magnetic flux density and magnetic field intensity are measured by using B-coil and H-coil, respectively. The B-coil has 1 turn search coil for each direction, and H-coil has 640 and 640 turns for rolling direction and transverse direction on the Im thickness Glass-Epoxy basement, respectively. Through experiments, it Is shown that the system can measure the magnetic characteristics up to 1.87 of magnetic flux density in the rolling direction in case of the Grain oriented electrical steel sheet. The measured results are compared with those measured in Okayama university, .Japan.

Keywords

References

  1. 에너지관리공단, 전기수요관리, 1994
  2. H.E. Jordan, 'Energy-efficient electric motors and their application', Plenum Press, 1994
  3. A. Ikariga, M. Enokizono, H. Shirnoji and K. shuto, 'Core material design of rotating machines with a new topology', ICEMS2004, October 31 - November 3, 2004
  4. 'Method of measurement of the magnetic properties of magnetic steel sheet and strip by means of a single sheet tester', JIS C 2556, 1996
  5. M. Enokizono and N. Soda, 'Finite element analysis of transformer model core with measured reluctivity tensor', IEEE Trans. on Magnetics, Vol. 33, No.5, pp.410-4112, September. 1997 https://doi.org/10.1109/20.619679
  6. K. Fujiwara, T. Adachi, and N. Takahashi, 'A proposal of finite-element analysis considering two-dimensional magnetic properties', IEEE Trans. on Magnetics, Vol. 38, No.2, pp.889-892, March. 2002 https://doi.org/10.1109/20.996229
  7. H. Mimura, M .Nakano, K. fujiwara, 'Excitation characteristics of a single sheet tester for the 2-D magnetic properties', The papers of Technical Meeting on Magnetics of IEE Japan MAG-02-188. December. 2002
  8. K. Atallah, and D. Howe, 'Calculation of the rotational power loss in electrical steel sheet laminations from measured Hand B', IEEE Trans. on Magnetics, Vol. 29, No.6, pp. 3547-3549, November. 1993 https://doi.org/10.1109/20.281225
  9. K. fujiwara, 'Investigation on methods of description of a permeability tensor', The papers of Technical Meeting on Magnetics of IEE Japan MAG-00-255, November. 2000