• Journal of Environmental Health Sciences
• /
• v.40 no.6
• /
• pp.477-483
• /
• 2014

Objectives: This study was carried out to investigate the characteristics of odors emitted from sewage in a sanitary sewer and its outlets. Methods: The concentration of mal-odorous sulfur was analyzed by gas chromatograph, and odor intensity was estimated by an on-site sensory test. Odor intensity calculated from instrumental analysis results was compared with odor intensity observed at field. Results: As a results, the concentration of $H_2S$ ranged from 2.4 ppb to 5,889 ppb (average 703 ppb), while $CH_3SH$, $(CH_3)_2S$, and $(CH_3)_2S_2$ showed from 10 ppb to 554 ppb (average 119 ppb) and from 20 ppb to 332 ppb (average 70 ppb) and from 2.7 ppb to 8.1 ppb (average 5 ppb) individually. Average odor intensity observed in the field was degree three. Odor intensity calculated from sulfur compound concentration was confirmed as similar to the observed odor intensity because the coefficient of variance between the observed and the calculated intensities was less than one. Conclusion: It was expected that the results of this study will be helpful to design a deodorizing device to reduce odor emissions from sewerage facilities in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.3
• /
• pp.329-332
• /
• 1997

A study on the conception rate of 885 cows and heifers bred under artificial insemination (AI) and natural service was carried out at AI sub-centers. A high conception rate was observed at first service in all breeding methods. It was revealed that the conception rates in AI with liquid semen (LS) were found to be 25.08, 18.58, 12.69, and 2.48% after 1, 2, 3 and 4 services, respectively. Inseminations of cattle with frozen semen (FS) were found to achieve 42.15, 14.46, 5.85, and 2.46% conception rates after 1, 2, 3, and 4 services, respectively. In natural service, conception rates were found to be 62.45, 6.75, 5.91, and 4.64%, respectively, after 1, 2, 3, and 4 services. Insemination of cows and heifers at mid-cycle had significantly (p < 0.05) higher conception rate as compared to early and late cycles. The existing AI machineries and breeding management need to be improved to achieve higher conception rate of dairy cattle under AI.

• Preventive Nutrition and Food Science
• /
• v.11 no.4
• /
• pp.328-332
• /
• 2006

Baikseolgi was made with Kugija powder with the intention to take advantage of its functional properties. Appropriate amount of Kugija powder (0$\sim$8%) was mixed with rice flour, sugar, salt, and water and then, steamed for predetermined time and their physicochemical and sensory properties were measured. pH decreased significantly while titratable acidity increased significantly with the addition of Kugija (p<0.05). The addition of Kugija powder did not significantly affect the moisture content (p>0.05) although it appeared to decrease with the higher amount of Kugija. Lightness (L-value) decreased significantly with the addition of Kugija (p<0.05), indicating that the color of Baikseolgi became dark as also indicated by the visual observation. Redness (a-value) and yellowness (b-value), on the other hand, increased significantly as the amount of Kugija increased in the sample (p<0.05). Both hardness and firmness decreased significantly with the addition of Kugija (p<0.05). Eight percentage Kugija Baikseolgi was significantly stronger in Kugija flavor (7.9), chewiness (6.1), sweetness (5.0), and yellowness (8.2) attributes than other samples, whereas control was significantly higher in mouthfeel (6.0) and hardness (6.0) attributes than others (p<0.05). Finally, consumer test indicated that 4% Kugija sample received the highest score in appearance (8.13) and overall acceptability (8.07) attributes.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.4
• /
• pp.5-10
• /
• 2014

It is possible for the nation's largest flowmeter calibration system in K-water to calibrate flow rate up to $2,700m^3/h$ and diameter 800mm. However, the calibration and measurement capability of K-water's system is not satisfied in comparison with other developed countries. In this study, we find the dominant factors related to the uncertainty of weight and time measurement for gravimetric flowmeter calibration system. As a results of improving the system, the combined standard uncertainty has been improved $1.099{\times}10^{-3}$ to $2.332{\times}10^{-4}$. So calibration and measurement capability got 0.08 percent of the relative expanded uncertainty for maximum flow rate using the coverage factor(k=2).

• Journal of Life Science
• /
• v.10 no.4
• /
• pp.326-332
• /
• 2000

In order to investigate the possibility of functional property improvement of meat products, four kinds of pork patties were prepared with water 10% as control, mugwort extract 10%, pine needle extract 10% and fatsia leaf extract 10%, respectively. In case of control moisture content was higher, but crude fat was lower, compared to patties treated with plant extracts. Crude ash content of pine needle extract treatment showed higher level than that of other patties. pH range of patties revealed to 5.92∼5.978. In raw patties Hunter's L-and a-value of control were higher than those of plant extract treatment, and a-value of raw patties showed higher level than that of cooked. Yield, water holding capacity, salt soluble protein extractability and gel strength among patties did not show significant differences. In control patty, fat retention was lower compared to other plant extract treatments, but water soluble protein extractability was higher compared to pine needle. Values such as hardness, springiness, cohesiveness, gumminess and chewiness were not significantly different among the patties. In sensory scores such as aroma, juiciness and palatability, significant differences were not observed among cooked patties, but texture score was higher in the order pine needle, mugwort, fatsia leaf and control.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.4
• /
• pp.327-332
• /
• 1994

Optimum conditions for the production of acetoin and ammonia as the precursors of tetramethylpyrazine(TMP) were determined using Lactococcus lactis subsp. lactis biovar. diacetylactis FC1 in a modified Lactose-citrate broth containing galactose, citrate, and arginine. The cell growth and the productivity of acetoin and ammonia were remarkably increased in an aerobic culture with 10 $\mu M$ of hematin. For the optimum conditions of acetoin and ammonia production, the concentration of citrate and arginine were adjusted to 156 mM and 50 mM after 18 hr cultivation, and citrate and galactose to 156 mM and 50 mM after 36 hr cultivation, respectively. In these conditions, acetoin and ammonia were produced to the final concentration of 127 mM and 195 mM, which were the highest concentations, respectively. The optimum conditions of the TMP production were also determined as follows; 4 hours at 121, pH 8.3, and the maximal yield of TMP under these conditions was 0.81 g/l.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.4
• /
• pp.328-332
• /
• 2011

The formation of front metal contact silicon solar cells is required for low cost, low contact resistance to silicon surface. One of the front metal contacts is Ni/Cu plating that it is available to simply and inexpensive production to apply mass production. Ni is shown to be a suitable barrier to Cu diffusion into the silicon. The process of Ni electroless plating on front silicon surface is performed using a chemical bath. Additives and buffer agents such as ammonium chloride is added to maintain the stability and pH control of the bath. Ni deposition rate is found to vary with temperature, time, utilization of bath. The experimental result shown that Ni layer by SEM (scanning electron microscopy) and EDX analysis. Finally, plated Ni/Cu contact solar cell result in an efficiency of 17.69% on $2{\times}2\;cm^2$, Cz wafer.

• Journal of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.327-332
• /
• 1970

A simple and convenient device for deflection-type direct reading the variations in electrolytic conductance is described and applied to the analysis of sulfur by combustion-$H_2O_2$ oxidation method. The apparatus consisted of a high resistance-ratio bridge in which the other adjacent arms are the differential cells. By adopting unusually high a-c voltage source for the bridge excitation, the a-c method for unbalanced bridge is established, decreased sensitivity owing to reduced bridge factor, 0.01, is overcome and also the absolute sensitivity and linearity are greatly improved. Over 50% variations in impedance of the balanced cell, within 1% deviation from the linearity can be attained with a volt (rms)order of output which was detected directly with VTVM without further amplification. Analysis of the bridge shows that these useful features are natural result of the constant current character of the high source impedance generator and the performance of the device agreed with the theoretical predictions. A standard procedure for the rapid analysis of sulfur using the bridge is also given, the analytical accuracy was approximately 1%. A determination takes not more than 5 minutes.

• Preventive Nutrition and Food Science
• /
• v.19 no.4
• /
• pp.327-332
• /
• 2014

The purpose of the current study was to determine the effects of the introduction of polysaccharide chains onto the molecular surface of buckwheat proteins on buckwheat protein surface functionality. The whole buckwheat protein fraction (WBP) was prepared using 50 mM phosphate buffer (pH 7.5) containing 0.5 M NaCl and covalently linked with 6 kDa, 17.5 kDa, 40 kDa, 70 kDa, or 200 kDa dextran by Maillard-type glycation through controlled dry-heating at $60^{\circ}C$ and 79% relative humidity for two weeks. Conjugation with 40 kDa dextran improved the water solubility and emulsifying properties of WBP without causing a serious loss of available lysine; 84.9% of the free amino groups were conserved. In addition, we found that the introduction of dextran chains onto the molecular surfaces of WBP attenuated the antigenicity of WBP.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.329-332
• /
• 2005

In this paper, we describe implementation of personal media gateway (PMG) for applications over BcN networks. PMG is a TV based set-top terminal, which enables transmission of Full D1 high quality video and audio at the speed of maximum 2Mbps. It supports SIP protocol and QoS for the BcN networks. The hardware of the PMG consists of host module, audio/video codec processing module, DTMF module, and remote control I/O module. H.263 and MPEG4 software are implemented in DSP as codec for hi-directional communication and streaming, respectively. G.711 and Ogg-Vorbis are implemented as audio codec. We examined the quality of video using the Video Quality Test Equpment, which was developed by KT Convergence Lab. The experimental results show the video quality of MOS 4.1 and audio quality of MOS 4.3. We expect that PMG will be prospective business models, and create new customer value.