• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.1
• /
• pp.21-29
• /
• 1994

Subzonal insemination(SUZI) has been proposed for patients with severe male factor and previous fertilization failure. However, very low fertilization rates still persisted. The aims of this study were firstly, to examine the relationships between the fertilization rate and sperm parmeters, sperm incubation media and time, secondly, to evaluate the outcome of 119 cycles of SUZI applied the modified sperm preparation method. The fertilization rates were influenced more sensitively by sperm preincubation media and time than by sperm parameters. According to preincubation media and time, the fertilization rates were 43.3% in 50% follicular fluid (HFF), 36.6% in 10% fetal cord serum(FCS), and with the time, increased in FCS, but decreased in HFF. In regrd with sperm parameters, the fertilization rates were 42.9% in normal and 37.6% in subnormal group. The best results were obtained from SUZI by the spermatozoa incubated in 50% HFF for 6-8 hours. So we tried 119 cycles of SUZI(normal; 39 cycles, subnormal; 80 cycles) using the preparation method of 6-8 hour incubation in 50% HFF. There were no signigicant differences in the fertilization rates between normal(125/269, 46.4%) and subnormal sperm(264/635, 41.6%). Contrary to the fertilization rates, pregnancy outcomes were different between both groups. Better results obtained from the subnormal group than the normal in the number of transferred embryos, that of good embryos, and developmental rate of the fertilized eggs. The pregnancy rates per transfer were totally 13.3%(13/98),20.0%(13/65) in subnormal group. In the normal group, 2 patients showed ${\beta}$-hCG positive, but resulted in chemical pregnancy. Of 13 clinical pregnancies, two aborted, 6 on-going, and 5 delivered. In conclusion, SUZI is an effective technique to overcome fertilization failure for male factor and unexplained. The fertilization rate is influenced by sperm parameters, sperm incubation media and time. Also the quality of oocytes might be important for pregnancy as same as that of sperm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.259-264
• /
• 2002

In order to develope nutritional and flavoring intermediate products, the optimal processing conditions for two stage enzyme hydrolysate (TSEH) from low-utilized conger eel scrap such as head and intestine were investigated. The optimal processing conditions for TSEH were revealed in temperature at $55^{\circ}C$ 3$\~$4 hours digestion with alcalase at the 1st stage, and 4 hours at $45{\~}50^{\circ}C$ digestion with neutrase at the 2nd stage. Among water extract, steam extract and enzyme hydrolysates of conger eel scrap, the present TSEH was superior to other extracts in terms of yield ana organoleptic taste such as harmonic umami and inhibition of fishy and greasy taste formation. From the results of chemical experiments and sensory evaluation, we may conclude that TSEH of conger eel scrap could be utilized as the flavoring intermediate materials for the fisheries products such as flavoring sauces, drinkable beverage and instant food materials.

• Microbiology and Biotechnology Letters
• /
• v.45 no.3
• /
• pp.257-264
• /
• 2017

Mixed substrate oil cakes are known to emit sulfides, ammonia, and amines. Microorganisms capable of removing odorous gases related to these sulfur compounds were isolated from colonies enriched in vials containing oil cakes and water. Activity tests for hydrogen sulfide and methyl mercaptan reduction were performed to measure the sulfide reduction ratio of the isolates. Control groups were prepared with 0.25 g oil cakes and 10 ml water in a 100-ml vial without inoculation. The experimental groups were prepared similarly, albeit with an inoculum. Hydrogen sulfide removal efficiency of >90% was observed for an isolate, which was identified as Brevundimonas diminuta by 16S rDNA sequence analysis. The sequence was deposited in the Korean Collection for Type Cultures under the accession number KCTC11724BP. B. diminuta could remove up to 200 ppmv standard hydrogen sulfide in 24 hours and demonstrated a maximum hydrogen sulfide and methyl mercaptan removal efficiency of 100% at 453 ppmv and 98 ppmv, respectively, in vial tests. Furthermore, B. diminuta cells in 20% (v/w) medium showed removal efficiency of >85% for sulfur compounds in an odor emission chamber for swine manure.

• Journal of the Korean Ceramic Society
• /
• v.45 no.10
• /
• pp.618-624
• /
• 2008

Various calcium phosphate bioceramics are distinguished by their excellent biocompatibility and osteoconductivity. Especially, the exceptional biodegradability of $\beta$-TCP makes it a bone graft substitute of choice in many clinical applications. The activation of osteoclasts, differentiated from macrophage precursor cells, trigger a cell-mediated resorption mechanism that renders $\beta$-TCP biodegradable. Based on this evidence, we studied the biodegradation process of granular-type $\beta$-TCP bone graft substitute through in vitro and in vivo studies. Raw 264.7 cells treated with RANKL and M-CSF differentiated into osteoclasts with macrophage-like properties, as observed with TRAP stain. These osteoclasts were cultured with $\beta$-TCP nano powders synthesized by microwave-assisted process. We confirmed the phagocytosis of osteoclasts by observing $\beta$-TCP particles in their phagosomes via electron microscopy. No damage to the osteoclasts during phagocytosis was observed, nor did the $\beta$-TCP powders show any sign of cytotoxicity. We also observed the histological changes in subcutaneous tissues of rats implanted with granule-type $\beta$-TCP synthesized by fibrous monolithic process. The $\beta$-TCP bone graft substitute was well surrounded with fibrous tissue, and 4 months after implantation, 60% of its mass had been biodegraded. Also, histological findings via H&E stain showed a higher level of infiltration of lymphocytes as well as macrophages around the granule-type $\beta$-TCP. From the results, we have concluded that macrophages play an important role in the biodegradation process of $\beta$-TCP bone graft substitutes.

• Korean Journal of Ecology and Environment
• /
• v.46 no.2
• /
• pp.251-264
• /
• 2013

This study was conducted to investigate the diversity of ectomycorrhizal fungi by surveying sites from June 2010 to October 2011. The obtained results from investigation were as follows. The total of 2 Kingdom 3 Phylum 6 classes 15 orders 34 families 59 genera and 107 species including saprophytic and ectomycorrhizal fungi was investigated. A total of 10 families 17 genera 49 species (801 ea.) of ectomycorrhizal mushroom was investigated. The mushrooms are classified into 28 families 51 genera and 99 species in Basidiomycota, 5 families 7 genera and 7 species in Ascomycota and 1 families 1 genera and 1 species in Amoebozoa. Dorminant species were Amanitaceae (14 species) followed by Russulaceae (12 species) and Boletaceae (11 species). The populaion ectomycorrhizal mushroom was highest in sites 1 and 2, and sites 4 and 5 occurrence rarely. The mushroom occurrence of ectomycorrhizal fungi was closely related to climatic conditions such as high air temperature and lots of rainfall from July to August. The environment factors which have a favorable influence of mushroom occurrence were soil pH, organic matter content of soil and air temperature of climatic environment.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.3
• /
• pp.692-700
• /
• 2016

This study was aimed at investigating the residual patterns of thiamphenicol (TP) in the cultured olive flounder (Paralichthys olivaceus) and black rockfish (Sebastes schlegeli) following oral administration. TP concentration were detected by high performance liquid chromatography with UV detector. The recovery rates of TP in serums ranged 77.05~97.23% (olive flounder) and 89.96~97.11% (black rockfish) for the concentration of 0.1, 1.0, $10{\mu}g/mL$, respectively. After single administration of TP (100 mg/kg body weight) by oral route in olive flounder ($700{\pm}50g$, $23{\pm}1.5^{\circ}C$) and black rockfish ($500{\pm}30g$, $23{\pm}1.5^{\circ}C$), the concentration in the serum was determined at 1, 5, 10, 15, 24, 30, 50, 168, 264 and 432 h post-dose. Two-compartment model was applied to analyze in the pharmacokinetics of TP administered to the fishes. In the serum of olive flounder, TP was detected on 10 and 15 hours after treatment were $10.08{\mu}g/mL$ and $10.06{\mu}g/mL$ as maximum level, respectively. In the serum of black rockfish, TP was detected on 15 hours after treatment were $8.88{\mu}g/mL$ as maximum level. Concentrations of TP to the fishes were not measurable at 432 hours (18 days) after treatment in all samples. Similar residual patterns of TP were revealed between the fishes. These results are helpful for estimating withdrawal time of TP which has been already in use for farmed fish treatment.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.256-264
• /
• 2014

Enhancing the value of fine chemicals based on biomass resources is an important objective for addressing environmental and other concerns such as demand for renewable or green products, as well as from the political perspective to reduce dependence on fossil feedstock associated with the use of petroleum-based products. Based on these considerations, we studied the synthesis of estolide using waste plant-based oil materials and their application as lubricants and pour point depressants. Five estolides were prepared by varying molar ratio of palmitic acid (PA) to oleic acid (OA) using a reaction time of 48 h. The estolides were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR). The isolated yields were in the range of 57-78 % and purity was 93-97%, showing iodine values of 18.2-37.8, total acid numbers (TANs) of 75.6-94.2 mg KOH/g and estolide numbers (ENs) of 1.2-1.8. Increasing the ratio of OA to PA in the synthesis decreased the kinematic viscosity and clouding point of the estolides. Four ball wear test of the estolides as a base oil demonstrated that the wear scar diameter (WSD) of the estolides was significantly lower (0.320-0.495 mm) than the WSD of general base oils such as 150N and Yubase (0.735 and 0.810 mm, respectively), indicating better wear resistance of the estolides. However, the lubricant property was found to be independent of the amount of OA in the estolides. These new materials are prospective candidates for application as a lubricant base oil.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.69-76
• /
• 2010

This paper proposed a new fast multi-reference frame motion estimation algorithm. The proposed algorithm reduces search areas of motion estimation using a linear relation of motion vector with distance of each reference frame. New algorithm executes full search area motion estimation in reference frame 0 and reference frame 1. After that, search areas in reference frame 2, reference frame 3 and reference frame 4 are minimized by distance of each reference frame and results of motion estimation in reference frame 0 and reference frame 1. The proposed algorithm does not use a threshold value which is obstacle of hardware implementation and processing time schedule. Also, it reduced computation quantity of multi-reference motion estimation. Hardware implementation of multi-reference frame motion estimation is possible by these features. Simulation results show that PSNR drop and bitrate increase of proposed algorithm are lower than those of previous fast multi-reference frame motion estimation algorithm The number of computation of new algorithm is reduced 52.5% and quality of result is negligible when compared with full search area motion estimation which has 5 reference frames.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.82-92
• /
• 2008

Recently, many digital signal processing(DSP) applications such as H.264, CDMA and MP3 are predominant tasks for modern high-performance portable devices. These applications are generally computation-intensive, and therefore, require quite complicated accelerator units to improve performance. Designing such specialized, yet fixed DSP accelerators takes lots of effort. Therefore, DSPs with multiple accelerators often have a very poor time-to-market and an unacceptable area overhead. To avoid such long time-to-market and high-area overhead, dynamically reconfigurable DSP architectures have attracted a lot of attention lately. Dynamically reconfigurable DSPs typically employ a multi-functional DSP accelerator which executes similar, yet different multiple kinds of computations for DSP applications. With this type of dynamically reconfigurable DSP accelerators, the time to market reduces significantly. However, integrating multiple functionalities into a single IP often results in excessive control and area overhead. Therefore, delay and power consumption often turn out to be quite excessive. In this thesis, to reduce power consumption of dynamically reconfigurable IPs, we propose a novel fine-grained clock gating scheme, and to reduce size of dynamically reconfigurable IPs, we propose a compact multiplier-less multiplication unit where shifters and adders carry out constant multiplications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.9
• /
• pp.1233-1237
• /
• 2001

A study was conducted to determine the effects of maturity at harvest and wilting days on the quality of round baled rye (Secale cereale L.) silage. This study was a $3{\times}3$ factorial arrangement in a split plot design with 3 replicates. The main plot was 3 harvesting dates at the stage of boot (20 Apr.), heading (29 Apr.) and flowering (14 May). The subplot was wilting day : 0 (unwilted), 0.5 and 1 day (0, 1, and 2 days at boot stage). Acid detergent fiber (ADF) and neutral detergent fiber (NDF) contents of rye silage were significantly greater than those of rye before ensiling, but crude protein (CP) content and in vitro dry matter digestibility (IVDMD) were vice versa. Buffering capacity (BC) of rye harvested at flowering stage was decreased from 264 to 202 meq/kg at 1 day wilting, however, it was increased when harvested at boot or heading stage. The pH in wilted silage was the highest while that of flowering stage was the lowest. Water soluble carbohydrate (WSC) content of wilting rye was lower than that of unwilted, and the lowest at late harvesting stage. All plots had minimal WSC content for silage fermentation. Wilting treatment and delayed harvesting date caused an increase in dry matter (DM) content of round bale silage. The content of ammonia-N expressed as a portion of total N showed negative correlation with DM content. High quality silage according to ammonia-N content could be obtained from mid-harvest with wilting. There were highly significant differences in each organic acid between harvesting dates and wilting periods. Acetic and butyric acid contents were increased with delayed harvesting and prolonged wilting period, the lactic acid content, however, was decreased. This study demonstrated that harvest of rye from heading to flowering stage with wilting would be a recommendable method for making high quality rye silage using round bale system.