• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.178-183
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 and 5052-H32 aluminum alloys for variable load within tensile load range condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure are investgated by compliance method. The applied initial stress ratio is R=0.3 and variable load are R=0.65, 0.46. Crack length, stress intensity factor range, ratio of effective stress intensity factor range and crack growth rate etc. are inspected with fracture mechanics estimate.

• 전기의세계
• /
• 제19권6호
• /
• pp.8-12
• /
• 1970

A Device is described which intensity modulates a light beam at modulating frequency in the M/W region. A Method of designing a practical crystalline microwave-Freg. light modulator has been described. In addition, Electrooptic properties and operation as light modulator of NH$_{4}$H$_{2}$po$_{4}$ is described. A light path is provided through the crystal into a suitably oriented analyzer. The intensity of the light beam emerging from the latter varies at the same rate as the cavity frequency.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.834-842
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 and 5052-H32 aluminum alloy under high-low block loading condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure ae investigated by compliance method. The applied stress ratios are R=0.15, 0.0, -0.15 and R=-0.15, 0.0, 0.15. The crack growth rate was found to increase as the load amplitude increases. However,${\bigtriangleup}K_eff$ was almost independent on the stress ratio. The experimental constants of 7075-T651 and 5052-H32 in Paris law were c`=1-1.3${\times}{10^-7},m`=3~3.2 and c`=4~6{\times}{10^-9}, m`=4.3-4.8$, respectively. $K_op$ of 7075-T651 and 5052-H32 becomes smaller as the stress ratio decreases. It seems that the crack closure affects $K_op$.

• 한국강구조학회 논문집
• /
• 제18권3호
• /
• pp.385-393
• /
• 2006

목구조의 효율적인 이용은 건설산업에 있어 자재생산에 따른 에너지의 대량소비 및 폐기물유발을 감소할 수 있어 친환경적인대응방안으로 주목받고 있다. 이러한 친환경적인 목재의 수요를 증대시키기 위해서는 중 대형 목구조를 필요로 하는데 기존의 단일부재 및 접합부로써 중 대형 목구조를 실현하는 데는 한계가 있다. 그러므로 중 대형 목구조의 가능성을 높이기 위해서는 구조용집성재의 사용 및 다른 재료를 병합한 효율적인 접합방법이 필요로 하게 된다. 본 연구는 중 대형 목구조용 2방향 라멘접합부 개발을 목표로 하여 H형강과 구조용집성재를 사용한 플랜지의 두께(None, 6mm, 9mm, 12mm)이며, 접합부의 휨 실험을 통해 강성, 강도, 구조용집성재의 응력분포, H형강 플랜지의 변형도 및 파괴형상을 파악하였다. 실험결과, H 형강의 플랜지 두께가 9mm, 12mmm인 실험체는 높은 강도와 우수한 변형능력을 발휘하였다. 또한 H 형강의 플랜지 두께가 9mm, 12mm인 실험체의 이력거동은 매우 크고 매우 높은 에너지 흡수능력을 가지고 있었다.

• 토지주택연구
• /
• 제3권4호
• /
• pp.433-449
• /
• 2012

횡력을 받는 넓은 보와 기둥 내부접합부의 거동을 평가하기 위하여 넓은 보-기둥 접합부의 휨강성비와 유효폭 및 슬래브 유무를 변수로 6개의 1/2축소 모델 실험체를 제작하여 구조성능 평가를 수행하여 하중-변형, 연성, 강성 등을 평가하였다. 동 모델을 대상으로 비탄성해석을 수행하여 구조성능평가 결과와 비교하였다. 연구결과 도출된 결론은 다음과 같다. 넓은 보-기둥 내부 접합부는 중진지역인 국내에서 적용하고 있는 부분골조형 구조에 적용이 가능한 것으로 판단된다. 슬래브의 강성이 횡력을 받는 넓은 보-기둥 내부 접합부의 거동에 영향을 미치는 것으로 나타났다. 휨강성비가 2.0이상의 경우 T형보의 플랜지로서 슬래브 유효폭은 넓은 보 유효깊이의 2.0d로 평가되며, 휨강성비가 1.4~2.0일 경우, 슬래브 유효폭의 영향은 고려하지 않아도 되는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제4권4호
• /
• pp.429-449
• /
• 2013

Current Design Codes for Reinforced Concrete (RC) interior beam-column joints are based on limited experimental studies on the seismic behavior of eccentric joints. To supplement existing information, an experimental study was conducted that focused on the effect of eccentricity of the deeper beams with respect to the shallow beams. A total of eight one-third scale interior joints with beams of different depths were subjected to reverse cyclic loading. The primary variables in the test specimens were the amount of joint transverse reinforcement and the cross section of the shallow beams. The overall performance of each test assembly was found to be unsatisfactory in terms of joint shear strength, stiffness, energy dissipation and shear deformation. The results indicated that the vertical eccentricity of spandrel beams in this type of joint led to lower capacity in joint shear strength and severe damage of concrete in the joint core. Increasing the joint shear reinforcement was not effective to alter the failure mode from joint shear failure to beam yielding which is favorable for earthquake resistance design, whereas it was effective to reduce the crack width at the small loading stages. Based on the observed behavior, the shear stress of the joint core was suggested to be kept as low as possible for a safe and practical design of this type of joint.

• 대한조선학회논문집
• /
• 제37권3호
• /
• pp.45-56
• /
• 2000

규칙파중 상자형 부유식 방파제의 특성을 살펴보기 위하여 실험과 이론 연구를 수행하였다. 선형포텐셜이론으로 부유식방파제의 특성을 잘 해석할 수 있음을 확인하였다. 투과계수는 파장/부체폭과 부체폭/부체흘수의 비의 함수이며 최소 투과계수가 나타나는 점이 있음을 확인하였다. 부체폭/부체흘수 비가 클수록 최소 투과계수를 가지는 파장/부체폭의 값이 커지며, 과도한 계류력은 부유식방파제의성능을 저하시킬 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.659-661
• /
• 1989

$CO_2$ laser beam was focused a ZnSe lens onto the center of the occlusal surface of extracted lower molars. K-type thermocouple was contacted with the pulp chamber and the changes of temperature in the pulp chamber during and after the laser irradiation were measured as function of the power of laser beam, the time of laser irradiation and thickness of the sample. An empirical formula for temperature effect was derived from the measured data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.305-310
• /
• 2013

This paper analyzes three cantilever-types of piezoelectric actuators of bimorph, unimorph and monomorph in same volume to maximize tip displacement. Tip displacement of each actuator is theoretically derived by using beam theory and numerically verified by FEM. It also investigates the tip displacements of each actuator due to the change of elastic layer. It shows that the piezoelectric actuator of bimorph generates the largest tip displacement among them.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.59-63
• /
• 2005

Nowadays, various approaches are performed to increase the storage capacity of optical storage device. One of the promising candidates is using the high NA lens. By using high NA lens, the beam spot size can be reduced which will lead to increase the storage density. This paper proposes a double cantilever beam type bimorph PZT actuator for fine motion that can control the gap between the flexible media and optical pickup which uses high NA lens. Mathematical model is derived by using Hamilton's principle and the model is verified by finite element analysis and experiment. Position controller is designed and its performance is evaluated by experiment.