• 제목/요약/키워드: H-continuous

검색결과 2,159건 처리시간 0.036초

연작년수(連作年數)가 고추, 참깨 및 땅콩의 수량(收量)과 토양미생물상(土壤微生物相)에 미치는 영향(影響) (Effects of the continuous cultivating years of the hot-pepper, sesame and peanut on yields and soil microorganism)

  • 정지호;전장협;김희권;박건호
    • 한국토양비료학회지
    • /
    • 제22권1호
    • /
    • pp.67-71
    • /
    • 1989
  • 소득작물(所得作物)의 연작년수(連作年數)가 수량(收量) 및 토양미생물상(土壤微生物相)에 미치는 영향(影響)을 검토(檢討)하기 위하여 '85年부터 '88년(年)까지 고추, 참깨, 땅콩에 대(對)하여 시험(試驗)을 수행(遂行)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 토양(土壤) pH는 연작년수(連作年數)가 증가(增加)함에 따라 0.1~0.9정도(程度)까지 낮아졌고 토양경도(土壤硬度)나 가비중(假比重)은 증가(增加)하였다. 2. 연작년수(連作年數)가 증가(增加)함에 따라 이병률(罹病率)은 증가(增加)하였으며 선충수 사년연작구(四年漣作區)에서 고추 880, 참깨 890, 땅콩 912 마리였다. 3. 세균(細菌)/사상균률(絲狀菌率)은 연작(連作)할수록 낮아져서 사년연작구(四年連作區)에서 고추 29.6, 참깨 30.7, 땅콩 12.0이었다. 4. 수량(收量)은 1년작(年作)에 비(比)하여 사년연작구(四年連作區)에서 고추 39%, 참깨 33%, 땅콩 23% 감소(減少)하였다.

  • PDF

Streptococcus zooepidemicus 유래 히알루론산의 경제적 생산을 위한 연속배양 공정 개발 (Development of Continuous Culture Process for Economic Production of Hyaluronic Acid (HA) Biosynthesized by Streptococcus zooepidemicus)

  • 김수연;전계택
    • 한국미생물·생명공학회지
    • /
    • 제48권4호
    • /
    • pp.525-532
    • /
    • 2020
  • 본 연구에서는 히아루론산(Hyaluronic acid) (HA)의 시간당 부피생산성(g/l/h)을 증가시키기 위해, 이전의 회분식 배양결과를 바탕으로 S. zooepidemicus를 이용한 연속식 배양공정을 개발하고자 하였다. 약 8시간까지 회분식으로 발효조를 운영한 후, 0.029/h의 희석속도(D1)로 48시간까지 1단계 연속배양을, 그 후 약 96시간까지 0.036/h의 희석속도(D2)로 최종 2단계 연속배양을 수행하였다. 회분식 배양 말기에 HA의 생산량은 3.85 g/l이었으며, 1단계 연속배양 기간 동안에는 7.5-10 g/l(건조 HA인 경우는 13.39-14.2 g/l)의 농도로 생산되었다. 계속된 2단계 연속배양에서는, 희석속도의 증가로 인해, 초반에 잠시 HA 생산성이 8.28 g/l (건조 HA인 경우는 11.63 g/l)까지 감소하다가, 서서히 증가하면서 다시 새로운 정상상태로 접근해 가는 현상을 관찰할 수 있었다. 2단계 연속배양에서의 HA 생산량은 약 8.28-9.48 g/l (건조 HA의 경우는 11.0-13.37 g/l) (1단계 연속배양 대비 약 4.7% 소량 감소)로서, 배양 종료까지 비교적 안정적으로 유지되는 것으로 나타났다. 그렇지만 HA의 부피생산성(DP)(= 희석속도 × HA 생산농도)(g/l/h)은 희석속도를 D1에서 D2로 약 24% 증가시킨 결과. 2단계 기간인 배양 약 96시간 경에 최대 0.341 g/l/h에 이르는 것으로 관찰되었는데, 이는 대조군으로 수행한 회분식 배양의 평균 부피생산성(0.331 g/l/h)에 비해 3% 가량 소량 증가된 수치이다. 하지만, 연속배양 공정의 경우, 회분식 배양에서는 반드시 요구되는 다단계의 성장배양 단계를 진행하지 않고도, 최종 생산배양 공정만을 연속적으로 수행할 수 있으므로, 회분식 배양공정의 전체 배양시간(즉 다단계 성장발효조 배양 기간 + 최종 생산발효조 배양 기간)을 기준으로 비교한다면, 연속배양의 HA의 부피생산성이 회분식배양 대비 큰 폭으로 향상될 수 있을 것으로 판단된다. 한편 본 연속배양 연구에서 사용한 생산배지는 회분식 배양에서 생산균주의 배양생리적 특성에 맞추어서 최적화된 배지임을 고려할 때, 연속배양 공정에 적용될 수 있는 최적배지가 개발된다면, 장기간 생산 안정성을 유지하면서 동시에 부피생산성도 증가하는, 경제적인 연속배양 공정이 개발될 수 있을 것으로 기대된다.

Rotifer 반 연속 고밀도. 배양에 있어서 담수산 rotifer, Brachionus calyciflorus와 해수산 rotifer, B. rotundiformis의 생산성 (Productivity of freshwater Rotifer, Brachionus calyciflorus and Marine Rotifer, B. rotundiformis in the Semi-continuous High Density Culture)

  • 이균우;박흠기;조성환
    • 한국수산과학회지
    • /
    • 제34권2호
    • /
    • pp.156-159
    • /
    • 2001
  • 본 연구는 반 연속 rotifer 고밀도 배양에 있어서 배양 수온, 초기 접종밀도 및 pH조절에 따른 담수산 rotifer, Brachionus calyciflorus와 해수산 rotifer, B. rotundifomis의 생산성을 비교 조사하였다. 실험은 6L 배양용기 (배양수 5L)에 담수산 농축 Chlorella를 먹이로 공급하였다. pH를 조절하지 않은 반 연속 rotifer 고밀도 배양에서 B. calyciflorus와 B. rotundifomis의 일일 평균 생산량은 수온이 높을수록 높게 나타났고 수온 $32^{\circ}C$ 실험구에서 B. calyciflorus가 일일 $44\times10^6$개체로 가장 높은 생산량을 보였다 (P<0.05). 또한 이들의 생산 기간은 B. calyciflorus가 B. rotundiformis보다 상당히 길게 나타났다. 한편 pH를 7로 조절하면서 B. calyciflorus와 B. rotundiformis의 초기 접종밀도를 5,000개체/mL로 할 경우, 생산 기간이 각각 12일과 11일로 초기 접종밀도 10,000개체/mL의 2일과 8일 보다 길게 나타났고, 생산률도 $130\%$로 높게 나타났다. 본 연구를 종합하여 볼 때, B. calyciflorus와 B. rotundiformis의 반 연속 고밀도 배양에 있어서 생산 효율과 먹이 비용을 고려할 때 $32^{\circ}C$에서 pH 7 조절 하에 초기 접종밀도를 5,000개체/mL로 하는 것이 가장 효과적이고 안정적인 반 연속 rotifer 고밀도 배양이 될 것으로 판단된다.

  • PDF

Multi-h CPM의 차동 검파에 관한 연구 (A Study on the Differential Detection of Multi-h Continuous Phase Modulation)

  • 홍희식;한영열
    • 전자공학회논문지A
    • /
    • 제29A권3호
    • /
    • pp.8-14
    • /
    • 1992
  • In this paper, the differential detection technique of multi-h CPM is introduced and described. We derived the sets of modulation index of multi-h phase codes adequate to the differential detection. The power spectra of multi-h signals with various sets of modulation index are presented and compared to those of MSK and QPSK. Error rate performances of the conventional detector and Viterbi algorithm detector of 2-h and 3-h CPM are evaluated and compared.

  • PDF

Continuous Production of Pullulan by Aureobasidium pullulans HP-2001 with Feeding of High Concentration of Sucrose

  • Seo Hyung-Phil;Jo Kang-Ik;Son Chang-Woo;Yang Jae-Kyoon;Chung Chung-Han;Nam Soo-Wan;Kim Sung-Koo;Lee Jin-Woo
    • Journal of Microbiology and Biotechnology
    • /
    • 제16권3호
    • /
    • pp.374-380
    • /
    • 2006
  • In this study, glucose, sucrose, and dextrin were found to be better carbon sources for the production of pullulan by Aureobasidium pullulans HP-2001. Maximal production of pullulan with 200 g/l sucrose as a carbon source was 54.2 g/l. The highest yield of pullulan from sucrose was 0.40, when the sugar concentration was 100 g/1. Optimal conditions for the continuous production of pullulan by A. pullulans HP-2001 in a 7-1 bioreactor were determined by studying the effects of composition of feed solution, dilution rate, and concentration of sucrose in the feed solution. Pullulan concentration and productivity with 100 g/l glucose and 2.5 g/l yeast extract were 38.1 g/l and 0.53 g/l h for 72 h, respectively, in a batch culture of A. pullulans HP-2001. When the substituted medium contained 100 g/l sucrose, 2.5 g/l yeast extract, and mineral salts, which is the same composition as the medium for the production of pullulan, the pullulan concentration and productivity were 74.9 g/l and 0.55 g/l h for 120 h, respectively. The production of pullulan at the steady state increased with a dilution rate up to 0.015/h, and its concentration was 78.4 g/l with a weight average molecular weight ($M_w$) of $4.0{\times}10^5$. Unlike a batch culture, however, the decline of the $M_w$ and the number average molecular weight ($M_n$) of pullulan was not found in the continuous culture of A. pullulans HP-2001. When the concentration of sucrose in the feed solution was 200 g/l, 113.5 g/l of pullulan was obtained at the steady state. The steady state was maintained longer in the continuous culture fed with the feed solution containing 200 g/l sucrose than when fed with the feed solutions containing either 100 or 150 g/l sucrose.

두 탑 PSA공정의 상세 동적모사 및 초기운전조건 결정 (Rigorous dynamic simulation and determination of initial operating conditions for two-bed PSA processes)

  • 황덕재;문일
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
    • /
    • pp.1520-1523
    • /
    • 1997
  • A rigorous dynamic simulation was performed in binary gas mixture H$_{2}$/CO (70:30 vol.%) to determinate start-up operating conditions of PSA(Pressure Swing Adsorption) processes. The rigorous dynamic model for the PSA process contains an Ergun equation for expressing the pressure drop in a bed, and valve equations to compute the boundary pressure change of the bed. As the result of the continuous dynamic simulation of 100 operating cyles in various initial conditions, the unsteady-state appeared in the early period and the cyclic steady-state came out about 20th cycle in feed condition and vaccum condition, and 30th cycle in pure H$_{2}$ condition. As time goes by valve equations made change the pressure at each end of the bed in ressurization, countercurrunt-depressurization and pressure equalization steps. The H$_{2}$ purity and the recovery is 99.99% and 86.73% respectively, which is slightly higher than the experimental data. Main contributiion of this study includes supplying fundamental technologies of handling combined variables PSA processes by developing rigorous models.

  • PDF

LOCAL CONVERGENCE OF THE SECANT METHOD UPPER $H{\ddot{O}}LDER$ CONTINUOUS DIVIDED DIFFERENCES

  • Argyros, Ioannis K.
    • East Asian mathematical journal
    • /
    • 제24권1호
    • /
    • pp.21-25
    • /
    • 2008
  • The semilocal convergence of the secant method under $H{\ddot{o}}lder$ continuous divided differences in a Banach space setting for solving nonlinear equations has been examined by us in [3]. The local convergence was recently examined in [4]. Motivated by optimization considerations and using the same hypotheses but more precise estimates than in [4] we provide a local convergence analysis with the following advantages: larger radius of convergence and finer error estimates on the distances involved. The results can be used for projection methods, to develop the cheapest possible mesh refinement strategies and to solve equations involving autonomous differential equations [1], [4], [7], [8].

  • PDF