• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.130-140
• /
• 1997

원형주상체 주위의 유동을 규명하기 위해 회류수조에서 원주방향으로 24개의 위치에 대하여 압력을 계측하였으며, laser sheet을 이용하여 유동을 가시화 하였다. Reynolds수가 4800에서 40000인 범위에 대하여 실험을 수행하였다. 또한, 원형단면체 주위의 비정상 층류유동에 대한 Navier-Stokes방정식의 해를 구하는 수치해석기법을 개발하였다. 효과적인 격자배치를 위하여 H와 O-type의 중첩격자를 사용하였고, 이산화 방법으로는 정규격자시스템에서 유한차분법을 적용하였다. 실험과 수치해석결과에서 뚜렷한 와류박리현상을 볼 수 있었으며, 압력계수 (C$_{p}$ ), 항력계수(C$_{D}$), 스트로얼수(St)를 정량적으로 비교하였을 때, 비교적 잘 일치하는 것을 확인하였다.다.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1910-1912
• /
• 1996

This paper presents the results of laboratory experimentals to remove $SO_2$ and $NO_x$ by a pulsed corona discharge in the wire-plate reactor. A rotating spark gap switch was used to generate the pulse by chewing the dc high voltage. Repetition frequency of the pulse was 60Hz and rising time of 50ns. The photo pictures of positive streamer corona taken by ICCD camera, pulse voltage and current were measured using a digital oscilloscope. Simultaneous effects of $C_{2}H_{4}$ injection and heterogeneous chemical reactions on nonthermal plasma process to remove $SO_2$ and $NO_x$ from flue gas were investigated in the present study

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1773-1775
• /
• 1998

This paper deals with the pulse generator using PFN(Pulse Forming Network), and its operation characteristics and application. Two kinds of pulse generator were composed of the best appropriate condition circuit. The output current of the one pulse generator has the rise time of 28 ns and the pulse duration of $7{\mu}s$. The other pulse generator has high current of about 2kA. By use of the former generator with rapid rise time, the impulse impedance characteristic of ground electrodes was investigated with measuring the ground potential rise when the pulse current was injected into the ground electrode.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.62-67
• /
• 2010

In this paper, an ultra-wideband internal antenna for use in mobile applications is proposed. The proposed antenna has symmetrical bi-arm structures printed on the top and bottom of the substrate, and it occupies a compact area of 10 mm ${\times}$ 10 mm ${\times}$ 1 mm. The designed antenna has an impedance bandwidth from 3 GHz to 12 GHz and near omnidirectional radiation patterns over the frequency band of interest. The group delay between two antennas fabricated using the proposed design is less than 0.8 ns, and the maximum gain variation is about 3.16 dB.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1864-1866
• /
• 1996

Grounding is the art of making an electrical connection to the earth. In order to protect man, electrical and/or electric equipments from the lightning strokes, all the energy of lightning strokes must be diverted via a safe path to earth. It is essential to the transient grounding resistance against lightning strokes. In this paper, measurements and analyses of grounding surge impedance have been investigated. For measurements of grounding surge impedance the pulse generator was designed and fabricated. The pulse generator has rise time of 22.4 ns and pulse duration of $8\;{\mu}s$. The transient grounding resistance has been measuring by injecting low power and step current between the earthing system under test and a remote reference earth and measuring the potential rise caused by this current. As a result, the transient grounding resistance against lightning surge in the short time domain is much higher than steady state grounding resistance.

• Laser Solutions
• /
• v.14 no.1
• /
• pp.19-24
• /
• 2011

This work reports the results for laser shock peening of duplex stainless steel (22% Chromium - 5% Nickel) using a pulsed Nd:YAG laser (wavelength = 532nm, pulse width = 8ns). for the application to high-capacity pumps for seawater desalination plants. By properly selecting the process parameters such as laser intensity of 10GW/$cm^2$, laser pulse density of 75pulse/$mm^2$, and $100{\mu}m$ thick aluminum foil as an absorbent coating layer, the surface hardness of duplex stainless steel could be enhanced by 26%, from 256HV to 323HV with little changes in surface morphology and roughness. The depth of laser shock peened layer was measured to be around 2mm. The large enhancement of surface hardness is considered to have high practical importance in minimizing abrasive and corrosive deterioration of pump parts.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.12
• /
• pp.1769-1772
• /
• 2002

Previous $^{19}F\;and\;^{1,2}H$ electron-nuclear double resonance (ENDOR) study of fluorometmyoglobin (MbF) in frozen-solution state provided sensitive tools sensing subtle structural changes of the heme that are not obtainable from X-ray. [Fann et al., J. Am. Chem. Soc. 1995, 117, 6019] Because of the intrinsic inhomogeneouse EPR line broadening effect of MbF in frozen-solution state, detection of the intrinsic inhomogeneouse EPR line broadening effect of MbF in frozen-solution state, detection of the electronic and geometrical changes of the heme ring itself and the proximal histidine by using $^{14}N$ CW ENDOR was interfered. In the present study, hyperfine-sensitive $^{14}N$ Mims ENDOR technique of pulsed-EPR was employed to probe the changes. With two different $\tau$ values of 128 and 196 ns, $^{14}N$ ENDOR signals of the heme and proximal histidine were completely resolved at $g'_{II}(=g_e=2)$. This study present that X-band $^{14}N$ Mims ENDOR sequence can sensitively detect the small changes of the spin densities and p orbital populations of the proximal and the heme nitrogens, caused by ligand and pH variation of the distal site.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.3
• /
• pp.189-196
• /
• 1989

In this paper, BICMOS gate array technology that has CMOS devices for logic applications and bipolar devices for driver applications is presented. An optimized poly gate p-well CMOS process is chosen to fabricate the BICMOS gate array system and the basic concepts to design these devices are to improve the characteristics of bipolar & CMOS device with simple process technology. As the results hFE value is 120(Ic=1mA) for transistor, and there is no short channel effects for CMOS devices which have Leff to 1.25um and 1.35um for n-channel, respectively, 0.8nx gate delay time of 41 stage ring oscillators is obtained.

• Journal of Oriental Neuropsychiatry
• /
• v.16 no.1
• /
• pp.19-41
• /
• 2005

Object : This study was designed to asses the effect of Sunghyangjungkisan-ga-pogongng and herbs on Mouse neuroblastoma 2a cells damaged by hypoxia-reoxygenation. Method : Mouse neuroblastoma 2a (N2a) cells were measured by MTT assay and LDH assay after 48h hypoxia and 6h reoxygenation, Mouse neuroblastoma 2a (N2a) cells were treated by SHJG+P and herbs. Result : 1. SHJG+P was effective on LDH assay of hypoxia and reoxygenation. 2. The herbs were generally effective on LDH assay of hypoxia and reoxygenation. In MTT assay of hypoxia JP and GC were effecctive. In LDH assay of hypoxia all of herbs were effective. DMH, BC, SY, NS were more effective than other herbs. In LDH assay of reoxygenation KH, BH, BBR, DMH were especially effective. In MTT assay of reoxygenation most of herbs were not effective. But GC, SY, BH, JP were effective. Conclusion : The results imply that SHJG+P and all of berbs may have protective effect on dementia and GC, SY, BH, JP may have protective effect.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.21-22
• /
• 2021

This study incorporates fine waste glass (GS) as a replacement for natural sand (NS) in ground granulated blast furnace slag (GGBS) based alkali activated mortar (AAm). Tests were conducted on the AAm to determine the mechanical properties, apparent porosity and the durability based on its resistance to Na2SO4 5% and H2SO4 2% concentrated solutions. The study revealed that increasing GS up to 100 wt%, increased strength and decreased porosity. The lower porosity attained with the incorporation of GS, improved the resistance of mortar to Na2SO4 and thus increasing durability. However, the durability of mortar to H2SO4 solution was negatively impacted with the further reduction of porosity observed with increasing GS above 50 wt.% believed to be caused by the stress induced as a result of expansive reaction products created when the mortar reacted with acid.