• Computational Structural Engineering
• /
• v.2 no.4
• /
• pp.15-20
• /
• 1989

이글에서는 2가지 예제를 통해 h-version과 p-version의 비교를 살펴보면서 p-version 해석이 h-version에 비해 상대적으로 많은 장점들을 가지고 있으며, 신뢰도, 정확도, 효율성, 경제성, 용장성 등 측면에서 우월함을 증명해 보였다. 특히 응력집중(stress concentration)이 일어나는 crack-tips, cut-outs, reentrant corners, presence of stiffners, mixed boundary conditions 등 많은 특이성(singularity) 문제에 더욱 적합함을 본 예제 외의 발표된 많은 논문들을 통해 알 수 있으며, 모델링의 단순성에 기인하여 사용이 매우 쉽다는 것도 무엇보다 큰 이점이라 하겠다. p-version은 h-version의 비효율성을 차수 p를 1, 2 또는 3으로 줄인 후 이 값을 고정시키고 다시 요소분할을 통해 진해(true solution)에 접근시키는 방식을 위하면 다시 종래의 h-version으로 환원되는 호환성을 갖고 있다는 것이다. 고로 구조해석에서 h-p version이 가장 이상적인 유한요소해석 방법이라 할 수 있겠는데, 다시 말하면 균열문제의 경우 균열선단(crack-tip)에서는 p-level을 높이고 (p=8, 9 or 10) 비교적 응력집중이 낮은 영역에서는 p-level을 낮춤으로써 (p=3, 4 or 5) 그 효율성을 극대화할 수 있겠다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.565-574
• /
• 2002

We propose an algorithm for the robust transmission of video in error prone environment based on multiple description (MD) scheme and simple rate-distortion operators. The redundancy rate-distortion (RRD) criteria is used to split a one-layer compressed video stream into two correlated descriptions. The proposed algorithm can find more candidate points on the RRD curve than the conventional RRD based methods. A new distortion measure is also defined in this paper, which considers more realistic error environments. Since the proposed MD video coder is based on the standard H.263 coder, each description can be decoded independently by the standard H.263 decoder. Also, several descriptions can be decoded into a single stream by additional merge stage and the H.263 decoder. Simulation results show that the proposed MD video coder yields better performance than the conventional MD splitting algorithm at all bitrates both in single and two description cases.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.264-267
• /
• 2005

A subregional slicing method (SSM) is proposed to increase the nanofabrication efficiency of a nano-stereolithography (NSL) process based on two-photon polymerization (TPP). The NSL process can be used to fabricate 3D microstructures via the accumulation of layers of uniform thickness; hence, the precision of the final 3D microstructure depends on the layer thickness. The use of a uniform layer thickness means that, to fabricate a precise microstructure, a large number of thin slices is inevitably required. leading to long processing times. In the SSM proposed here, however, the 3D microstructure is divided into several subregions on the basis of the geometric slope, and then each of these subregions is uniformly sliced with a layer thickness determined by the geometric slope characteristics of each subregion. Subregions with gentle slopes are sliced with thin layer thicknesses, whereas subregions with steep slopes are sliced with thick layer thicknesses. Here, we describe the procedure of the SSM based on TPP, and discuss the fabrication efficiency of the method through the fabrication of a 3D microstructure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1763-1770
• /
• 2000

A finite element interface system for the design of optimal spot welding locations has been developed. In order to find out the optimal locations of spot welding points, iterative finite element an alyses are necessary, and thus automatic generation of finite element model for the structures with spot welded pointsis required. In this interface system, quadrilateral shell elements are automatically generated for finite element analysis of spot welded structured, which employs a domain decomposition methodand adaptive mesh(h-method).

• The Research Journal of the Costume Culture
• /
• v.28 no.1
• /
• pp.1-14
• /
• 2020

This study is based on a representative body shape drawn from previous studies that classify adult male torso shapes. In this study, a design method is proposed by developing a tight-fit pattern that can be easily developed into various items and designs using the body surface development figure. This is obtained by converting the 3D body shape of the model representing the representative body shape. The specific design method was conducted as follows. Actual measurement values were used for waist back length, waist-to-hip length, shoulder length. The scye depth was determined as C/4-1.7 cm, and the front and back Interscye was set at (1/2 × actual measurements)-0.2 cm. The front-back neck breadth was set to (1/5 × base neck circumference)-1.3 cm and (1/5 × base neck circumference) cm. The front-back neck depth was set to (1/5 × base neck circumference)-1.2 cm and 3.5 cm. Front chest circumference was C/4-1 (front-back difference)cm; (1/4 × back chest circumference) was C/4 + 1 (front-back difference) + 0.3 (dart amount) cm. Front waist circumference was W/4-0.2 (front-back difference) + 2.2 (dart amount) cm; back waist circumference was W/4 + 0.2 (front-back difference) + 2.5 (dartamount) cm; front hip circumference was H/4 + 0.2 (ease) + 0.2 (front-back difference) cm; and back hip circumference was H/4 + 0.2 (ease)-0.2 (front-back difference) cm; Front droop was 1.6 cm. The newly developed tight-fit pattern is expected to be of great use as a basis for garment construction.

• Korean Journal of Animal Reproduction
• /
• v.25 no.4
• /
• pp.399-407
• /
• 2001

The microinjection of retroviral vectors into the perivitelline spaces of MII-stage oocytes increased production of transgenic bovine embryos. However, oocytes have various sizes of perivitelline space, and there is the tendency that the oocyte membranes are damageable by micropipettes during the injection of retroviral vectors into perivitelline spaces or oocytes. Thus, it was not always possible to stably inject retroviral vector into perivitelline spaces of oocytes. Here we used sucrose to minimize the damage of the oocyte membrane. When the oocytes were suspended in 0.5% sucrose, poor quality oocytes showed rough cytoplasmic membranes, while good quality oocytes maintained smooth membranes. However, when the tatters were subjected to in vitro fertilization, no significant differences were observed in cleavage rates (82% of control Vs. 84% of sucrose treated oocytes). The Same trends were obtained from the oocytes fertilized after microinjection of LN$\beta$-EGFP and LNC-hGH genes into the perivitelline spares. The rates of cleavage and blastocyst from microinjection of LN$\beta$-EGFP genes were 81 and 25%, and from microinjection of LNC-hGM genes were 53 and 30%, respectively. The result indicated that microinjected oocytes could develop to the blastocyst stages after in vitro fertilization with no significant difference from control group. Moreover, the integration of hGH-gene (by PCR analysis) was detected in 52% of infected cleaved embryos and the expression of EGFP-gene (under a fluoresrence microscope) was also observed in 34% of infected blastocyst. These results indicated that 0.5% sucrose treatment could be an efficient method not only to select good quality embryos but also to inject retroviral vectors into perivitelline spares without any harm and hence improving developmental rates.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.17-22
• /
• 1993

The intersection problem of three-dimensional free form surfaces can be solved by geometrical and numerical methods. Up to now, the subdivision technique, which is classified under the former, has been largely employed to find the cross section of ship hull form. In this paper, an algorithm is presented for intersecting ship hull form in high speed. The high speed calculation algorithm is based on simple numerical methods, such as the secant method, false position method and bisection method. The algorithm is directly applicable to depicting arbitrary ship cross sections, drawing ship lines and constructing the offset table.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.23-28
• /
• 2010

Reliable dynamic analysis is essential in order to properly maintain structures so that structural hazards may be minimized. The finite element method (FEM) is proven to be an affective approximate method of structural analysis if proper element types and meshes are chosen. When the method is applied to dynamics analyzed in time domain, the meshes may need to be modified at each time step. As many meshes need to be generated, adaptive mesh generation schemes have become an important part in complex time domain dynamic finite element analyses of structures. In this paper, an adaptive mesh generation scheme for dynamic finite element analyses of structures is described. The concept of representative strain value is used for error estimates and the refinements of meshes use combinations of the h-method (node movement) and the r-method (element division). The validity of the scheme is shown through a cantilever beam example under a concentrated load with varying values. The example shows reasonable accuracy and efficient computing time. Furthermore, the study shows the potential for the scheme's effective use in complex structural dynamic problems such as those under seismic or erratic wind loads.

• Journal of Embryo Transfer
• /
• v.19 no.1
• /
• pp.67-73
• /
• 2004

본 연구는 우리나라 고유의 유전자원인 재래산양의 체내수정란 생산기술을 확립하고자 수행하였다. 흡입법(aspiration)과 세절법(slicing)에 의해 난소 한 개당 회수된 난자의 수는 3.9개와 4.1개를 나타내어 slicing방법이 aspiration방법보다는 많은 숫자의 난자를 회수하였으나 유의적인 차이는 나타내지 않았다. 회수된 난자의 등급별 분포는 aspiration방법에서 Grade I, Grade II, Grade III, Grade IV의 비율이 10.3%, 20.5%, 38.5%, 30.8%를 나타내었으며, slicing법에서는 9.8%, 22.0%, 39.0%, 29.3%를 나타내어 Grade III과 Grade IV의 비율이 70% 이상을 차지하였다. 회수된 난자를 체외성숙 시킨 결과 Grade I과 Grade II에서는 85% 이상이 metaphase H (MII)까지 도달하였으나, Grade III과 Grade IV는 40% 이하의 체외성숙율을 나타내었다. 체외수정용 배양액으로 BO를 사용하였을 경우 Grade I 및 II에서 84.4%의 난분할율을 나타내어 TALP를 사용하였을 때의 58.8%보다 높은 난할율을 보였다. 또한 배양액의 종류별 체외발달율에 있어서는 상실배 및 배반포기배로의 발달은 mSOF를 배양액으로 이용하였을 경우 15.0%의 발달율을 나타내었으며, 체외배양 시 항산화물질인 glutathione (GSH)을 첨가함으로서 26.8%의 상실배 및 배반포배로의 발달율을 나타내었다.

• Computational Structural Engineering
• /
• v.4 no.2
• /
• pp.77-85
• /
• 1991

A new finite element technology based on the p-version of E.F.M. is discussed with reference to its potential for application to stress intensity factor computations in linear elastic fracture mechanics, especially cracked cylindrical shells. It is shown that the p-version model is far better suited for computing the stress intensity factors than the conventional h-version models with the help of three test problems. The main advantage of this technology is that the accuracy of approximation can be established without mesh refinement or the use of special procedures such as crack-tip element and mixed variational approach.