• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.429-437
• /
• 2020

In this study, a cationic gemini surfactant was synthesized using isosorbide, in order to modify the alkyl chain length in the range of C₁₀~C₁₆. The c.m.c and surface tension of the synthesized cationic gemini surfactant were measured to be in the ranges of 5.13 × 10^-4~1.62 × 10^-4 mol/L and 31.86~37.41 dyne/cm, respectively. The surface tension increased with increasing the length of the alkyl group. In addition, as the area per molecule occupied by the surfactant adsorbed on the interface increased with the reduced extent of adsorption, the bubble generation at the air-water interface decreased. The emulsifying capacity in benzene was maintained above 60 ± 5% after 8 h while that in soybean oil tended to decrease above 50 ± 5%. The performance was superior in benzene, a highly hydrophobic substance, and the emulsion stability was shown to be consistent beyond 1 h during the preparation of pre-emulsion in oil and water. The antimicrobial activity was dependent on the length of the hydrophobic chain of the synthesized cationic gemini surfactant due to the increased size of the clean zone in Escherichia coli (E.coli) and Staphylococcus aureus.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.642-652
• /
• 2014

The synthesis of octenyl succinyl ${\beta}$-gucan (OSA-${\beta}$-glucan) was carried out and its interfacial properties at the oil-water interface and in emulsion systems were investigated. An aqueous ethanol system as a reaction media was used to facilitate the synthesis process; 10% (w/w) ethanol found to be the best as it showed a maximum degree of substitution (DS: 0.0132). FT-IR showed a characteristic absorption spectrum at $1736cm^{-1}$, indicating the esterification of octenyl succinyl groups to ${\beta}$-glucan backbone. As for interfacial tension measurements, it was decreased with increasing concentration of OSA-${\beta}$-glucan in the aqueous phase and when NaCl was added to aqueous OSA-${\beta}$-glucan solution in the range of 0.01 M to 0.1 M and also when pH was raised (pH 3 ~ pH 9). In systems of emulsion stabilized with OSA-${\beta}$-glucan, fat globule size found to decrease with increasing concentration of OSA-${\beta}$-glucan, showing a critical value of about $0.32{\mu}m$ at 0.5 wt%. When the OSA-${\beta}$-glucan emulsions were stored, it was found that fat globule size was increased with storage time and particularly pronounced increase was observed in emulsion with 1% OSA-${\beta}$-glucan, possibly due to depletion flocculation. Results of creaming stability evaluated by light scattering technique showed that it was more stable in emulsions containing smaller fat globule size. Surface load of OSA-${\beta}$-glucan in emulsions increased with increasing concentration of OSA-${\beta}$-glucan, suggesting a multilayer adsorption.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.1-7
• /
• 1995

Spectrophotometric determination of U(VI) and Th(IV) by Flow injection method is described. Chrome Azurol S forms water soluble complexes with U(VI) and Th(IV) in the presence of cethyltrimethylammonium bromide. The maximum adsorption of U(VI) and Th(IV) complexes are at 600nm with molar absorptivity of $2.3{\times}10^5Lmol^{-1}cm^{-1}$ and 611nm with molar absorptivity of $3.8{\times}10^5Lmol^{-1}cm^{-1}$ in acetate buffer medium having pH 5.0 and 5.5. The calibration curves of U(VI) and Th(IV) are linear over the range of 0.1~0.8ppm and the correlation coefficients are ca. 0.9960 and 0.9930 respectively. The detection limits(S/N) are 20ppb for U(VI) and 15ppb for Th(IV). The relative standard deviation are ${\pm}1.8%$ for U(VI) and ${\pm}2.1%$ for Th(IV). The sample throughput was ca. $50hr^{-1}$.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.167-181
• /
• 2017

Graphene-based materials have been considered as a promising membrane material, due to its easy processability and atomic thickness. In this study, we studied on gas permeation behavior in few-layered GO membranes prepared by spin-coating method. The GO membrane structures were varied by using different GO flake sizes and GO solutions at various pH levels. The GO membranes prepared small flake size show more permeable and selective gas separation properties than large one due to shortening tortuosity. Also gas transport behaviors of the GO membranes are sensitive to slit width for gas diffusion because the pore size of GO membranes ranged from molecular sieving to Knudsen diffusion area. In particular, due to the narrow pore size of GO membranes and highly $CO_2$-philic properties of GO nanosheets, few-layered GO membranes exhibit ultrafast and $CO_2$ selective character in comparison with other gas molecules, which lead to outstanding $CO_2$ capture properties such as $CO_2/H_2$, $CO_2/CH_4$, and $CO_2/N_2$. This unusual gas transport through multi-layered GO nanosheets can explain a unique transport mechanism followed by an adsorption-facilitated diffusion behavior (i.e., surface diffusion mechanism). These findings provide the great insights for designing $CO_2$-selective membrane materials and the practical guidelines for gas transports through slit-like pores and lamellar structures.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.86-91
• /
• 1995

In order to expand the utility of alginic acid in the food industry, we have investigated to prepare low viscous alginic acid using a method for degradation of alginic acid with the enzyme system of Vibrio sp. AL-145. The enzyme showed maximum activity at pH 8.0 and $37^{\circ}C$, and was stable in the pH range 7.5 to 8.5 and at temperature up to $30^{\circ}C$, and 0.5M NaCl needed for the enzyme activity. The viscosity of alginic acid decreased with the reaction time courses regardless of alginic acid and enzyme concentration, and 90% of viscosity decreased with 60 min of reaction time, but the changes of reducing sugar not exhibited. The soluble concentration of partially degradated alginic acid(PDA) in water was about 10%(w/v), and adsorption capacity of $Ca^{2+}$ ion increased with increasing the concentration of PDA. The alcohol concentration on precipitation of PDA was higher than Na-alginic acid.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.61-68
• /
• 2009

The main objective of this study was to examine the removal of heavy metals from water by inflated vermiculites. The component of vermiculites was analyzed by XRF, and the concentration of metal ion was measured by ICP-AES. Serial batch kinetic tests and batch sorption tests were conducted to determine the removal characteristics for heavy metals in aqueous solutions. As a result, solution pH values of tests with the inflated vermiculites generally increased and then stabilized. Equilibrium pHs were generally established within 5 hrs. In addition, removal rates of inflated vermiculites were tested at the initial concentration of 3 mg/L. As a result, at equilibrium concentration, except for chromium (36.23%), Most of the heavy metals were effectively removed (96.08~98.54%). Finally, sorption data were correlated with both Langmuir and Freundlich isotherms. The Qmax obtained from Langmuir isotherm were determined to Pb $725.4mg\;kg^{-1}$, Cd $568.8mg\;kg^{-1}$, Zn $540.2mg\;kg^{-1}$, Cu $457.2mg\;kg^{-1}$ Cr $0.9mg\;kg^{-1}$ respectively. The results of the study indicate that inflated vermiculites can be properly used as an adsorbent for various heavy metals because of its outstanding removal rate.

• Korean Journal of Veterinary Research
• /
• v.30 no.2
• /
• pp.145-156
• /
• 1990

This study was purposed to produce blood typing reagents for classifing Cheju horse's blood group factors. The blood typing reagents were prepared by immunization of sixteen pairs out of fourty eight heads of Cheju horses, and seventeen different blood typing reagents (anti-$A_1$, A', H, Z, $ZZ_2$, C, J, K, $P_1$, Q, R, S, $T_1$, $N_1$, $U_2$, X and $E_2$) were prepared from equine isoimmunization. The result for the reagent production and the variation of agglutinin and hemolysin titer are as follows: 1. Anti-K, R, S, $N_1$, $U_2$ and X acted exclusively as hemolysins whereas anti-J, $P_1$, $T_1$ and $E_2$ acted exclusively as agglutinins, however, Anti-$A_1$, A', H, Z, $ZZ_2$, C and Q reacted both as hemolysins and agglutinins. 2. Among the antibodies in most of the reagents reacted both as hemolysins and agglutinins, But anti-$A_1$, H, Z, $ZZ_2$ and Q elevated higher agglutin titers than hemolysin titers, Anti-A' and anti-C elevated higher hemolysin titers than agglutinin titers. 3. Complex antibody $A_1U_2$ was adsorbed $U_2$ and unified to $A_1$, while complex antibody X $N_1$ went through an adsorption process and produced simple antibody X and $N_1$, respectively. 4. In the hemolytic reaction, anti-K and anti-R showed the highest titer, In the agglutination reaction, anti-Z and anti-$ZZ_2$ showed the highest titer. 5. In the case of No.138~No.140 horse immunization combination and No.133~No.146 horse immunization combination, Although production of complex antibody $CE_2$ and $JP_1$ were expected, only anti-$E_2$ and anti-J were produced respectively. 6. The degree of elevation of antibody titer was varied by the blood types and by the types of donor and recipient combination. The fast elevating types, slow elevating types and types that never elevate the antibody titer were identified.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.840-845
• /
• 2011

Degradation products of agarose are biologically active and thus used as an ingredient in pharmaceuticals or functional cosmetics. Furthermore, it has been strongly considered as a substrate for bio-ethanol fermentation. Recently, we isolated new agarase-producing microorganism, Pseudoalteromonas sp. from south sea of Korea. In this study, we aimed to separate and purify the agarase from culture broth of this strain. Separation of agarase was performed by ion- exchange chromatography on DEAE-Sepharose resin. Equilibrium pH and volume ratio of resin to the amount of protein were optimized for the efficient adsorption of protein. 410 ${\mu}g$ of protein was completely adsorbed to 3 mL of resin at pH 7.5. The total amount of eluted protein increased as NaCl concentration increased to 400 mM at isocratic elution. Agarase was separated by linear gradient elution of NaCl (0~1,000 mM). Three major protein peaks were observed and the presence or absence of agarase in these eluted proteins was measured by Lugol's staining technique. Only six eluted protein fractions showed strong agarase activity.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.284-289
• /
• 2003

Titanium mesoporous materials have received increasing attention as a new photocatalyst in the field for photocatalytic degradation of organic compounds. The photocatalytic degradation of chlorothalonil by mesoporous titanium oxo-phoswhate (Ti-MCM) was investigated in aqueous suspension for comparison with $TiO_2$, (Degussa, P25) using as an effective photocatalyst of organic pollutants. Mesoporous form of titanium Phosphate has been prepared by reaction of sulfuric acid and titanium isopropoxide in the presence or n-hexadecyltrimethylammonium bromide. The XRD patterns of Ti-MCM are hexagonal phases with d-spacings of 4.1 nm. Its adsorption isotherm for chlorothalonil reached at reaction equilibrium within 60 min under dark condition with 28% degradation efficiency. The degradation ratio of chlorothalonil after 9 hours under the UV radiation condition (254 nm) exhibited 100% by Ti-MCM and 88% by $TiO_2$. However, these degradation kinetics in static state showed a slow tendency compared to that of stirred state because of a low contact between titanium matrices and chlorothalonil. Also, degradation efficiency of chlorothalonil was increased with decreasing initial concentration and with increasing pH of solution. As results of this study, it was clear that mesoporous titanium oxo-phosphate with high surface area and crystallinity could be used to photo- catalytic degradation of various organic pollutants.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.285-297
• /
• 2002

This study was carried out to prove the factor properties of the soil affected by a forest fire through the physical and chemical analysis and the data from the conclusion of those analysis are applied to the development of technics that reduces a forest fire-induced 2nd damage. The forest fire was in December 2000 at Gangreung city and Donghae city, Gangwon provinces, Korea. Soil samples were collected at upper layers (0-5 cm) and bottom layers (5-40 cm) in November 2001 from the burned and control sites. Values of pH in burned soils of the upper layers affected by forest fire are higher than those in control soils. Both the fragments of fire-burned plant and differences of geological properties are resulted in a class of soil. Contents of organic matters in burned soils are higher than those in control soils, exceptionally the contents of organic matters in burned soils that contain coaly shale are lower than those in control soils. Weathering indices in burned soils are higher than those in control soils and it concerned with loss of soil. Iron ions Fe(Fe$^{2+}$ or Fe$^{3+}$) are easily extracted from the burned soils by rainfall, but Mn ions are straightly exist in the burned soils by physiochemical adsorption of colloid. Through the sequential extraction in the burned soils and control soils, we are certificate the extraction of Fe ions and the disturbance of Mn ions from the burned soils. As a consequence of factor analysis in burned soil and control soil, we are certificate that the influence of forest fire results in a disturbance of positive correlation factors.