• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.615-623
• /
• 2006

The gyroscope free strap-down INS is composed only of accelerometers. Any gyroscope free INS navigation error is deeply affected by the accuracy of the sensor bias, scale factor, orientation and location error. However these parameters can be found by calibration. There is an important research issue about a multi-position calibration method in this paper. It provides a novel method to find the error parameters for the six-accelerometer INS. A superior simulation is shown that the multi-position calibration can find the specifications of a six-accelerometer INS in laboratory. From these parameters the six-accelerometer INS could apply in realistic navigation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.7
• /
• pp.632-637
• /
• 2012

This paper introduces a simple and efficient calibration method for three-axis accelerometers and three-axis gyroscopes using three-axis motion rate table. Usually, the performance of low cost MEMS-based inertial sensors is affected by scale and bias errors significantly. The calibration of these errors is a bothersome problem, but the previous calibration methods cannot propose simple and efficient method to calibrate the errors of three-axis inertial sensors. This paper introduces a new simple and efficient method for the calibration of accelerometer and gyroscope. By using a three-axis motion rate table, this method can calibrate the accelerometer and gyroscope simultaneously and simply. Experimental results confirm the performance of the proposed method.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.3
• /
• pp.107-117
• /
• 2019

When a vehicle moves with a high rotation rate, it is not easy to measure the angular velocity using an off-the-shelf gyroscope. If the angular velocity is estimated using the extended Kalman filter in the gyro-free inertial navigation system, the effect of the accelerometer error and initial angular velocity error can be reduced. In this paper, in order to improve the navigation performance of the gyro-free inertial navigation system, an angular velocity estimation method is proposed based on an extended Kalman filter with an accelerometer random bias error model. In order to show the validity of the proposed estimation method, angular velocities and navigation outputs of a vehicle with 3 rev/s rotation rate are estimated. The results are compared with estimates by other methods such as the integration and an extended Kalman filter without an accelerometer random bias error model. The proposed method gives better estimation results than other methods.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.3
• /
• pp.214-226
• /
• 2023

A transfer alignment is used to initialize, align, and calibrate a SINS(Slave INS) using a MINS(Master INS) in motion. This paper presents an airborne transfer alignment with velocity and azimuth matching to estimate inertial sensor biases under the wing flexure influence. This study also considers the lever arm, time delay and relative orientation between MINS and SINS. The traditional transfer alignment only uses velocity matching. In contrast, this paper utilizes the azimuth matching to prevent divergence of the azimuth when the aircraft is stationary or quasi-stationary since the azimuth is less affected by the wing flexibility. The performance of the proposed Kalman filter is analyzed using two factors; one is the estimation performance of gyroscope and accelerometer bias and the other is comparing aircraft dynamics and attitude covariance. The performance of the proposed filter is verified using a long term flight test. The test results show that the proposed scheme can be effectively applied to various platforms that require airborne transfer alignment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.28-28
• /
• 2000

Low-cost solid-state inertial sensors of three rate Gyroscopes and a triaxial Accelerometer are evaluated in static and dynamic environments. As a interim result, error models of each inertial sensors are generated. Model parameters with respect to temperature are acquired in static environment. These error models are included in an Extended Kalman Filter(EKF) to compensate bias error due to temperature variation. Experimental results in dynamic environment are included to show the validity of the each error model and the performance improvement of a compensated low cost inertial sensors for a navigational application

• Journal of Information Processing Systems
• /
• v.20 no.2
• /
• pp.159-172
• /
• 2024

The number of healthcare products available for pets has increased in recent times, which has prompted active research into wearable devices for pets. However, the data collected through such devices are limited by outliers and missing values owing to the anomalous and irregular characteristics of pets. Hence, we propose pet behavior recognition based on a hybrid one-dimensional convolutional neural network (CNN) and long short- term memory (LSTM) model using pet wearable devices. An Arduino-based pet wearable device was first fabricated to collect data for behavior recognition, where gyroscope and accelerometer values were collected using the device. Then, data augmentation was performed after replacing any missing values and outliers via preprocessing. At this time, the behaviors were classified into five types. To prevent bias from specific actions in the data augmentation, the number of datasets was compared and balanced, and CNN-LSTM-based deep learning was performed. The five subdivided behaviors and overall performance were then evaluated, and the overall accuracy of behavior recognition was found to be about 88.76%.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.117-125
• /
• 2005

Generally, the inertial navigation and guidance unit uses AF(Analog-to-Frequency) converters which convert analog signals into frequency signals to enhance a measurement accuracy of gyroscope and accelerometer outputs. The confidence level of AF converter is guaranteed by a prudential decision of calibration procedure and a performance of periodic calibration test. In this paper, we focus on the synchronous charge balance type AF converter which has a separate positive or negative current input and its calibration method is described. The calibration tests are classified into the scale factor error calibration and the bias calibration. These tests are automatically performed by the calibration program.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.71-78
• /
• 2024

In indoor environments, since global positioning system (GPS) signals can be blocked by obstacles, such as building structure. the performance of GPS-based positioning methods can be degraded because of the loss of GPS signals. To solve this problem, various localization schemes using inertial measurement unit (IMU) sensors, such as gyroscope, accelerometer, and magnetometer, have been proposed to enhance the positioning accuracy in indoor environments. IMU-based positioning methods can estimate the location of the user by calculating the velocity and heading angle of the user without the help of GPS. However, low-cost MEMS IMUs may lead to drift error and large bias. In addition, positioning errors in IMU-based positioning approaches can be caused by the irrelevant motion of the pedestrian. In this study, we propose an enhanced indoor positioning method that provides more reliable localization results by using the camera, light detection and right (LiDAR), and ARKit framework on the iPhone. Through reliable positioning results and augmented reality (AR) experiences, our indoor positioning system can provide indoor space guidance services.