• 한국정밀공학회지
• /
• 제24권7호
• /
• pp.33-38
• /
• 2007

• Ocean Systems Engineering
• /
• 제5권3호
• /
• pp.221-243
• /
• 2015

This paper compares simplified and finite element method (FEM) models for tower and blade in dynamic coupled analysis of floating wind turbine. A SPAR type wind turbine with catenary mooring lines is considered in numerical analysis. Floating body equation is derived using boundary element method (BEM) and convolution. Equations for mooring line, tower and blade are formulated with theories of catenary, elastic beam and aerodynamic rotating beam, respectively and FEM is applied in the formulation. By combining the equations, coupled solutions are calculated. Tower or blade may be assumed rigid or lumped body for simplicity in modeling. By comparing floating body motions, mooring line tensions and tower stresses with the simple model and original FEM model, the effect of including or neglecting elastic, rotating and aerodynamic behavior of tower and blade is discussed.

• 환경영향평가
• /
• 제16권1호
• /
• pp.15-26
• /
• 2007

Surface water is the main drinking water source in Korea. Algal bloom caused by phytoplankton in reservoir is common event in every summer season. To prevent or control the algal blooms, artificial circulation system has been adopted in many reservoirs, including Hoengseung reservoir. Total 7 hydraulic-gun-aerators were installed around the intake tower in Hoengseung reservoir since 2000. This study is to elucidate the effects of hydraulic-gun-aerators on phytoplankton bloom, pH, DO, temperature and evaluate the selective withdrawal and vertical distribution of phytoplankton by means of submersible fluorescence probe, which features high correlation with a standard ISO method (r=0.90, P<0.0001) for chlorophyll-a quantification.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권2호
• /
• pp.237-240
• /
• 2021

Failure of a suspension clamp made of hot dip galvanized cast iron in 154kV transmission tower was investigated. Metallurgical analysis of a crack of the clamp was performed using a digital microscope, an optical microscope, and a scanning electron microscope. It was revealed that the crack surface was covered by continuous zinc layer. Distinctive casting skin was found underneath both the outer surface and crack surface. The result showed that pre-existing crack had been formed in the fabrication, and liquid metal embrittlement during hot dip galvanization may assist crack propagation.

• 자연과학논문집
• /
• 제14권1호
• /
• pp.151-163
• /
• 2004

The landscape design was presented to a design for the theme park in Honseong. The site is located in Janchuk-li Unha-meon Hongseong-gun, Chungcheongnam-do and an area of about $1,594,001m^2$. This landscape design set the several main criteria as follows: an identity of GayanCheon's Picked Shrimps theme park, a cultural and tourist place for people, efficiency of landuse, and an environment friendly design. This GyanCheon's Picked Shrimps theme park is a multiple place for enjoying, resting, learning, and playing. An identity of this park was expressed by introducing the ocean scenery into park area which was devided 5 sub-spaces: a Place of the ocean King, an Entrance space for a Theme park, a Clock tower plaza, a Shrimp village, and a Distribution complex. Each space has the Theme about "shrimp" and is carefully connected with each other in terms of spatial sequence. By introducing diverse gathering and symbolical spaces for many kinds of events, the site could function as a cultural and tourist place of the Hongsung-gun.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.276_277
• /
• 2009

풍력 케이블의 nacelle부와 Tower 사이에 포설되는 케이블은 사용 환경의 특성상 장력+비틀림의 스트레스를 받는다. 이러한 사용 환경 때문에 케이블은 전기적인 특성 뿐 아니라 반복 운동을 하는 환경에 대해 구조적인 특성에 대해서도 검토가 요구되어진다. 본 논문에서는 풍력 케이블의 핵심 검토 요소로 도체의 구조적 위험 요소를 줄이기 위한 연구 대상으로 도체의 (*)피치 변화의 특성을 분석하였으며, 피치가 길어지면 도체에 발생되어지는 응력(스트레스)이 작아질 것이고 피치가 짧아지면 도체에 발생되어지는 응력(스트레스)이 커질 것이라는 일반적인 상식을 벗어나 각 피치별 응력(스트레스)의 최저점들을 찾게 되었고 그 중 유연성을 함께 고려하여 품질의 향상을 기여하는 최적 피치를 선정하였다.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3716-3724
• /
• 2023

Loose parts monitoring and detecting alarm type in real Nuclear Power Plant have challenges such as background noise, insufficient alarm data, and difficulty of distinction between alarm data that occur during start and stop. Although many signal processing methods and alarm determination algorithms have been developed, it is not easy to determine valid alarm and extract the meaning data from alarm signal including background noise. To address these issues, this paper proposes a denoising autoencoder-based majority vote classification. Training and test data are prepared by acquiring alarm data from real NPP and simulation facility for data augmentation, and noisy data is reproduced by adding Gaussian noise. Using DAEs with 3, 5, 7, and 9 layers, features are extracted for each model and classified into neural networks. Finally, the results obtained from each DAE are classified by majority voting. Also, through comparison with other methods, the accuracy and the false alarm rate are compared, and the excellence of the proposed method is confirmed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.105-106
• /
• 2023

In project projects where various factors arise, the construction company's initial establishment of a reasonable process plan reduces various variables and potential risks. In order to create a densely written initial process plan, it is necessary to compare the economic feasibility of time and money by reflecting Slack time. Through this, site managers can lead a successful project based on reasonable and stable construction.

• 한국응용과학기술학회지
• /
• 제37권2호
• /
• pp.173-182
• /
• 2020

본 연구에서는 주류공장 내 고농도 CO₂ 제거 및 포집을 위해 L-alanine 흡수제를 적용하여 CO₂ 흡수, 탈리 효율을 평가 후 재생 성능을 확인하였다. 탈리공정의 효율적인 처리를 평가하기 위해 실험실 규모에서 Hot plate, Steam 두가지 탈리 방법을 비교하였으며 Hot plate는 약 10%, Steam의 경우 약 60%의 재생효율을 확인하였다. 따라서 주류공장 내 100㎥/min 실증화 규모에 Steam-Tower 탈리공정을 적용하여 최적조건을 평가한 결과 탈리 유량 4L/min 이하, Steam 온도 160℃ 이상, 탈리효율 85.5%로 확인할 수 있었다.

• 대기
• /
• 제34권1호
• /
• pp.69-81
• /
• 2024

In this paper, Annual flux variations in the Boseong Tall Tower (BTT) from 2016 to 2020 were analyzed using data from three levels (2.5 m, 60 m, and 300 m). BTT was installed in Boseong-gun, Jeollanam-do in February 2014 and continued to conduct energy exchange observations such as CO2, sensible heat, and latent heat using the eddy covariance method until March 2023. The BTT was located in a very flat and uniform paddy field, and flux observations were conducted at four levels: 2.5 m, 60 m, 140 m, and 300 m above ground. Surface energy balance was confirmed from observed data of net radiation flux, soil heat flux, sensible heat flux, and latent heat flux. Additionally, 2.5 m height surface fluxes, which are most influenced by agricultural land, were compared with data from Local Data Assimilation and Prediction System (LDAPS) of the Korea Meteorological Administration to evaluate the accuracy of LDAPS flux data. The correlation coefficient between LDAPS flux data and observed values was 0.95 or higher. Excluding summer latent heat flux data, there was a general tendency for LDAPS data to be higher than observed values. The footprint areas estimated below 60 m height mainly covered agricultural land, and flux observations at 2.5 m and 60 m heights showed typical agricultural characteristics. In contrast, the footprint estimated at 300 m height did not show agricultural characteristics, indicating that observations at this height encompassed a wide range, including mountains, sea, and roads. The analysis results of long-term flux observations can contribute to understanding the energy and carbon dioxide fluxes in agricultural fields. Furthermore, these results can be utilized as essential data for validating and improving numerical models related to such fluxes.