• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.144-151
• /
• 2020

Agrivoltaic systems (AVS) is defined as combining farm-grown crops with photovoltaic panels (PV) installed several meters above the ground. Solar radiation (W/㎡), photosynthetic photon flux density (PPFD, µmol/㎡/s), air temperature (℃), vapor pressure (kPa), soil moisture (㎥/㎥), soil temperature (℃), wind direction (˚), and wind speed (m/s) were measured under the AVS in Boseong-gun during winter barley season. Data was collected by 5 minute interval. All data can download at Github site (https://github.com/chojaeil/AVS_Boseung). To gap-filling missing solar radiation data during about two weeks, the conversion coefficient from solar radiation to PPFD was estimated as 0.41. Further, according to the ratio of diffuse radiation to direct radiation, the maximum value among the twenty PPFD sensors under the AVS was related to the PPFD value of filed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.590-596
• /
• 2016

Biopsy is a typical needle type intervention procedure performed under radiographic image equipment such as computed tomography (CT) and cone-beam CT. This minimal invasive procedure is a simple and effective way for identifying cancerous condition of a suspicious tissue but radiation exposure for the patients and interventional radiologists is a critical problem. In order to overcome such trouble and improve accuracy in targeting of the needle, there have been various attempts using robot technology. Those devices and systems, however, are not for full procedure automation in biopsy without consideration for tissue sampling task. A robotic end-effector of a master-slave tele-operated needle type intervention robot system has been proposed to perform entire biopsy procedure by the authors. However, motorized sampling adopted in the device has different cutting speed from that of biopsy guns used in the conventional way. This paper presents the design of a novel robotic mechanism and protocol for the automation of biopsy procedure using spring-triggered biopsy gun mechanism. An experimental prototype has been successfully fabricated and shown its feasibility of the automated biopsy sequence.

• Korean Journal of Rural Living Science
• /
• v.9 no.1
• /
• pp.33-42
• /
• 1998

The purpose of this study was to find out the dietary attitudes and behaviors, intake frequencies of food groups, health-related opinions and practices, and sociodemographic characteristics of housewives in Wonju-Gun rural area. Interviewers asked 413 housewives about obove informations and then recorded. The results were as followes : Using the factor analysis processing, 17 questions about dietary attitudes and behaviors were categorized into 5 groups such as fidelity of diet, the healthful dietary attitudes, the eating practices concerning about items and amount, eating speed and the extent of coincidence in food preference within a family. The role of the housewives was a major factor affecting the dietary attitudes and behaviors. Those who work as housewives and farmers concurrently had good dietary practices concerning about items and amount, but they were interested about health-directed dietary attitudes at a significantly lower level. Food frequencies of 9 groups, animal protein food, fruits and vegetables, milk and milk products, small fishes such as anchovy, soybean curd and beans, seaweeds, vegetable oil, frying food, soybean paste were significantly associated with subjects' age, role, and education and income level. Whether or not intake of soybean paste was considered. protein food intake was altered, and the difference between two situations increased much more as age was higher. We noticed that intake of soybean paste improved the status of protein nutrition. Our subjects ate calcium sources and dishes using vegetable oil insufficiently. Those who had much interests for good health, revealed to be an active practitioner in the aspects of healthful dietary attitudes, but fidelity of diet, eating practices concerning about items and amount showed significant association with balanced life style.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.177-180
• /
• 2010

Two-stage light gas gun, sorted with Ballistic Range System, is used to research spray characteristics of supersonic liquid jets. When high pressure tube was pressurized to the 135 bar, diaphragm films which composed with OHP film are ruptured. Expansion gases accelerate a projectile approximately 250 m/s at the exit of pump tube. And accelerated projectile collides with liquid storage part and liquid jets were injected into supersonic conditions. Supersonic liquid jets show the multiple jets and generate shockwave at the forward region of jets. Supersonic liquid jets of speed and shockwave angle have different value at each case. Supersonic liquid jets with minimum velocities are injected with M=1.53 at the geometry condition of L/d=23.8.

• KIEAE Journal
• /
• v.10 no.1
• /
• pp.3-10
• /
• 2010

Riverside forests make a river bank stable because trees of them hold together the stone and soil by roots and decrease the speed of running fluid by trunks. So they become known to have positive effects on flood prevention. So This study will be a basic study to preserve and restore of riverside forests. The goal of this study is to classify types of Han riverside forests between Yangpyeng and Yeoju gun. and find out sites of planting. Results of this study can be summarized as follows; The evaluation indicators were set up based on literature review and site survey. Two indicator categories were developed: natural environment and human environment. And they were divided into 5 sub-categories for calculating weights. As for the major indicator categories, the weighted index of natural environment is at 0.5. And the weighted index of human environment is at 0.5 followed by access at 0.15, the range of user at 0.15, cultivated land at 0.1 and legislation at 0.1. This study selected 53 sites for riverside forests planting. They were classified with types of bank(11), level-upped riverside(32), island(10). The amount of the length of 11 bank types is 23,050m, the area of 32 level-upped riverside types is $4,490,000m^2$ and the area of 10 island types is $4,590,000m^2$. After the evaluation of 53 riverside forests, this study selected 12 sites of riverside forests. They were two bank types, nine level-upped riverside types, and one island type. Rebuilding riverside forests are to accomplish the green network which links and divides region. It will be one of the best ecological methods to construct friendly environmental region.

• The Journal of Korean Academy of Sensory Integration
• /
• v.9 no.1
• /
• pp.21-31
• /
• 2011

Objective : This study investigated the relationships of handwriting legibility and perceptual-motor skills, and handwriting speed and perceptual-motor skills. And identified the predictors that most affect the handwriting of preschool children. Methods : Twenty-three typically developing preschool aged children (mean age: 68.61 months, SD=2.04) were selected through the Korean-Denver Developmental Screening Test-2(K-DDST-2). The children were tested with regard to handwriting legibility, visual perception, visual-motor integration and fine-motor coordination. Results : First, a significant relationship was not found among handwriting legibility, visual perception, visualmotor integration and fine-motor coordination. Second, a significant relationship was found among handwriting speed, visual perception and fine-motor coordination. Third, stepwise multiple regression analyses showed that general visual perception were significant predictors for handwriting speed. Conclusion : Occupational therapists should evaluate children's visual perception levels utilizing a standardized test, and focus on general visual perception in order to improve handwriting skill(speed). Also, occupational therapists are expected to play an important role in the management and treatment of children's handwriting skills.

• Korean Journal of Materials Research
• /
• v.25 no.5
• /
• pp.226-232
• /
• 2015

High temperature plasma coating technology has been applied to recover damaged aluminum dies from wear by spraying pure aluminum and alumina powder. However, the coated mixed powder layer composed of aluminum and alumina often undergoes a detachment from the substrate, making the coated substrate die unable to maintain its expected life span. In this study, in order to increase the bonding strength between the substrate and the coating layer, a pure aluminum layer was applied as an intermediate bond layer. In order to prepare the specimen with variable bond coating conditions, the bond coat layers with a various gun speed from 10 cm/sec to 30 cm/sec were prepared with coating cycle variations ranging from three to nine cycles. The specimen with a bond coat layer coated with a gun speed of 20 cm/sec and three coating cycles exhibited ~13MPa of adhesion strength, while the specimen without a bond coat layer showed ~6 MPa of adhesion strength. The adhesion strength with a variation of bond coat layer thickness is discussed in terms of coating parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.448-453
• /
• 2016

Erosion and abrasion caused by cavitation damage occur in fluid equipment, such as ships or impellers. Similarly, the equipment damage from noise and vibration can shorten its life. This study analyzed the importance of the parameter characteristics of the process optimization of HVOF (High Velocity Oxygen Fuel spraying), which is generally used in a variety of industries for enhancing the resistibility from the cavitation phenomenon. The surface of the ALBC3 substrate was coated with an amorphous powder as a filler metal according to the experimental design using the Taguchi method, and then the characteristics with each parameter were analyzed using a porosity measurement test. The optimal process conditions was a combustion pressure of 80psi, coating distance of 270mm, gun speed of 200mm/s, and powder feed rate of 25g/min as a result of the HVOF coating by applying the experimental design. The combustion pressure, coating distance and powder feed rate were more than 25% and indicated a similar contribution rate, but the contribution rate of the gun speed was 19%, which was slightly less than the others. The contribution rate with each parameter was only slightly significant. On the other hand, all four parameters were found to be important in the contribution rate aspects of the HVOF coating process.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.362-367
• /
• 2017

This study was conducted to compare the particulate removal efficiency of the developed diesel particulate filter using various measurement methods in a high-speed marine diesel engine. A four-stroke mechanical marine diesel engine is used for the test, which has a maximum output of 403 kW and is coupled to an AC dynamometer to control engine speed and load. The test was conducted based on four steady-state engine operating conditions of E3 engine test cycle for the measurement of PM and soot removal efficiency using partial dilution method considered as gravimetric method and filter smoke number method as light absorption method, respectively. As a result of the removal efficiency measurement according to the application of diesel particulate filter, particulate matter was reduced from 76% to 91% and the soot was reduced by more than 90% while meeting the permissible engine back pressure. From these results, the applicability of diesel particulate filter adopted in high-speed marine diesel engines could be confirmed. In addition, based on the result that the particulate removal efficiency varies with different measurement methods, the necessity of unification of these methods could be identified.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.5
• /
• pp.61-71
• /
• 2011

To measure the fatigue of metallic objects at high speed vibration while non-contact precision displacement measurement on how to have a lot of research conducted. Noncontact high-speed vibration detection sensor of the eddy current sensors and laser sensors are used, but it is very expensive. Recently, High-speed vibrations detection using an inexpensive inductive sensor to have been studied, but is still a beginner. In this paper, a new design of an inexpensive inductive proximity sensor has been suggested in order to measure high frequency dynamic displacements of metallic specimens in a noncontact manner. Detection of the existing inductive sensors, detection, integral, and amplified through a process to detect the displacement noise due to weak nature of analog circuits and integral factor in the process of displacement detection is slow. The proposed method could be less affected by noise, the analog receive and high-speed signal processing is a new way, because AD converter (Analog to Digital converter) without using the vibration frequency signals directly into digital signals are converted. In order to evaluate the sensing performance, The proposed sensor module using non-contact vibration signals were detected while shaker vibration frequencies from 30Hz to 1,100 Hz at intervals of vibrating metallic specimens. Experimental results, Vibration frequency detection range of the metallic specimins within close proximity to contactless 5mm could be measured from DC to 1,100Hz and vibration amplitude of the resolution was $20{\mu}m$. Therefore, the proposed non-contact inductive sensor module for precision vibration detection sensor is estimated to have sufficient performance.