Browse > Article
http://dx.doi.org/10.3740/MRSK.2015.25.5.226

Improvement of Adhesion Strength of High Temperature Plasma Coated Aluminum Substrate with Aluminum-Alumina Powder Mixture  

Park, Jin Soo (Department of Materials Science and Engineering, Hanbat National University)
Lee, Hyo Ryong (SINWOO Co. Ltd.)
Lee, Beom Ho (SINWOO Co. Ltd.)
Park, Joon Sik (Department of Materials Science and Engineering, Hanbat National University)
Publication Information
Korean Journal of Materials Research / v.25, no.5, 2015 , pp. 226-232 More about this Journal
Abstract
High temperature plasma coating technology has been applied to recover damaged aluminum dies from wear by spraying pure aluminum and alumina powder. However, the coated mixed powder layer composed of aluminum and alumina often undergoes a detachment from the substrate, making the coated substrate die unable to maintain its expected life span. In this study, in order to increase the bonding strength between the substrate and the coating layer, a pure aluminum layer was applied as an intermediate bond layer. In order to prepare the specimen with variable bond coating conditions, the bond coat layers with a various gun speed from 10 cm/sec to 30 cm/sec were prepared with coating cycle variations ranging from three to nine cycles. The specimen with a bond coat layer coated with a gun speed of 20 cm/sec and three coating cycles exhibited ~13MPa of adhesion strength, while the specimen without a bond coat layer showed ~6 MPa of adhesion strength. The adhesion strength with a variation of bond coat layer thickness is discussed in terms of coating parameters.
Keywords
plasma thermal spray; interface; adhesion; coatings;
Citations & Related Records
연도 인용수 순위
  • Reference
1 F. Ghadami, M. HeydarzadehSohi and S. Ghadami, Surf. Coat. Technol., 261, 289 (2015).   DOI   ScienceOn
2 C. C. Berndt, Ph. D. Thesis, "The adhesion of flame and plasma sprayed coatings", Monash University, 1980.
3 O. Sarikaya, S. Anik, S. Aslanlar, S. C. Okumus and E. Celik, Mater. and Des., 28, 2443 (2007).   DOI   ScienceOn
4 O. Sarikaya, E. Celik, S. C. Okumus, A. Aslanlar and S. Anik, Surf. Coat. Technol., 200, 2497 (2005).   DOI   ScienceOn
5 O. Sarikaya, E. Celik, S. C. Okumus, A. Aslanlar and S. Anik, Surf. Coat. Technol., 200, 2497 (2005).   DOI   ScienceOn
6 E. Fleury, S. M. Lee, W. T. Kim and D. H. Kim, J. Non-Cryst. Solids, 278, 194 (2000).   DOI   ScienceOn
7 Handbook of Thermal Spray Technology, ed. J. R. Davis, ASM international, USA, (2004).
8 L.-M. Berger, Int. J. Refract. Met. H. Int., 49(3), 350 (2015).   DOI   ScienceOn
9 D. Chicot, H. Ageorges, M. Voda, G. Louis, M. A. Ben Dhia, C. C. Palacio and S. Kossman, Surf. Coat. Technol., in press (2015).
10 L. Gu, X. Fan, Y. Zhao, B. Zou, Y. Wang, S. Zhao and X. Cao, Surf. Coat. Technol., 206(21), 4403 (2012).   DOI   ScienceOn
11 A. Kawasaki and R. Watanabe, Compos. Pt. B Eng., 28(1-2), 29 (1997).   DOI   ScienceOn
12 Y. Chakravarthy, S. Bhandari, V. Chaturvedi, A. Pragatheeswaran, A. Nagraj, T. K. Thiyagarajan, P. V. Ananthapadmanaban and A. K. Das, J. Eur. Ceram. Soc., 35, 787 (2015).   DOI   ScienceOn