• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.692-695
• /
• 2000

This paper is concerned with Accuracy Design of LM Guide System in Machine Tools. Elastic deformation of bearing is calculated by Hertz contact theory and motion error of LM block is analyzed. A new algorithm using block stiffness is proposed fur the analysis of motion accuracy of the table. The best advantage of this algorithm is fast analysis speed because it isn't necessary iteration processes for satisfying equilibrium equation of the table. Motion errors of the table analyzed under artificial form error of rail theoretically and experimentally. Only one of two rails is bent by putting a thickness gauge into horizontal direction. This form error of rail is measured by gap sensor against the other rail. Then, motion errors of the table are predicted by proposed new algorithm theoretically and measured by laser interferometer. Measurements are carried out by changing the preload and thickness. The results show that the table motion errors are reduced from 1/2 to 1/60 times than form error of rail according to its height and width. And the effect of preloading is almost negligible.

• 대한암한의학회지
• /
• 제16권1호
• /
• pp.1-14
• /
• 2011

Background and Objectives : This study is an observational study of nonequivalent control group based on time lag design in order to determine the effectiveness of gargling Hwangryunhaedok-tang (HRHDT) on stomatitis caused by chemotherapy. Methods : The study period is from July 1st, 2010 to September 30th, 2010. The subjects are 13 patients who fit the profile of the study and who are admitted in the tumor department of the regional cancer center of C University Hospital which is located in Chung-Joo City. When stomatitis occurs after chemotherapy, the level of stomatitis is assessed using oral assessment guide score and oral discomfort score. Then mix 5 g of powered HRHDT and 60 ml of distilled water, and 15 ml of the solution is given to patients 4 times per day to gargle for 1 minute. For the control group, 60 ml of Chlorohexidin gargling solution is used; everyday for one week, 4 times per day, 15 ml per gargle and gargled for 1 minute. Oral Assessment Guide score and Oral Discomfort Score are assessed at same hour everyday. Crosstabulation analysis $X^2$(${\rho}$) was used to examine the demographic characteristics and difference of the two groups by using SPSS/WIN 12.0. For mean and standard deviation, descriptive statistical analysis was used. T-test was used to determine the difference of the oral discomfort scores. Result : The study has shown that the Oral Assessment Guide score of the experimental group has decreased more with more regularity. On the third day, the score of the control group is 20.16 and the score of the experimental group was 18.75, which showed a statistically significant difference with the level of significance of p<0.05. Oral Discomfort Score of the control group's score was 13.60 on the first day and 6.80 on the seventh day and the experimental group's score was 13.00 on the first day and 2.25 on the seventh day. The experimental group's score 2.25 is statistically significantly lower than the control group's score of 6.80 with the level of significance of p<0.05. Conclusions : The HRHDT gargling solution showed more regular effectiveness compared to Chlorohexidin solution on chemotherapy-caused stomatitis. Therefore this study has shown that HRHDT gargling solution can be used as an alternative medicine.

• 대한기계학회논문집B
• /
• 제41권3호
• /
• pp.161-169
• /
• 2017

터빈 블레이드의 내부냉각 설계 강화를 위해 설치된 경사요철과 가이드 베인에 대한 연구를 진행하였다. 채널의 입구로 들어오는 공기와 요철이 만나는 각도를 기준으로, 서로 상반된 두 가지 요철배열을 전연면과 후연면에 평행하게 배치하였다. 채널의 종횡비(AR)는 5:1이고, 요철의 각도는 $60^{\circ}$, 요철의 높이와 요철간 간격 비($e/D_h$)는 0.075이다. 레이놀즈 수는 10,000으로 고정하였다. 요철배열에 따른 2차 유동과 딘 와류의 상호작용이 곡관부와 전체 채널의 열전달 결과와 유동특성에 어떠한 영향을 미치는지 확인할 수 있었다. 결론적으로 첫 번째 유로의 요철배열이 팁 면의 열전달 분포에 지배적인 요인이며, 곡관부에서 유동의 분포에도 영향을 미쳤다. 또한 U자 형상 가이드 베인을 사용하였을 때 모든 요철에서 팁 면의 열전달 값이 상승하였으며, 특히 공기와 요철의 충돌각도가 양의각도일 때 가장 높은 냉각성능계수를 보였다.

• 대한치과보철학회지
• /
• 제60권2호
• /
• pp.143-151
• /
• 2022

목적: 본 연구의 목적은 두 가지 다른 임플란트 드릴 조합을 사용하여 열 발생과 드릴링 시간에 따른 성능 효율성을 평가하는 것이다. 재료 및 방법: 본 연구에서는 소갈비뼈를 연구재료로 사용하였다. 표본을 시험하기 위해 소의 뼈에서 근막 및 근육을 제거하고 드릴링 영역 주위에 온도 센서를 장착했고, 드릴링 후 온도 및 시간을 측정하였다. 실험군은 이니셜 드릴 전에 사용하는 드릴에 따라 가이드 드릴 사용 그룹과 린드만 드릴 사용 그룹으로 나누었다. 가이드 드릴 사용 그룹의 드릴 사용 순서는 다음과 같다; guide drill (ø 2.25), initial drill (ø 2.25), twist drill (ø 2.80), 그리고 twist drill (ø 3.20). 린드만 드릴 사용 그룹의 드릴 사용 순서는 다음과 같다; Lindmann drill (ø 2.10), initial drill (ø 2.25), twist drill (ø 2.80), 그리고 twist drill (ø 3.20). 통계적 분석은 Mann-Whitney U test 및 Friedman test를 이용하여 집단간 차이를 분석하였다 (α = .05). 결과: 가이드 드릴 사용 그룹의 각 시편에 대한 평균 성능 효율은 0.3861 - 1.1385 mm³/s 범위를 보였고, 린드만 드릴 사용 그룹의 평균 성능 효율은 0.1700 - 0.4199 mm³/s를 보였다. 가이드 드릴을 사용한 드릴 조합은 드릴링 시간으로 계산했을 때 우수한 성능 효율을 보였다 (P < .001). 결론: 가이드 드릴 사용 그룹이 린드만 드릴 사용 그룹보다 우수한 성능 효율을 보였기 때문에, 1차 드릴링을 수행하는 과정에서 가이드 드릴의 사용이 더욱 적합하였다.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2105-2113
• /
• 1995

The compressive tests under impact conditions were performed to establish a design guide for impact damage tolerance. The composition of layup was selected for the real cases of composite aircraft structure. The energy level of visible of visible damage threshold was determined as 7 Joules. It was found that the normalized bending stiffnesses in the direction of closely fixed boundary affected the area of damage. Graphite/epoxy used in the tests exhibited 60% reduction in compression strength at the energy level of visible damage threshold. Wet-conditioned specimens represented 9% reduction in residual compressive strength in comparison with room temperature ambient specimens. In this study, a design factor of 2.1 was proposed for the low velocity impact damage.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.27-32
• /
• 2000

Microearthquake records with magnitude 2.6~3.1 recorded in the southeastern part of the Korean peninsula during 1994~1998 are analyzed. Total of 42 records consisted of 12 events instrumented at 7 stations. The response spectra with the above data shows that the frequency range of the dominant response is about 10~25Hz and are compared with the standard response spectrum. The result implies that the characteristics of the microearthquake ground motion differ from those of standard response spectrum presented in US NRC Reg. Guide 1.60 especially at higher frequencies.

• 한국추진공학회지
• /
• 제17권1호
• /
• pp.52-60
• /
• 2013

이젝터-디퓨져 시스템은 두 유동 사이의 순수전단운동을 통해 저압의 2차유동을 동반하여 고압의 주된 유동을 만들어 낸다. 일반적으로, 이젝터-디퓨져 시스템에서 유동장은 난류 혼합, 압축 효과로 인해 매우 복잡하게 되며, 저효율의 큰 문제점을 가지고 있다. 현재까지 이젝터 시스템의 성능을 향상시키기 위한 많은 연구가 수행 되어 왔지만 만족스럽지 않은 실정이다. 본 연구에서는 이젝터 시스템의 성능향상을 위해 2차유동의 입구에 혼합 안내깃을 설치하였으며, CFD는 이젝터-디퓨져 시스템의 초음속 내부 유동을 모사하여 수행하였다. 얻어진 결과는 기존의 실험결과를 입증하였으며, 본 논문에서 혼합 안내깃 효과를 전압 손실, 유인비 및 압력회복에 대해서 논의되었다.

• 소성∙가공
• /
• 제20권1호
• /
• pp.60-63
• /
• 2011

BLU(back light unit) is one of kernel parts of LCD(liquid crystal display) unit. New 3-D micro-lens pattern for LGP(light guide plate), one of the most important parts of LCD-BLU, had been researched. Instead of dot pattern made by chemical etching or laser ablation, SCS(slanted curved surface) micro-lens pattern was designed with optical CAE simulation. This study introduce the method of design using optical CAE simulation for SCS micro-lens, the new fabrication method of micro-mold with SCS micro-lens pattern.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.637-644
• /
• 2006

Acceleration time history used in the seismic analysis of nuclear porter plant structure should envelop a target power spectral density (PSD) function in addition to design response spectrum. Current regulation guide defines the target PSD function only for the U.S. URC RG 1.60 Design Response Spectrum. This paper proposes a technical scheme to obtain the target PSD function compatible with generally defined design response spectrum. The scheme includes the methodology for design-spectrum compatible motion history in order to minimize the variation of the derived target PSD function. The PSD calculation procedure follows simple and practical methods allowed within regulation. Effectiveness of the proposed scheme is identified through an example problem. The design response spectrum In the example is based on U.S. NRC RG 1.60 but amplifies the spectral acceleration amplitudes above 9Hz. The target PSD function with little variation can be constructed with the reduced time history ensemble.

• 한국초등과학교육학회지:초등과학교육
• /
• 제30권4호
• /
• pp.535-552
• /
• 2011

The purpose of this study was to investigate elementary school teachers' conceptions on the general remarks (GR) in the new science teacher's guide, the teachers' conceptions on inservice training program of the GR, and their opinions of improvement on the GR. Also, the teachers' utilization of the GR was examined. The participants were 152 elementary school teachers who were teaching grade 3~6. A questionnaire was used to collect data. The results of this study are as follows; First, at least 13.2~17.1% of the teachers did not have specific conception of the purpose of the GR, and more than 90% of the teachers expressed that the GR is necessary in the teachers' guide. Second, about 60% of the teachers responded that the training program on the GR is necessary, and when the program is open, their most favorite agency and speaker were a provincial education office and a textbook developer(or author), respectively. Their most favorite time and period of the training program were the vacation and 15~30 hours, respectively. Third, the mean values on the frequency of use were lower than 3 point of the five-point Likert scale at both the GR for grade 3~4 and the GR for grade 5~6, and the teachers' main use of the GR was the planning a science lesson for an open class. Fourth, the teachers suggested various opinions and there was difference between the opinions about the GR for grade 3~4 and the opinions about the GR for grade 5~6.