Generation of Target PSD Function Compatible with Design Response Spectrum

설계응답스펙트럼에 부합하는 목표 PSD함수의 작성

  • 이상훈 (한양대학교 토목공학과,한국전력기술(주)Sang-Hoon) ;
  • 최동호 (한양대학교 토목공학과)
  • Published : 2006.03.17

Abstract

Acceleration time history used in the seismic analysis of nuclear porter plant structure should envelop a target power spectral density (PSD) function in addition to design response spectrum. Current regulation guide defines the target PSD function only for the U.S. URC RG 1.60 Design Response Spectrum. This paper proposes a technical scheme to obtain the target PSD function compatible with generally defined design response spectrum. The scheme includes the methodology for design-spectrum compatible motion history in order to minimize the variation of the derived target PSD function. The PSD calculation procedure follows simple and practical methods allowed within regulation. Effectiveness of the proposed scheme is identified through an example problem. The design response spectrum In the example is based on U.S. NRC RG 1.60 but amplifies the spectral acceleration amplitudes above 9Hz. The target PSD function with little variation can be constructed with the reduced time history ensemble.

Keywords