• Asian-Australasian Journal of Animal Sciences
• /
• 제10권2호
• /
• pp.215-222
• /
• 1997

Ten rice varieties were planted at two locations (lowland and highland), during the wet and dry seasons of different years. In vivo digestibility and voluntary intake of the straw, were determined in groups of fat-tail sheep, supplemented with $18g{\cdot}kg^{-0.75}$ concentrate DM, containing ~20% crude protein. Voluntary intake of digestible straw organic matter (DOMI) consistently varied from 15.2 to $20.9g{\cdot}kg^{-0.75}$ between straw varieties, averaged over locations, years and seasons, despite considerable variation between individual batches. This variation in the nutritive value of the straw was independent of straw and grain yield, so it would seem that there is scope for selection of rice varieties with straw of higher nutritive value. The variation in DOMI of straw among location of growth, year and season, was of a magnitude similar to the improvement brought about by urea-ammoniation. The in sacco degradation characteristics and digestibility of rice straw residues were superior to those of the offered straw. This can be attributed to a preference for rice straw leaves relative to stems. Averaged over location of growth, year and season, characteristics of in sacco degradation, i.e. the rate of fermentative degradation and the truly undegradable fraction, emerged as accurate predictors of the nutritive value of rice straw.

• Journal of Forest and Environmental Science
• /
• 제38권2호
• /
• pp.110-121
• /
• 2022

Leaf functional traits widely have been used to understand the environmental controls of resource utilization strategy of plants along the environmental gradients. By using key leaf functional traits, we quantified the relationships between leaf traits and local climate throughout the distributional range of Rhododendron caucasicum Pall. in eastern and western Georgian mountains (the South Caucasus). Our results revealed, that all traits showed high levels of intraspecific variability across study locations and confirmed a strong phenotypic differentiation of leaf functional variation along the east-west longitudinal gradient in response to the local climate; out of the explored climatic variables, the moisture factors related to precipitation and number of precipitation and dry days for winter and growth seasons were more strongly related to leaf trait variation than the elevation and air temperature. Among studied leaf traits, the leaf specific area (SLA) showed the highest level of variability indicating the different resource utilization strategies of eastern and western-central Rh. caucasicum individuals. High SLA leaves for western-central Caucasian individuals work in relatively resource-rich environments (more humid in terms of precipitation amount and the number of precipitation days in winter) and could be explained by preferential allocation to photosynthesis and growth, while eastern Caucasian samples work in resource-poor environments (less humid in terms of precipitation amount and the number of precipitation days in winter) and the retention of captured resources is a higher priority appearing in a low SLA leaves. However, more evidence from a broader study of the species throughout its distribution range by including additional environmental factors and molecular markers are needed for firmer conclusions of intraspecific variability of Rh. caucasicum.

• Food Science and Biotechnology
• /
• 제15권5호
• /
• pp.773-777
• /
• 2006

Growth of Bacillus cereus was assessed during the storage of seasoned soybean sprouts at 0,5, 10, and $15^{\circ}C$. No lag time in its growth curve was observed and thus the specific growth rate of B. cereus in the exponential growth phase was estimated for bootstrapped microbial count data. The distribution of the specific growth rate could be explained by the BetaGeneral distribution function, and temperature dependence was described by the Ratkowsky square root model. The temperature dependence of the growth could be successfully incorporated into the differential equation of microbial growth to predict the B. cereus count on the seasoned soybean sprouts under fluctuating temperature conditions. Safe shelf lives with different probabilities to reach $10^5\;CFU/g$ were presented at four different temperatures, considering the variation in initial contamination and specific growth rate by the Monte Carlo method and 2-step bootstrapping, respectively. Safe shelf lives defined as the time with a probability of less than 0.1% of reaching the critical limit, were 13.4, 5.2, 3.6, and 2.8 days at 0, 5, 10, and $15^{\circ}C$, respectively.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.251-256
• /
• 2019

ZnO를 통상적인 소결온도 이상의 온도 1385℃에서 소결하는 과정에서 mm 크기로 거대 성장된 입자를 갖는 세라믹스를 제조하였다. 1400℃에서 8시간 소결하는 경우 성장에 참여하지 않은 입자의 크기는 30~40 ㎛이고 거대 성장된 입자는 1,000 ㎛에 달하여 부피비 최소 10,000배 이상의 급속한 성장이 이루어졌다. 이러한 급속한 성장의 원인으로 일차 입자 크기분포, 성형압 불균일 또는 불순물의 합입등을 고려하였으며, 이들 중 일차입자 크기 분포일 것으로 추정되나 확실한 증거를 확보하지 못하였다. 미세구조 관찰을 통해 거대입자 성장은 주변의 입자를 통째로 합치는 과정을 통해 성장하는 것으로 추정된다.

• Membrane and Water Treatment
• /
• 제15권1호
• /
• pp.11-19
• /
• 2024

This study presents the characteristics of growth and morphology of Anabaena sp., a representative filamentous cyanobacterium, depending on temperature variation from 10 to 30 ℃. Both the filament density (or number) and its length of Anabaena were highly affected by temperature, as well as growth stage. Rapid growth at a higher temperature led to an increase in Anabaena filament density, as well as optical density at 680 nm (OD₆₈₀). However, the number of vegetative cells within a single filament of Anabaena grown at 30 ℃ was smaller than those grown at lower temperatures, due to the intercalary division of the filament. Of the three different cells comprising a single Anabaena filament, the vegetative cell marginally affects the growth of Anabaena. The main dimensions of the vegetative cell, i.e., length and width, depend on the temperature and growth stage. The length-to-width (L/W) ratios of vegetative cells and akinetes were relatively consistent regardless of the temperature. However, in vegetative cells with dichotomous growth, the L/W ratio shows clear differences depending on their growth stage. It has been demonstrated that the L/W ratio could be used as an indicator to indirectly predict the growth stage of on-sit Anabaena samples.

• ALGAE
• /
• 제18권2호
• /
• pp.177-181
• /
• 2003

Variation in seasonal growth, phenology and periodicity in spore shedding in Polysiphonia platycarpa $B{\oslash}rgesen$ occurring on the coast of Visakhapatnam, India, have been described to know the growth behaviour, reproductive periodicity and spore producing capacities. This alga occurs for a short period from December to May in the intertidal region of the Visakhapatnam coast, showing maximum growth during January/February. Tetrasporophytic, carposporophytic and antheridial plants were observed in all months of their occurrence in the field. But the vegetative plants were not seen in January and February and all the plants collected were reproductive. The tetraspore and carpospore shedding was observed during all the six months of their occurrence.

• Animal cells and systems
• /
• 제13권3호
• /
• pp.315-321
• /
• 2009

The growth and estimated production of Acanthogobius flavimanus (1.9${\sim}$24.7 cm TL) were investigated in an eelgrass bed and unvegetated tidal flat of Dongdae Bay, Korea from March 2006 to February 2007. Growth in fish total length was expressed by the von Bertalanffy's growth equation as: $L_t=43.238(1-e^{-03138(t+02507)})$. Estimated densities, biomass, daily and annual production, and P/B ratio were higher at eelgrass bed than those of at unvegetated tidal flat. Monthly variation in daily production was large; the peak numbers occurred in November 2006 ($0.0014g/m^2$/day) at eelgrass bed, whereas was $0.002g/m^2$/day in July 2006 at unvegetated tidal flat. The eelgrass bed has been supported to maintain capacity of higher production of A. flavimanus than those of in unvegetated tidal flat.

• 대한기계학회논문집B
• /
• 제27권2호
• /
• pp.265-273
• /
• 2003

Numerical analysis of bubble motion during nucleate boiling is performed by imposing a constant heat flux condition at the base of a heater which occurs in most of boiling experiments. The temporal and spatial variation of a solid surface temperature associated with the bubble growth and departure is investigated by solving a conjugate problem involving conduction in the solid. The vapor-liquid interface is tracked by a level set method which is modified to include the effects of phase change at the interface, contact angle at the wall and evaporative heat flux in a thin liquid micro-layer. Based on the numerical results, the bubble growth pattern and its interaction with the heating solid are discussed. Also, the effect of heating condition on the bubble growth under a micro-gravity condition is investigated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.182-187
• /
• 2000

The application of fracture mechanics have traditionally concentrated on cracks leaded by tensile stresses, and growing under an opening or mode I mechanism. However, many cases of failures occur from growth of cracks subjected to mixed mode loading. Several criteria have been proposed regarding the crack growth direction under mixed mode loadings. This paper is aimed at prediction of fatigue crack growth behaviour under mixed mode(I+II) in two dimensional branched type precrack. In this paper, the maximum tangential stress(MTS) criterion was used to predict crack growth direction. Not only experiment but also finite element analysis(FEA) was carried out. The theoretical predictions were compared with experimental results in this paper

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.67-72
• /
• 2003

Numerical calculation has been performed to investigate the effect of inlet configuration on the growth rate of GaN layer on the heated susceptor. The conventional single inlet, where the gas is mixed by force in the inlet, is compared with separated flow inlet. Two-parallel gas flow $H_{2}$ and $NH_{3}$ are separated by a plate with finite length which are also parallel to the susceptor. The effect of separated plate length, carrier gas and flow rate of each precursor on the mixing of reactant gases and growth rate were investigated. Furthermore the three dimensional model is employed to predict the transverse variation of growth rate.