• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.9-14
• /
• 2010

The present study was performed to identify the possibility of the disused paper-sludge to substitute an substrate for nursery plants. Tosilee substrate as control, paper-sludge and tosilee substrate (1:1, v:v), and paper sludge substate were used in this experiment. After harvesting tomato seedlings, there were no significant differences in growth parameters such as plant height, root length, and fresh and dry weight grown for tosilee substrate, and paper-sludge and tosilee mixture substrate. However, the seedlings grown for paper-sludge substrate alone were extremely depressed. These growth pattern was followed by cucumber seedlings. As the result of this experiment, we suggest that it must need to stabilize the pH and EC, and Zn concentration in paper-sludge for increasing its material for substrate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.4
• /
• pp.340-344
• /
• 2011

Thermoelectric bismuth telluride ($Bi_2Te_3$) films were deposited on $4^{\circ}$ off oriented (001) GaAs substrates using a modified metal organic chemical vapor deposition (MOCVD) system. The effects of substrate temperature on surface morphologies, crystallinity, electrical properties and thermoelctric properties were investigated. Two dimensional growth mode (2D) was observed at substrate temperature lower than $400^{\circ}C$. However, three dimensional growth mode (3D) was observed at substrate temperature higher than $400^{\circ}C$. Change of growth mechanism from 2D to 3D was confirmed with environmental scanning electron microscope (E-SEM) and X-ray diffraction analysis. Seebeck coefficients of all samples have negative values. This result indicates that $Bi_2Te_3$ films grown by modified MOCVD are n-type. The maximum value of Seebeck coefficient was -225 ${\mu}V/K$ and the power factor was $1.86{\times}10^{-3}\;W/mK^2$ at the substrate temperature of $400^{\circ}C$. $Bi_2Te_3$ films deposited using modified MOCVD can be used to fabricate high-performance thermoelectric devices.

• Journal of Mushroom
• /
• v.7 no.2
• /
• pp.45-48
• /
• 2009

This research was carried out to clarify the feasibility of using the banana leaf and stalk and water hyacinth by substrate of oyster mushroom. The 100% cotton, water hyacinth, banana leaf and stalk was used as a mushroom media respectively. The growth of fungi was observed after 15 days and showed 115mm in the cottonseed hull, 80mm in the water hyacinth, and 72mm in the banana leaf and stalk. In the mixed substrate that added water hyacinth to cottonseed hull with the rate of 20, 50, 80% the growth was observed with 115, 103, 62mm respectively. In case of the banana mixed substrate the results was appeared with 106, 89, 78mm respectively. In the pure substrate the cottonseed hull's mycelial growth was the fastest and in the case of mixed substrate with water hyacinth 20% and cotton 80% was the fastest growth.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.95-95
• /
• 2009

Single-crystalline Bi nanowires have motivated many researchers to investigate novel quasi-one-dimensional phenomena such as the wire-boundary scattering effect and quantum confinement effects due to their electron effective mass (~0.001 me). Single crystalline Bi nanowires were found to grow on as-sputtered films after thermal annealing at $270^{\circ}C$. This was facilitated by relaxation of stress between the film and the thermally oxidized Si substrate that originated from a mismatch of the thermal expansion. However, the method is known to produce relatively lower density of nanowires than that of other nanowire growth methods for device applications. In order to increase density of nanowire, we propose a method for enhancing compressive stress which is a driving force for nanowire growth. In this work, we report that the compressive stress can be controlled by modifying a substrate structure. A combination of photolithography and a reactive ion etching technique was used to fabricate patterns on a Si substrate. It was found that the nanowire density of a Bi film grown on $100{\mu}m{\times}100{\mu}m$ pattern Si substrate increased over seven times higher than that of a Bi sample grown on a normal substrate. Our results show that density of nanowire can be enhanced by sidewall effect in optimized proper pattern sizes for the Bi nanowire growth.

• Journal of Surface Science and Engineering
• /
• v.35 no.1
• /
• pp.33-38
• /
• 2002

For the evaluation of nucleation and growth behaviors influenced by substrate properties, such as surface energy, structure and electrical properties, chromium nitride films (CrN) were deposited on various substrates (glass, AISI 1040 steel and Si (110) by unbalanced magnetron sputtering. X-ray diffraction and Atomic Force Microscopy (AFM) were used to study the microstructure and grain growth as a function of deposition time. The diffraction patterns of CrN thin films deposited on Si (110) exhibited crystalline structure with highly preferred orientation of (200) plane parallel to the substrate, whereas the films deposited on glass and AISI 1040 exhibited preferred orientations (200) and minor orientation (111), (311) or (220) plane. The orientation of films deposited both on glass and Si substrates did not depend on the bias voltage (Vs). The grain growth and structure of film deposited on AISI 1040 steel substrate are strongly influenced by the substrate bias in comparison with that deposited onto glass and Si substrates. The differences in the structure and grain growth of CrN films deposited onto different substrates are predominantly related to the properties of the substrate (structure and electrical conductivity).

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.5
• /
• pp.239-244
• /
• 2021

Following Silicon Carbide, single crystal diamond continues to attract attention as a next-generation semiconductor substrate material. In addition to excellent physical properties, large area and productivity are very important for semiconductor substrate materials. Research on the increase in area and productivity of single crystal diamonds has been carried out using various devices such as HPHT (High Pressure High Temperature) and MPECVD (Microwave Plasma Enhanced Chemical Vapor Deposition). We hit the limits of growth rate and internal defects. However, HFCVD (Hot Filament Chemical Vapor Deposition) can be replaced due to the previous problem. In this study, HFCVD confirmed the distance between the substrate and the filament, the accompanying growth rate, the surface shape, and the Raman shift of the substrate after vapor deposition according to the vapor deposition temperature change. As a result, it was confirmed that the difference in the growth rate of the single crystal substrate due to the change in the vapor deposition temperature was gained up to 5 times, and that as the vapor deposition temperature increased, a large amount of polycrystalline diamond tended to be generated on the surface.

• Korean Journal of Organic Agriculture
• /
• v.6 no.1
• /
• pp.109-116
• /
• 1997

This experiment was carried out to examine the effect of various functional materials such as bioceramic podwers, crushed shells and elvanites supplemented to the each substrate on the seedlings growth of cucumber, watermelon and tomato. The seedlings were grown in pots filled with substrates of bioceramic podwers, crushed shell and elvanites. The growth of cucumber seedlings in terms of plant height, stem diameter, leaf width, leaf area, plant fresh and dry weight was promoted by adding the bioceramic. powder (1 to 2g/kg), crushed shells (20 to 80g/kg) or elvanites (20 to 80g/kg). Watermelon seedlings in terms of plant height, number of leaves and leaf area were greater than those of the control by adding bioceramics (1 to 2g/kg). Plant height was also promoted by the adding of bioceramic power from 16 days after treatment. But leaf area was increased from 8 days after treatment, while stem diameter was not affected. Watermelon seedlings were also influenced by adding curshed shells (20 to 80g/kg) and elvanites (20 to 40g/kg) into each substrate. The growth of characteristics of tomato seedlings were promoted by adding 1 to 3g/kg of bioceramics, 10 to 80g/kg of crushed shell or 20 to 40g/kg of elvanites, respectively. Especially, root growth was greatly influenced by bioceramic powder, whereas the shoot growth(leaves and stem) was stimulated by crushed shells and elvanites suppemented into substrate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.3
• /
• pp.273-279
• /
• 1999

The home-made hot wall epitaxy (HWE) system was utilized for GaN epitaxial layer growth on the Si(001) substrate. It was appeared that GaN epilayer grow with mixed phase of Zinc blende and Wurtzite structure from photoluminescence (PL) and x-ray diffraction (XRD) analysis at the room temperature. We found that intial growth layer has Wurtzite structure from photoluminescence (PL) and x-ray diffractio (XRD) analyses at the room temperature. Wefound that initial growth layer has Wurtzite structure when initial deposition time, the temperature of substrate and source are 4 min, $720^{\circ}C$ and $860^{\circ}C$ respectively, and at the epi growth process GaN, epilayer was grown with relatively stable Wurtzite structure when the temperature of substrate and source are $1020^{\circ}C$ and $910^{\circ}C$ respectively.

• Journal of Surface Science and Engineering
• /
• v.50 no.5
• /
• pp.352-359
• /
• 2017

The growth of nanocrystalline diamond films on a p-type poly silicon substrate was studied using microwave plasma chemical vapor deposition method. A 6 mm thick poly silicon plate was mirror polished and scratched in an ultrasonic bath containing slurries made of 30 cc ethanol and 1 gram of diamond powders having different sizes between 5 and 200 nm. Upon diamond deposition, the specimen scratched in a slurry with the smallest size of diamond powder exhibited the highest diamond particle density and, in turn, fastest diamond film growth rate. Diamond deposition was carried out applying different DC bias voltages (0, -50, -100, -150, -200 V) to the substrate. In the early stage of diamond deposition up to 2 h, the effect of voltage bias was not prominent probably because the diamond nucleation was retarded by ion bombardment onto the substrate. After 4 h of deposition, the film growth rate increased with the modest bias of -100 V and -150 V. With a bigger bias condition(-200 V), the growth rate decreased possibly due to the excessive ion bombardment on the substrate. The film grown under -150V bias exhibited the lowest contact angle and the highest surface roughness, which implied the most hydrophilic surface among the prepared samples. The film growth rate increased with the apparent activation energy of 21.04 kJ/mol as the deposition temperature increased in the range of $300{\sim}600^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.327.1-327.1
• /
• 2014

Nitrides-on-silicon structures are considered to be an excellent candidate for unique design architectures and creating devices for high-power applications. Therefore, a lot of effort has been concentrating on growing high-quality III-nitrides on Si substrates, mostly Si(111) and Si(001) substrates. However, there are several fundamental problems in the growth of nitride compound semiconductors on silicon. First, the large difference in lattice constants and thermal expansion coefficients will lead to misfit dislocation and stress in the epitaxial films. Second, the growth of polar compounds on a non-polar substrate can lead to antiphase domains or other defective structures. Even though the lattice mismatches are reached to 16.9 % to GaN and 19 % to AlN and a number of dislocations are originated, Si(111) has been selected as the substrate for the epitaxial growth of nitrides because it is always favored due to its three-fold symmetry at the surface, which gives a good rotational matching for the six-fold symmetry of the wurtzite structure of nitrides. Also, Si(001) has been used for the growth of nitrides due to a possible integration of nitride devices with silicon technology despite a four-fold symmetry and a surface reconstruction. Moreover, Si(110), one of surface orientations used in the silicon technology, begins to attract attention as a substrate for the epitaxial growth of nitrides due to an interesting interface structure. In this system, the close lattice match along the [-1100]AlN/[001]Si direction promotes the faster growth along a particular crystal orientation. However, there are insufficient until now on the studies for the growth of nitride compound semiconductors on Si(110) substrate from a microstructural point of view. In this work, the microstructural properties of nitride thin layers grown on Si(110) have been characterized using various TEM techniques. The main purpose of this study was to understand the atomic structure and the strain behavior of III-nitrides grown on Si(110) substrate by molecular beam epitaxy (MBE). Insight gained at the microscopic level regarding how thin layer grows at the interface is essential for the growth of high quality thin films for various applications.