• 한국조경학회지
• /
• 제42권6호
• /
• pp.50-59
• /
• 2014

이 연구는 식생모듈박스에 적용한 레플렉숨을 중심으로 식물 생육특성 간의 관계 및 식물의 생육특성과 토양 물리적 특성의 관계를 파악하기 위하여 수행하였다. 이 실험에서 토양 물리적 특성과 식물 생육특성의 관계에 관한 연구의 분석은 SPSS Ver 19.0 for Window용 통계프로그램을 이용하여, 상관분석과 다중회귀분석을 실시하였다. 토양 물리적 특성과 생육특성의 다중회귀 분석 결과, 레플렉숨에 대한 회귀식은 초장=$3.993-14.070^*$(용적밀도)+$.233^*$(고상)+$.038^*$(액상)+$.068^*$(침투율)로 나타났으며, 이 중 용적밀도와 고상이 유의성 있게 나타났다. 레플렉숨에 대한 회귀식은 초폭=$2.931-33.925^*$(용적밀도)+$.566^*$(고상)+$.206^*$(액상)+$.027^*$(침투율)이며, 이 중 용적밀도와 고상이 유의성 있게 나타났다. 즉, 초장 및초폭과 토양의 물리적 특성은 일정한 회귀식으로 작성할 수 있다. 상하부 생체량과 건중량은 토양의 물리적 특성과 직접적인 상관성이 없는 것으로 나타났다.

• 한국주조공학회지
• /
• 제6권1호
• /
• pp.12-19
• /
• 1986

This study was undertaken to understand the formation mechanism of the hard spots in high strength brass. To investigate the behavior of the hard spots in the isothermal liquid state with varying silicon content, the rapidly quenched specimens were obtained by suctioning the melt into the silica tube and water quenching. To examine the growth process of the hard spots with holding time, the unidirectional solidification technique was used. The results of this study are summarized as follows: 1) With the addition of Fe in order to get the effects of grain refinement in high strength brass, the two different type of Fe-rich phases are occurred, which are defined as dendritic and globular phase. The chemical composition of the globular phase was different from that of the dendritic phase in that the globular phase contained Si. 2) With increasing Si content, the Fe-rich phase had a tendency to form globular phase. 3) As the holding time increased in the liquid state, globular was also prone to coalesce. The further growth of globular phase to large size was due to reducing the interfacial energy. 4) The primary phase of copper alloy was nucleated preferentially on the dendritic phase. It was noticeable that the dendritic phase acted as a grain refiner. However, the agglomerate (hard spots) which was composed of the globular phase decreased the mechanical properties of high strength brass. 5) Once the hard spots formed in the high strength brass casting, it was very difficult to remove them. This is due to the fact that their meting temperature is higher than the pouring temperature of high strength brass.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.528-528
• /
• 1996

• 한국동물위생학회지
• /
• 제30권3호
• /
• pp.291-304
• /
• 2007

Mutants of an obligate aerobic bacterium, Vitreoscilla, that have deficiency in heat-labile catalase-peroxidase hydroperoxidase I (HPI) were created by EMS treatment. The catalase-peroxidase HPI-deficient mutant showed substantially lower peroxidase activity in exponential and mid-stationary phase compared with the wild type strain. In late stationary phase, the mutant exhibited no peroxidase activity. Peroxidase deficiency in the mutant was revealed by polyacrylamide gels stained for peroxidase activity. Characteristically, catalase levels in the mutant increased about 14- and 8-fold during growth in the exponential and stationary phases, respectively, compared to those in the wild type, suggesting a compensatory effect for protection from $H_2O_2$ toxicity. The mutant showed differences in physiology from the wild type: retardation in growth rate and decrease in oxygen consumption. Both the wild type and the catalase-peroxidase HPI-deficient mutant of Vitreoscilla had lower growth rates in media containing increasing $H_2O_2$ concentrations. However, the mutant exhibited an additionally decreased growth rate after 6 to 8 h of growth compared to the wild type. The wild type was resistent up to 20 mM $H_2O_2$, whereas the mutant was very sensitive to high concentrations of exogenous $H_2O_2$. Although elevated catalase levels would provide protection of the bacteria from the deleterious effect of $H_2O_2$, it did not appear to be complete. Cell-free extracts of the mutant showed decreased NADH oxidation rates and higher accumulation of $H_2O_2$ during this oxidation. These results may account for the impaired growth and earlier onset of death phase by the catalase-peroxidase HPI-deficient mutant of Vitreoscilla.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.463-469
• /
• 1999

$K_3$$Li_2$$Nb_5$$O_{15}$KLN) 단결정을 $K_x$$Li_{1-x}$$NbO_3$의 조성에서 x= 0.04~0.6으로 결정성장방법으로 성장시켰다. 균열이 없는 양질의 결정성장을 위해 c축 및 a축 방향을 택하였고, 단결정 성장을 위한 최적의 조건에 대하여 연구하였다. 성장된 결정은 편광현미경 관찰을 통해 일축성 무늬를 볼수 있었고, X-선 회절실험에서 결정된 격자상수는 a=b=12.500 $\AA$, c=3.996$\AA$이었으며, 1HF : $2HNO_3$ 용액의 부식에서 c축 방향으로 정사각형 및 a축 방향으로 직사각형의 부식상을 볼수 있었다. 광투과율 측정과 온도에 따른 유전상수 측정등을 통해 KLN 결정의 광학적 특성 및 다른 조성을 갖는 시료에서 유전특성을 조사하였다. $420^{\circ}C$에서 상전이 온도를 갖는 결정은 확산상전이(diffuse phase transition) 특성을 갖는 반면 $493^{\circ}C$에서 상전이 온도를 보이는 결정은 날카로운(shap) 유전특성을 나타내었다.

• 한국미생물·생명공학회지
• /
• 제9권4호
• /
• pp.225-230
• /
• 1981

The kinetic study of rifamycin B production in batch culture of Nocardia mediterranei was undertaken in part of our endeavor to optimize the fermentation condition. The growth parameters such as $\mu$$_{m}$ and Ks values for nitrogen source were evaluated by employing Monod equation. From the experiments, $\mu$$_{m}$ and Ks were 0.15hr$^{-1}$ and 8.35g/1, respectively. The growth kinetics in batch culture was found successfully interpreted by logistic law, i.e., the initial specific growth rate and the maximum cell mass concentration were determined as function of pH and both found to have maxima. For the production of rifamycin B, a non-growth associated production kinetics was employed and the specific productivity as a function of pH was found to have two maximum points. The yield coefficient and the specific productivity were calculated as mean values in production phase. Utilizing these experimental data as a function of pH, the optimal condition for the rifamycin B production was discussed with regad to the pH effect on the cell growth and production of the antibiotic. As a result, growth phase at pH 6.5 and production phase at pH 7.0 were found to be recommended.ded.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.343-350
• /
• 2003

Using Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ powders prepared by solid state reaction and spray drying method, the nucleation and growth behaviors of superconducting and second phases were investigated during isothermal heat treatment. When the spray drying power was used in contrast with solid state reaction powder, Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ (2223) phase could be formed at the relatively shot time and second phases were much bigger. Quantitative analysis showed that as the heat treatment time increased, more Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ (2212) changed to 2223 and the major second phase was changed from (Sr,Ca)$_{14}$Cu$_{24}$ $O_{x}$(14:24) to (Sr,Ca)$_2$Cu$_1$ $O_{x}$ (2:l). The superconducting phase formed at the relatively short time 14:24 phase. Following the Bi-free phase of 14:24 Phase, but long time was needed in places far from the 14:24 phase. Following the formation of the 2212 phase near the 14:24 phase, the 2223 phase nucleated preferentially at the interface between the 2212 and 14:24 phases. The preferential nuclcation of 2223 was explained by its structural similarity and low Interfacial energy with both the Bi-free and 2212 Phases.12 Phases.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.483-490
• /
• 1997

Al2O3/metal composites were fabricated by oxidation and reaction of molten Al-alloy into two types of commercial Al2O3-SiO2 fibrous insulation board. The growth rate, composition and microstructure of these materials were described. An AlZnMg(7075) alloy was selected as a parent alloy. Mixed polycrystalline fiber and glass phase fiber were used as a filler. The growth surface of an alloy was covered with and without SiO2. SiO2 powder was employed as a surface dopant to aid initial oxidation of Al-alloy. Al-alloy, SiO2, fiber block and growth inhibitor CaSiO3 were packed sequentially in a alumina crucible and oxidized in air at temperature range 90$0^{\circ}C$ to 120$0^{\circ}C$. The growth rate of composite layer was calculated by measuring the mass increasement(g) per unit surface($\textrm{cm}^2$). XRD and optical microscope were used to investigate the composition and phase of composites. The composite grown at 120$0^{\circ}C$ and with SiO2 dopant showed rapid growth rate. The growth behavior differed a little depending on the types of fiber used. The composites consist of $\alpha$-Al2O3, Al, Si and pore. The composite grown at 100$0^{\circ}C$ exhibited better microstructure compared to that grown at 120$0^{\circ}C$.

• 대한기계학회논문집B
• /
• 제30권11호
• /
• pp.1107-1116
• /
• 2006

The droplet ejection process driven by an evaporating bubble in a thermal inkjet printhead is investigated by numerically solving the conservation equations for mass, momentum and energy. The phase interfaces are tracked by a level set method which is modified to include the effect of phase change at the interface and extended for multiphase flows with irregular solid boundaries. The compressibility effect of a bubble is also included in the analysis to appropriately describe the bubble expansion behaviour associated with the high pressure caused by bubble nucleation. The whole process of bubble growth and collapse as well as droplet ejection during thermal inkjet printing is simulated without employing a simplified semi-empirical bubble growth model. Based on the numerical results, the jet breaking and droplet formation behaviour is observed to depend strongly on the bubble growth and collapse pattern. Also, the effects of liquid viscosity, surface tension and nozzle geometry are quantified from the calculated bubble growth rate and ink droplet ejection distance.

• Journal of Plant Biology
• /
• 제20권2호
• /
• pp.63-69
• /
• 1977

Experiments were conducted to investigate the effects of several hormones on the growth of suspension culture of carrot (Daucus carota L.) cells, where changes in pH and the amount of $NH_4-Nin$ the medium were observed with regard to growth. A treatment with 2,4-D at $10^{-5}M$ resulted in a highest rate of growth; the hormone at this concentration caused an increase in dry weight by about 40 to 50% over the control, measured at a stationary phase. It was thus indicated that 2,4-D at $10^{-5}M$ provided the optimal condition for the suspension culture. Changes in pH of the medium were found to be affected by hormonal treatments during the first 2-3 days following the inoculation, after which the pattern of pH changes in hormone enriched media paralleled that of the control. Subsequent changes of $NH_4-N and NO_3-N$ from the medium by the cells, and also by growth of the cells. The uptake of $NH_4-N$ by the cells did not appear to be influenced by hormonal treatments. At a stationary phase, a considerable amout of $NO_3-N$ played a more important role than $NH_4-N$ in the growth of the carrot cell suspension culture.