• 한국해양공학회지
• /
• 제14권3호
• /
• pp.78-83
• /
• 2000

In this study, CT specimens were prepared from AST SA516 Gr. 70 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at 25$^{\circ}C $, -60$^{\circ}C $, -80$^{\circ}C $ and -100$^{\circ}C $ and in the range of stress ratio of 0.05, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ${\delta} K_{th}$ in the early stage of fatigue crack growth (Region I) and stress intensity factor range $\delta $K in the stable of fatigue crack growth (Region II) were increased in proportion to descending temperature. It was assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN -$\delta $K in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It was assumed that the fatigue crack growth rate da/dN is rapid in proportion to descending temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.326-331
• /
• 2001

In this study. CT specimens were prepared from ASME SA5l6 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -10$0^{\circ}C$ and -12$0^{\circ}C$ in the range of stress ratio of 0.1 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ΔKsub/th/ in the early stage of fatigue crack growth ( Region I) and stress intensity factor range ΔK in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da.dN -ΔK in RegionII, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• Interaction and multiscale mechanics
• /
• 제1권3호
• /
• pp.369-379
• /
• 2008

A combined stochastic diffusion and mean-field model is developed for a systematic study of the grain growth in a pure single-phase polycrystalline material. A corresponding Fokker-Planck continuity equation is formulated, and the interplay/competition of stochastic and curvature-driven mechanisms is investigated. Finite difference results show that the stochastic diffusion coefficient has a strong effect on the growth of small grains in the early stage in both two-dimensional columnar and three-dimensional grain systems, and the corresponding growth exponents are ~0.33 and ~0.25, respectively. With the increase in grain size, the deterministic curvature-driven mechanism becomes dominant and the growth exponent is close to 0.5. The transition ranges between these two mechanisms are about 2-26 and 2-15 nm with boundary energy of 0.01-1 J $m^{-2}$ in two- and three-dimensional systems, respectively. The grain size distribution of a three-dimensional system changes dramatically with increasing time, while it changes a little in a two-dimensional system. The grain size distribution from the combined model is consistent with experimental data available.

• 한국식품과학회지
• /
• 제20권1호
• /
• pp.13-18
• /
• 1988

1% 희석 쌀전분 용액의 노화 특성을 호화후 $5^{\circ}C$에서 저장하면서 고찰하였다. 저장기간이 증가함에 따라 노화도도 증가하였는데 그 증가하는 정도는 노화 초기에 가장 현저한 반면 노화가 진행됨에 따라 감소하였다. 추정 전분의 노화특성을 Avrami식으로 해석하여 노화기작을 살펴본 결과 Avrami지수, 속도상수, 시간상수는 각각 0.96, 0.21 $days^{-1}$, 4.77 days 였다. 이때 Avrami지수가 단위치(n=1)에 접근하므로 희석 쌀전분 용액은 즉각적인 핵형성에 이은 간상구조의 생성에 의하여 노화가 진행됨을 알 수 있었다. 주사 전자 현미경에 의하여 노화과정을 관찰한결과 노화기간이 경과함에 따라 생전분과는 다른 형태의 3차원 결정구조가 형성됨을 알 수 있었다.

• 한국재료학회지
• /
• 제14권6호
• /
• pp.420-424
• /
• 2004

The microstructure and electrical properties of $ZnO-Pr_{6}$$O_{11}$ $-CoO-Y_2$$O_3$-based varistors were investigated with and without various metal oxide additives (NiO, MgO, and $Cr_2$$O_3$). The addition of NiO promoted the grain growth while that of Cr$_2$O$_3$ decreased average grain size. Thereby, the varistor voltage was higher in $Cr_2$$O_3$-added composition. Among $ZnO-Pr_{6}$ $O_{11}$ /$-CoO-Y_2$$O_3$-based varistors, the$ Cr_2$$O_3$-added varistor exhibited the highest nonlinear exponent (51.2), the lowest leakage current (1.3 $\mu$A), and the lowest dielectric dissipation factor (0.0433).

• Journal of Welding and Joining
• /
• 제7권1호
• /
• pp.51-58
• /
• 1989

The purpose of this study is to investigate the corrosion fatigue crack growth of PWTHT specimens(SS41, SM53B) which are the compact tension ones extracted from the muti-passed weldment and weld block. The corrosion fatigue test was done at the cyclic stress frequency of 3Hz in 3.5% NaCl solution. The results are as follows. 1. Corrosion fatigue crack growth of as-weld was slower than that of base metal. 2. In the low .DELTA.K region, the effect of corrosion environment on crack growth was obvious. However, the corrosion effect decreased with the .DELTA.K slowly. 3. The behaviour of fatigue and corrosion fatigue crack growth depended on the material, heat treatment as well as experimental conditions. 4. Corrosion fatigue crack growth of PWHT specimens(SS41, SM53B) subjected to 1/4hr, was increased compared with that of as-weld. 5. There was a tendency that the exponent value(m) obtained in 3.5% NaCl solution was decreased in comparison with that in air, and the material constant(C)was increased for Paris equation, da/dN=C((.DELTA.K))$^{m}$ , compared with that in air considerably.

• Journal of Welding and Joining
• /
• 제20권1호
• /
• pp.97-102
• /
• 2002

The growth kinetics of intermetallic compound layers formed between the eutectic Sn-3.5Ag solder and the Cu and Ni/Cu pad by solid stateisothermal aging were examined. The interfacial reaction between the eutectic Sn-3.5Ag solder and the Cu and Ni/Cu pad was investigated at 70, 120, 150, $170^{\circ}C$ for various times. The intermetallic compound layer was composed of two phase: $Cu_6Sn_5$(${\varepsilon}-phase$) adjacent to the solder and $Cu_6Sn_5$(${\varepsilon}-phase$) adjacent to the copper and on solder/Ni pad the intermetallic compound layer was $Ni_3Sn_4$. Because the values of time exponent(n) have approximately 0.5, the layer growth of the intermetallic compound was mainly controlled by volume diffusion over the temperature range studied. The apparent activation energy for layer growth of total Cu-Sn($Cu_6Sn_5 + Cu_6Sn$), $Cu_6Sn_5$, $Cu_3Sn$ and $Ni_3Sn_4$ intermetallic compound were 64.82kJ/mol, 48.53kJ/mol, 89.06kJ/mol and 71.08kJ/mol, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권12호
• /
• pp.1756-1760
• /
• 2016

Estimation of feed intake (FI) for individual animals within a pen is needed in situations where more than one animal share a feeder during feeding trials. A partitioning method (PM) was previously published as a model to estimate the individual FI (IFI). Briefly, the IFI of a pig within the pen was calculated by partitioning IFI into IFI for maintenance ($IFI_m$) and IFI for growth. In the PM, $IFI_m$ is determined based on the metabolic body weight (BW), which is calculated using the coefficient of 106 and exponent of 0.75. Two simulation studies were conducted to test the hypothesis that the use of different coefficients and exponents for metabolic BW to calculate $IFI_m$ improves the accuracy of the estimates of IFI for pigs, and that PM is applied to pigs fed in group-housing systems. The accuracy of prediction represented by difference between actual and estimated IFI was compared using PM, ratio (RM), or averaging method (AM). In simulation studies 1 and 2, the PM estimated IFI better than the AM and RM during most of the periods (p<0.05). The use of 0.60 as the exponent and the coefficient of 197 to calculate metabolic BW did not improve the accuracy of the IFI estimates in both simulation studies 1 and 2. The results imply that the use of $197kcal{\times}kg\;BW^{0.60}$ as metabolizable energy for maintenance in PM does not improve the accuracy of IFI estimations compared with the use of $106kcal{\times}kg\;BW^{0.75}$ and that the PM estimates the IFI of pigs with greater accuracy compared with the averaging or ratio methods in group-housing systems.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1102-1113
• /
• 2005

The propose of this study is to develop the optimal sizing system of ready-to-wear f3r elementary school girls using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school girls between 6 to 12 years old. The statistical method were 1) The total of 11 height groups, which size interval from one another is 6 cm that is an average height gap between each age. 2) In order to determine an approximate figure (m ${\times}$ n) to establish the appropriate sizes far each height group that fit to the combinations of bust and hip girth, which based on their means and standard deviations on the probability density curve to produce the standard normal distribution. 3) m and n were aligned by 4cm -the grading increments used for patterns making- and determined the size ranges by confirming the approximate figures of m and n. 4) The representative values were determined by an area ratio calculated by dividing the area determined from the range of bust and hip girth with the representative value. Considering the characteristics of subjects' distribution, the area ratios was used. 5) Weight was calculated by seeking a growth exponent for each age and multiplying it by the number of girls that fit to each size range. As sections that show the highest weight are more likely sought by the consumers, these sections were determined as the optimal size standards. 6) This optimal sizing system consists of sizes determined by the optimal size standards and its sizes are marked with height, bust and hip girth.

• 한국의류학회지
• /
• 제31권3호
• /
• pp.364-375
• /
• 2007

The propose of this study is to develop the optimal sizing system of ready-to-wear far elementary school boys using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school boys between 7 to 12 yeiws old. The results were as follows: 1. Height group includes 9 types of heights: 115, 120, 125, 130, 135, 140, 145, 150 and 155. 2. In the case of short children's groups, the variance in bust girth and waist girth is narrow. The people cluster together around the average. The size deviation of ready-to-wear is small. 3. In the case of tall children's groups, the variance in bust girth and waist girth is wide. The people spread widely around the average. The size deviation of ready-to-wear is large. 4. The optimal size system is suggested considering the weight of growth exponent of children according to their respective ages. Clothing companies can selectively choose sizes that meet the target of their brands. 5. It suggests the body sizes chart, which based on their means by the middle size children for each height group, so that clothing companies make use of it.