• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.467-472
• /
• 2003

Of those off-road diesel engines, the railroad diesel rolling stocks (RDRS) for passenger and freight transportation become a growing issue since they are emitting enormous amounts of various air pollutants. Furthermore, up to the present time, emissions from these sources are not well controlled. One of main purposes in this study is to develop emission factors for the RDRS and to estimate a total amount of major air pollutants from the RDRS in Korea. Prior to develop a Korean mode emission factor, the emission factor from the USEPA was simply applied for comparative studies. As a conclusion, based on the emissions calculated from both the USEPA mode and the KoRail mode, the RDRS is considered as one of significant mobile sources of major air pollutants including NOx and CO, and thus management plans and control strategies for the RDRS must be established to improve air quality near. future in Korea.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.2
• /
• pp.42-49
• /
• 2002

Recently, relative importance of the discount store is growing more and, as a life style of consumers changes, and foreign discount store is prosperous. This purpose of the research have a thorough grasp of the physical environment and the influencing variables. This paper was based on data which were collected from a self-administered structured questionnaire and statistical analysis were used. The contents of the research is following ; (1) Consumer's recognition difference verification of each discount store according to the T-test. (2) The Relation analysis between perceptional physical environment and service satisfaction. (3) This paper will suggest effective marketing methods according to the factor of satisfaction

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.226-228
• /
• 2005

This paper presents the single-stage High Power Factor TTFC(Two-Transistor Forward Converter). Recently, due to growing concern about the harmonic pollution of power distribution systems and the adoption of standards such as ICE 61000-3-2 and IEEE 519, There is a need to reduce the harmonic contests of AC line currents of power supplies. This research proposed the single-stage two switch forward circuit for low voltage and high current output.

• Molecules and Cells
• /
• v.42 no.3
• /
• pp.200-209
• /
• 2019

Embryonic stem cells (ESCs) and induced pluripotent stem cells (iPSCs) have been used as promising tools for regenerative medicine, disease modeling, and drug screening. Traditional and common strategies for pluripotent stem cell (PSC) differentiation toward disease-relevant cell types depend on sequential treatment of signaling molecules identified based on knowledge of developmental biology. However, these strategies suffer from low purity, inefficiency, and time-consuming culture conditions. A growing body of recent research has shown efficient cell fate reprogramming by forced expression of single or multiple transcription factors. Here, we review transcription factor-directed differentiation methods of PSCs toward neural, muscle, liver, and pancreatic endocrine cells. Potential applications and limitations are also discussed in order to establish future directions of this technique for therapeutic purposes.

• KDI Journal of Economic Policy
• /
• v.46 no.1
• /
• pp.1-19
• /
• 2024

This paper evaluates explanations for China's growth slowdown. The natural tendency for rapidly growing economies to slow down is a major factor, along with problems bequeathed by unbalanced growth, including a declining ICOR, slowing total factor productivity growth, and rising indebtedness. A number of other mechanisms are of lesser importance: demographics, President Xi's centralization of political power and anti-corruption campaign, and U.S. export controls. Sustaining growth in the longer term will require China to step away from investment, debt and export-fueled growth in favor of a balanced growth model with household consumption playing a larger role. Doing so will require hardening of the budget constraints of regional and local governments and restructuring of the nonperforming debts of property and construction companies.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.175-187
• /
• 1999

The notion of productivity has been extended from the quantitative change of input factors to the efficiency change meaning efficient use of resources, and to the technical change meaning the qualitative improvement of input resources. In this way, the technical change is termed as total factor productivity in the individual businesses or the manufacturing industries. They should efficiently respond to the variations of economic environment and at the same time, have to make the efforts to improve productivity by increasing managerial efficiency and rasing the level of technology change for the continuous growth. Considering the growing importance of productivity, this study closely examines the factors influctuation on the productivity, fluctuation using total factor productivity in korean manufacturing industries. For the objective this study investigates the methods of measurement about total factor productivity, establishes the hypotheses based on the preceding research and finding. The results are obtained through the examination on the outcoms of regression analysis and related data. The results can be summarized as follows, First, in the progress of korean industrialization, the qualitative growth does not depend on the total factor productivity of the technical advance, and does not lead to the industry expansion. That is, the contribution of total factor productivity turns out to be relatively low. Second, it is necessary for the manufacturing industry to improve the level of technology and to emphasize the innovation of business, since the capital investment does not completely become fixed in the growth rate of productivity. Finally, continuous R&D investment should be made to increase total factor productivity. Namely, the regulation of industrial structure with an intensive technical development is essential and should be based on scientific and technical knowledge.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.111-120
• /
• 2021

A tractor is an agricultural machine that performs farm work, such as cultivation, soil preparation, loading, bailing, and transporting, through attached working implements. Farm work must be carried out on time per the growing season of crops. As a result, the reliability of a tractor's transmission is vital. Ideally, the transmission's design should reflect the actual load during agricultural work; however, configuring such a measurement system is time- and cost-intensive. The design and analysis of a transmission are, therefore, mainly performed by empirical methods. In this study, a tractor with a measurement system was used to measure the actual working load in the field. Its hydro-mechanical transmission was then analyzed using the measured load. It was found that the velocity factor, load distribution factor, lubrication factor, roughness factor, relative notch sensitivity factor, and life factor affect the gear strength of the transmission. Also, loading conditions have a significant influence on the reliability of the transmission. It is believed that transmission reliability can be enhanced by analyzing the actual load on the transmission, as performed in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.168-179
• /
• 1982

The first step to utilize the growing resources of Italian poplar (Populus euramericana I-476) for pulp-Woods, its characteristics and adaptabilities to the pulp industry must be investigated completely. The plantation methods are important for its fast growing in stock, and no less important is the cutting age for its utilization as pulpwood. In this paper, the stone groundwood pulping, refiner groundwood pulping and chemi-groundwood pulping characteristics by the age of tree, along with their physical and chemical characterstics were tested, and relationships between the age groups were analyzed to find out the optimum felling age. The results obtained are as follows: 1. The coefficient of pliability was a little higher in the case of younger trees. 2. The water retention value of each pulp was directly proportional to its physical strength, but this tendency was not detected between the age groups of sample woods. 3. Generally, the physical strength of younger wood pulp was lower regardless of the pulping process. But in the case of pretreatment with NaOH, Asphund and CGP pulp from 5 year old sample wood were stronger in physical strengths than those of GP and Asplund pulp with no pretreatment from 10 years old sample wood. 4. The tear factor of Asplund pulp with alkali pretreatment was higher than that of CGP pulp but the breaking length and the burst factor was similar in all processes. Considering the pulp yield and its brightness, CGP process seems to be advantageous. 5. The dissimilarity of physical strength between 7 and 10 years old wood pulp was not very large in all pulping processes but the physical strength of 5 year old wood pulp was very weak. In the of groundwood pulping from Italian poplar woods, 5 year old wood pulp should be mixed with other long fiber pulp for making a good paper.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.10
• /
• pp.1393-1398
• /
• 2011

Four 4-month old Charolais${\times}$Dorset male sheep (initial liveweight $25.0{\pm}1.1\;kg$), fitted with rumen and abomasal fistulas and nourished by total intragastric infusions, were used to study the relationships between methionine (Met) supply, nitrogen (N) retention and plasma insulin-like growth factor-I (IGF-I). Four graded levels of Met, i.e. 0 g/16 g N, 1.76 g/16 g N, 3.52 g/16 g N and 7.04 g/16 g N, were infused into abomasums as experimental treatments. The sheep and treatments were allocated in a $4{\times}3$ incomplete Latin square design (Yudon square design). The experiment lasted 3 periods and each period was 10 days. Quadratic correlations were found between Met level (x, g/16 g N) and N retention (y, g/d): y = $-0.03x^2$+0.41x+2.62, $r^2$ = 0.66, n = 12, p = 0.008, and between methionine level (x, g/16 g N) and plasma IGF-I concentration (y, ng/ml): y = $0.80x^2$-4.53x+190.24, $r^2$ = 0.51, n = 12, p = 0.009. No significant correlation was found between plasma IGF-I (x, ng/ml) and N retention (y, g/d) (p>0.05). It was concluded that Met level had a significant influence on N retention and plasma IGF-I concentration whereas IGF-I might not be an important mediator in the regulation of N metabolism by Met in growing sheep nourished by total intragastric infusions.

• Clinical and Experimental Pediatrics
• /
• v.55 no.2
• /
• pp.54-57
• /
• 2012

Purpose: Somatic growth is an important indicator of health in children. Adequate organ growth is essential in growth and directly related to body growth. We consider renal length as a surrogate of organ growth in growing children. Measurement of weight, height, and many anthropometric indices, such as body surface area (BSA), body mass index (BMI), and Rohrer and Kaup indices, are used to evaluate growth status. The aim of this study was to evaluate the association between renal length and somatic parameters and analyze the affecting factors for renal size during growth. Methods: The data for renal length in 66 children (age, $12.9{\pm}15.6$ months; male/female, 34/32) were obtained. Each kidney was measured with ultrasonography and dimercaptosuccinic acid scan. The data on age, sex, height, and weight were obtained from the medical records. BSA, BMI, and Rohrer and Kaup indices were calculated from measured height and weight. BSA was calculated by 2 methods, and is expressed as BSA I and BSA II. Results: There were significant correlations between renal size and age, weight, height, BSA I, BSA II, and Rohrer index. In the regression analysis, the most significant contributing factor to renal growth was height ($R^2$=0.636, $P$ <0.001). Conclusion: Height seems to be the most important factor associated with organ growth in growing children. Further studies to evaluate adequate organ growth should be carried out.