• Korean Journal of Human Ecology
• /
• v.19 no.2
• /
• pp.245-256
• /
• 2010

The purpose of this study is on the effect of the Baduk play activity upon a child's intelligence, problem solving and delay of gratification. 68 participants (36 from the test group and 32 from the regulation group) were selected from 5 year old children who attend two elementary school annexed kindergartens for a pre-test and post-test in order to verify the effect of the Baduk play activity. The Baduk play activity was applied to the test group 3 times a week from the 3rd week of March, 2008 until the 3rd week of October, 2008. In this study, K-WPPSI, CPS and delay of gratification test were used to measure the effect of the activity. As a result, it can be construed that the Baduk play activity gives children a more positive influence upon their activity and overall IQ, ability of problem- solving and delay of gratification.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.955-959
• /
• 2003

A technique for realizing linear phase IIR filters has been proposed by Powell-Chau which gives a real-time implementation of H(z-1).H(z), where H(z) is a causal nonlinear phase IIR filter. Powell-Chau system is linear but not timeinvariant system. Therefore, that system has group delay response that exhibits a minor sinusoidal variation superimposed on a constant value. In the signal processing, this oscillation seriously degrade the signal quality. Unfortunately, that system has a large sample delay of 4L and also more computational complexity. Proposed system is present a reduced computational complexity technique by moved the numerator polynomial of H(1/z) out to cascade with causal filter H(z) and remain only all-pole of H(1/z), then applied truncated infinite impulse response to finite with truncated IIR filtel $H_L$(z) and L sample delay to subtract the output sequence from the top and bottom filter. Proposed system is linear time invariance and group delay response and total harmonic distortion are also improved.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.269-281
• /
• 2014

In this paper, a systematic design of a low phase noise voltage-tuned dielectric resonator oscillator(VTDRO) using loop group delay is proposed. Designed VTDRO is closed-loop type and consists of a cascade connection of a resonator, phase shifter, and amplifier. Firstly, a reference VTDRO is fabricated and its phase noise and electrical frequency tuning range are measured. Both the phase noise and electrical frequency tuning range depend on the loop group delay. Then, a required value of loop group delay for a new VTDRO with a low phase noise can be systematically computed. In addition, its phase noise and electrical frequency tuning range can be theoretically estimated using those obtained from the measurement of the reference VTDRO. When the loop group delay increases, the phase noise decreases and the electrical frequency tuning range also decreases. The former predominantly depends on the resonator structure. Therefore we propose a systematic design procedure of a resonator with high group delay characteristics. The measured loop group delay of the new VTDRO is about 700 nsec. The measured phase noise of the new VTDRO show a state-of-the-art performance of 154.5 dBc/Hz at 100 kHz frequency offset and electrical frequency tuning range of 448 kHz for a voltage change of 0~10V. The oscillation power is about 4.39 dBm.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.2
• /
• pp.172-178
• /
• 2016

The location template matching (LTM) method is a technique of identifying an impact location on a structure, and is often applied to structural health monitoring and large scale human-computer interface (HCI) systems. The LTM method utilizes a certain measure of similarity between two time signals. The correlation coefficient is most widely used for this purpose, and the group delay based method is recently proposed to improve the accuracy of finding the best matching pair of signals. In practice, one of key essential consideration for implementing the LTM method is to guarantee that a sufficient number of vibration modes must be contained in the measured signal, and yet the lower sampling rate is needed for a real-time implementation. In this paper, the properties of correlation coefficient and group delay with respect to the number of vibration modes are investigated. A few important results are obtained through extensive computer simulations and experiments. If the number of vibration modes contained in the measured signal is more than four it is sufficient for the correlation based LTM method, while the group delay based LTM method requires smaller number of vibration modes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.775-780
• /
• 2004

This paper describes the realization of the Ka-band group-delay equalized filter desisted with the help of a new hybrid method of Simulated Annealing(SA) and Conjugate Gradient(CG), to be employed by the multi-channel Input Multiplexer for a satellite use, each channel of which comprises a channel filter and a group-delay equalizer. The SA and CG find circuit parameters of an 8th order elliptic function filter and a 2-pole equalizer, respectively. Measurement results demonstrate that the performances of the designed component meet the specifications, and validate the design methods.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.609-615
• /
• 2016

Measuring similarity between two signals is a key element of the location template matching (LTM) method which is one of impact source localization technique. As a measure of similarity, the correlation coefficient is most widely used, and the group delay based method is recently proposed to improve the accuracy of finding the impact source. In practice, the LTM method assumes that the similarity between two signals decreases as the distance between two corresponding impact points increases, where the distance between two neighboring impact points defines the grid spacing. In this paper, it is shown that this assumption is not always true but the correlation coefficients fluctuate forming a main robe and many side robes as the distance between two neighboring impact points increases. On the other hand, the standard deviation of group delay sharply increases with a small increase of the grid spacing. These are demonstrated by using a simple cantilever beam. Based on these findings, an optimal way of implementing the LTM method may be suggested by combining the correlation coefficient and the group delay based approaches.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.600-610
• /
• 2001

The effects of group delay and non-linear characteristics on high data rate(HDR) satellite channel are presented in this paper Based on the modeling of group delay and non-linear characteristics the system performances which provide various data rate services were analyzed in Ka-band satellite channel. As the transmission data rate is increased, the degradation due to these channel characteristics is severely increased. The linear component of group delay and the AM-AM component of non-linear characteristics severely affect the system performance. To efficiently provide the various service via the same transmission system it is necessary to equalize the primary impairment factors. The optimum operating points of HDR satellite transmission system are implemented by considering the analyzed results on channel characteristics.

• Archives of Plastic Surgery
• /
• v.34 no.2
• /
• pp.163-168
• /
• 2007

Purpose: The flap delay is a widely used technique to increase the flap survival. Dexamethasone is a well-known drug to have a positive impact on the flap survival. The objective of this study is to investigate the dual synergic effect of epinephrine as a chemical delay agent plus dexamethasone on the TRAM flap survival in rat model. Methods: Forty Sparague-Dawley rats were divided into 4 groups evenly and a right inferior epigastic vessel pedicled TRAM flap, sized $5.0{\times}3.0cm$, was elevated on each upper abdomen. In the control group(N=10), 2 ml saline was injected on transverse abdominis muscle for a week before the flap elevation. In surgical delay group(N=10) all superior pedicles and left inferior pedicle were ligated a week before the flap elevation. In epinephrine group (N=10), 1 : 50000 epinephrine mixed saline was injected to transverse abdominis muscle every day for a week before flap elevation. In epinephrine plus dexamethasone group (N=10), the same procedure as that of epinephrine group was conducted for a week and 2.5 ml/kg dexamethasone was injected transverse abdominis muscle 2 hours before the flap elevation. On the seventh day after flap elevation, the survival area of flaps were measured and the vessel numbers in upper dermis of flap were counted through histologic slides. Results: The results were as follows: the mean percentage of the flap survival area of surgical delay group ($60.5{\pm}2.44%$), epinephrine group ($75{\pm}4.43%$), and epinephrine plus dexamethasone group ($87{\pm}1.94%$) were higher than that of the control group ($35{\pm}6.06%$) significantly(p<0.05). In case of the vessel number though histologic slides, epinephrine group ($79.3{\pm}5.57$) and epinephrine plus dexamethasone group ($96.3{\pm}14.05$) were higher than that of the control group ($44.8{\pm}8.82$) significantly(p<0.05), but the surgical delay group ($54{\pm}4.23$) showed no significant difference (p>0.05) compared to that of the control group. Conclusion: The results indicated that epinephrine plus dexamethasone injection before the flap elevation could be used to increase the TRAM flap survival area in rat model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1143-1153
• /
• 2010

In this paper, we propose an alternative method to increase the distortion cancellation bandwidth of an analog RF feedback power amplifier by using a negative group delay circuit(NGDC). A limited distortion cancellation bandwidth due to the group delay(GD) mismatch discouraged the use of feedback technique in spite of its powerful linearization performance. With the fabricated NGDC with positive phase slope over frequency, the feedback amplifier of the proposed topology experimentally achieved adjacent channel leakage ratio(ACLR) improvement of 15 dB over 50 MHz bandwidth at wideband code division multiple access(WCDMA) downlink band when tested with 2-carrier WCDMA signal. At an average output power of 28 dBm, ACLR of 25.1 dB is improved to obtain -53.2 dBc at 5 MHz offset.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.7
• /
• pp.1-8
• /
• 2000

In this paper, we introduce a modified interference cancellation scheme for multiuser detection in CDMA(Code Division Multiple Access). This detector uses SIC(Successive Interference Canceller) scheme and divides the received signals to reduce the delay time. In this proposed structure, the active users are divided into a number of groups. Within each group, parallel detection is performed to estimate the output signal of that group. The estimated output signal due to that group is then subtracted from the received signal and the resulting residual signal is used for the parallel detection of the next group. This parallel and serial cancellation process is repeated until the last group in the stage is completed. The estimated output signals due to all groups except -th group are MAI for the user signals in -th group. Therefore, the estimated output signals due to all groups except th group are subtracted from the received signal, and then the obtained signal becomes the input signal of -th SIC. The proposed RDSIC (Reduced Delay time of Successive Interference Canceller) has performance and complexity close to the SIC, but with much less detection delay.