• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1288-1295
• /
• 2012

Korea Ministry of Knowledge Economy has estimated that wind power (WP) will be occupied 37% in 2020 and 42% in 2030 of the new energy sources, and also green energies such as photovoltaic (PV) and WP are expected to be interconnected with the distribution system because of Renewable Portfolio Standard (RPS) starting from 2012. However, when a large scale wind power plant (over 3[MW]) is connected to the traditional distribution system, protective devices (mainly OCR and OCGR of re-closer) will be occurred mal-function problems due to changed fault currents it be caused by Wye-grounded/Delta winding of interconnection transformer and %impedance of WP's turbine. Therefore, when Double-Fed Induction Generator (DFIG) of typical WP's Generator is connected into distribution system, this paper deals with analysis three-phase short, line to line short and a single line ground faults current by using the symmetrical components of fault analysis and PSCAD/EMTDC modeling.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.139-150
• /
• 2007

As computer technology has been rapidly advanced, geographic information system (GIS) is recently used in many disciplines. In this study, for a model area in Seoul, seismic hazard potential relating to site effects, which are influenced by the subsurface geotechnical conditions, was estimated using the GIS tool. The distribution of pre-existing borehole drilling data in Seoul metropolitan area was examined for the regional estimation of site-specific seismic responses at the model area. Spatial geo-layers across the entire model area were predicted by constructing a GIS-based geotechnical information system (GTIS). A microzonation of site period $(T_G)$ for estimating site-specific seismic responses at the model area was performed within the GTIS. The spatial microzoning map of $T_G$ indicated seismic vulnerability of two- to four-storied buildings in the model area. Furthermore, a site classification map for determining the design ground motion was established based on the $T_G$ within the GTIS. This informed that most of location in the model area was categorized into current site classes C and D. This seismic microzonation framework for the model area could be applicable particularly in the entire Seoul metropolitan area based on the pre-existing borehole data.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.335-342
• /
• 2004

This paper describes a trans-admittance scanner for breast cancer detection. A FPGA-based sinusoidal waveform generator produces a constant voltage. The voltage is applied between a hand-held electrode and a scan probe placed on the breast. The scan probe contains an 8x8 array of electrodes that are kept at the ground potential. Multi-channel precision digital ammeters using the phase-sensitive demodulation technique were developed to measure the exit current from each electrode in the array. Different regions of the breast are scanned by moving the probe on the breast. We could get trans-admittance images of resistor and saline phantoms with an anomaly inside. The images provided the information on the depth and location of the anomaly. In future studies, we need to improve the accuracy through a better calibration method. We plan to test the scanner's ability to detect a cancer lesion inside the human breast.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.435-444
• /
• 2008

High energy charged particles are trapped by geomagnetic field in the region named Van Allen Belt. These particles can move to low altitude along magnetic field and threaten even low altitude spacecraft. Space Radiation can cause equipment failures and on occasions can even destroy operations of satellites in orbit. Sun sensors aboard Science and Technology Satellite (STSAT-l) was designed to detect sun light with silicon solar cells which performance was degraded during satellite operation. In this study, we try to identify which particle contribute to the solar cell degradation with ground based radiation facilities. We measured the short circuit current after bombarding electrons and protons on the solar cells same as STSAT-1 sun sensors. Also we estimated particle flux on the STSAT-l orbit with analyzing NOAA POES particle data. Our result clearly shows STSAT-l solar cell degradation was caused by energetic protons which energy is about 700keV to 1.5MeV. Our result can be applied to estimate solar cell conditions of other satellites.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.2
• /
• pp.166-179
• /
• 1985

The seasonal distribution and migration of flying squid, Ommastrephes bartrami (LeSueur), in the North Pacific were studied by means of mantle length, surface temperature, and catch and effort data of the Korean drift gillnet fishery from 1980 to 1983. The water temperature for the best fishing ranged from $15^{\circ}\;to\;16^{\circ}C$ in May through July and from $13^{\circ}\;to\;18^{\circ}C$ in August through January. High densities of flying squid were found in the thermal fronts with $18^{\circ}C$ isotherm in August and with $15^{\circ}C$ isotherm in September. The densities of flying squid were higher in the western region than in the eastern region in the North Pacific. The high densities of flying squid in the northwestern Pacific were attributed to the high gradients of oceanographic properties in the region. Migration models for flying squid were hypothesized based on the monthly distributions of catch per unit net, mantle length compositions by statistical blocks, and the hydrographic features of the North Pacific. The large flying squid moved to the northern region and to the central Pacific region earlier than the small sized group in the northward migration period (from June to August). Flying squid begin the reverse southward migration from the Subarctic Frontal Zone in autumn with onset of cooling and the development of Oyashio Current. The large sized group starts their southward return migration from more northern waters than the small sized group but the former moves past the later ana reaches the spawing ground first.

• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.176-185
• /
• 2014

This study deals with the precedents regarding music works among 'The suits to claim an infringement of copyright' and 'Suits to claim indemnification for damage' that have been filed in Korea up so far in order to establish clear criteria to judge plagiarism based on the ground of legal judgment and judge the similarity of two works that have been in controversy previously. The study has been performed through literature review and also precedents. According to the study result, 'criteria to judge music works on plagiarism' are largely classified into (1) creativity, (2) access, and (3) substantial similarity. It is almost the same to judge creativity and substantial similarity. With the components of music works, say, melody, harmony, and rhythm, comparative analysis is conducted. About creativity, the original composer's song is analyzed with another object to be compared whereas about substantial similarity, two songs in controversy get to be analyzed. Regarding the current criteria to judge creativity, it is needed to set the number of objects to be compared which have been regarded similar. And access has limitations in setting up objective criteria for it. Lastly, we should develop digitized criteria for substantial similarity based on the preliminary review system of the Committee on Performance Ethics in the past.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.1 s.53
• /
• pp.45-57
• /
• 2007

The mean shear wave velocity to the depth of 30 m (Vs30) derived from the western Vs is the current site classification criterion for determining the design seismic ground motion taking into account the site amplification potential. In order to evaluate the Vs30 at a site, a shear wave velocity (Vs) Profile extending to at least 30 m in depth must be acquired from in-situ seismic test. In many cases, however, the resultant depth of the Vs profile may not extend to 30 m, owing to the unfavorable field condition and the limitation of adopted testing techniques. In this study, the Vs30 and the mean shear wave velocity to a depth shallower, than 30 m (VsDs) were computed from the Vs profiles more than 30 m in depth obtained by performing various seismic tests at total 72 sites in Korea, and a correlation between Vs30 and VsDs was drawn based on the computed mean Vs data. In addition, a method for extrapolating the Vs profile from shallow depth to 30 m was developed by building a shape curve based on the average data of all Vs profiles. For evaluating the Vs30 from the shallow Vs profiles, both the methods using VsDs and shape curve result in less bias than the simplest method of extending the lowermost Vs equally to 30 m in depth, and are usefully applicable particularly in the cases of the Vs profiles extending to at least 10 m in depth.

• Publications of The Korean Astronomical Society
• /
• v.30 no.1
• /
• pp.11-16
• /
• 2015

First light galaxies have predictable linear clustering, and are expected to produce fluctuations with a characteristic spatial power spectrum, which peaks at an angular scale of ~ 10 arcminutes and in the $1-2{\mu}m$ spectral regions. The Cosmic Infrared Background ExpeRiment 2 (CIBER2) is a dedicated sounding rocket mission for measuring the fluctuations in the extragalactic infrared background light, following up the previous successful measurements of CIBER1. With a 28.5 cm telescope accompanied with three arms of camera barrels and a dual broadband filter on each H2RG (${\lambda}_c=2.5{\mu}m$) array, CIBER2 can measure 6 bands of wide field ($1.1{\times}2.2$ degrees) up to 3 AB magnitudes deeper than CIBER1. This project is leaded by California Institute of Technology/Jet Propulsion Laboratory, collaborating internationally with Institute of Space and Astronautical Science in Japan, Korea Astronomy and Space Science Institute, Korea Basic Science Institute, and Seoul National University. The Korean team is in charge of 1) one H2RG scientific array, 2) ground station hardware and software, 3) telescope lenses, and 4) flight and test bed electronics fabrication. In this paper, we describe the detailed activities of the Korean participation as well as the current status of the CIBER2 project.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.64-73
• /
• 2010

The stagnation of unsold houses is recently aggravated due to domestic and overseas crisis of finance and real-sector economy and domestic housing construction is in serious difficulty. Thus, tax support is necessary for national housing construction. Due to the current tax exemption system of national housing, V.A.T. paid in the construction of national housing is not deducted. Namely, it is ascribed to consumer as it is reflected in the construction cost. This research intends to analyze the limit of V.A.T. tax exemption system, to present the necessity of applying zero rate and to calculate the scale of non-deduction of V.A.T. purchase tax amount for national housing by analyzing the construction site of apartment house of house constructor in order to analyze the effect of zero rate when it is applied on the basis of above ground. In the zero rate system, V.A.T. is not collected from the consumers like the present tax exemption system. However, the purchase tax amount borne in the construction of national housing is deducted totally. As purchase tax is deducted, constructor will promote supplying national housing thanks to the effect of solving financial difficulties and improving liquidity. Since the architecture cost and parceling-out price can be lowered due to the improved liquidity of constructor, the policy will actually help the people without house.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.746-752
• /
• 2016

In this study, soft carbon was prepared by carbonization of carbon precursor (pitch) obtained from PFO (pyrolysis fuel oil) heat treatment. Three carbon precursors prepared by the thermal reaction were 3903 (at $390^{\circ}C$ for 3 h), 4001 (at $400^{\circ}C$ for 1 h) and 4002 (at $400^{\circ}C$ for 2 h). After the prepared soft carbon was ground to a particle size of $25{\sim}35^{\circ}C$, the soft carbon was synthesised by the chemical treatment with boric acid ($H_3BO_3$). The prepared soft carbon were analysed by XRD, FE-SEM and XPS. Also, the electrochemical performances of soft carbon were investigated by constant current charge/discharge test, cyclic voltammetry and impedance tests in the electrolyte of $LiPF_6$ dissolved inorganic solvents (EC:DMC=1:1 vol%+VC 3 wt%). The coin cell using soft carbon of $25{\sim}35^{\circ}C$ with 3903 soft carbon ($H_3BO_3$/Pitch=3:100 in weight) has better initial capacity and efficiency (330 mAh/g, 82%) than those of other coin cells. Also, it was found that the retention rate capability of 2C/0.1C was 90% after 30 cycles.