• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.3
• /
• pp.56-66
• /
• 1990

To investigate the status of irrigation water use and the degree of repeated use of irrigation water, observations for water balance analysis were made during the irrigation periods in 1986 and 1987 crop year. The total area of studied site is 1,441 ha. The site is a major portion of Jedaecheon basin which is located in Bubuk-myeon, Miryang-gun, Gyeongnam Province. The studied area was subdivided into six small blocks. The water balance analysis for these subdivided blocks were carried out considering characteristics of each block. Obtained results are as follow: 1.In mountainous sloppy paddy area(less than 7% slope), the surface inflow was 5A mm/day in average that is one third of the surface inflow into plain paddy area ; 16.7 mm/day. 2.The surface inflows at the vegetative stage and the ripening stage were 15.5 mm/day and 10.4 mm/day, respectively. Those figures were larger than the actual consumptive use at respective same stages ; 13.3 mm/day and 9.2 mm/day, respectively. Whereas, the surface inflow at generative stage was 12.5 mm/day which was less than 14.0 mm/day ; the actual consumptive use. 3.The range of the variation of water storage term was 1 mm/day. This means that there were no change in depth of ponded water on paddy fields. The relationship between the variation of water storage(AS) and the variation of ground water table(H) could be expressed as follow: : AS=0.14H+0.26 4.The ground water inflow: into the transition region ; paddy fields which are located continuously from the mountainous area to the plain area, was larger than the out flow from this region, in general. Rowever, in the plain region where the ground water utilization was predominant, the ground water outflow from this region was larger than inflow: to this region. The relationship between the ground water flow(G2- G1) and the consumptive use in large paddy area(D1-D2) could be expressed as follow: (G2-G1) =0.95(D1-D2) -3.79

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.651-658
• /
• 2004

In this study, we introduced the spiral pipe nailing system (refer as SPN system) with self drilling method, can apply to ground which is hard to keep shape of bore hole, and performed limit equilibrium analysis with simplilied trial wedge method while length ratio and bond ratio were altered to evaluate slope stability considered of tensile strength and bending stiffness. A newly soil nailing system named as the SPN system is respected to reduce displacement of nail and increase global slope stability. And effects of various factors related to the design of the SPN system, such as the type of drilling method and the bit, are examined throughout a series of the displacement-controlled field pull-out tests. 6 displacement-controlled field pull-out tests are performed in the present study and the volume of grouting arc also evaluated based on the measurements. In addition, short-term characteristics of pull-out deformations of the newly proposed SPN system are analyzed and compared with those of the general soil nailing system by carrying out the displacement-controlled field pull-out tests.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.119-130
• /
• 2003

This thesis is results of experimental works on the behavior of the cut-and-cover tunnel. Centrifuge model tests were performed to simulate the behavior of the cut-and-cover tunnels having cross sections of national road and subway tunnels. Model experiments were carried out with changing the cut slope and the slope of filling ground surface. Displacements of tunnel lining resulted from artificially accelerated gravitational force up to 40g of covered material used in model tests, were measured during centrifuge model tests. In model tests, Jumunjin Standard Sand with the relative density of 80 % and the zinc plates were used for the covered material and the flexible tunnel lining, respectively. Basic soil property tests were performed to obtain it's the property of Jumumjin Standard Sand Shear strength parameters of Jumunjin Standard Sand were obtained by performing the triaxial compression tests. Direct shear tests were also carried out to find the mechanical properties of the interface between the lining and the covered material. Compared results model tests estimation with respect to displacements of the lining.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.29-37
• /
• 2012

This study is to find out the characteristics of the behavior of Geosyntehtic Reinforced Retaining Earth Wall(GRREW) through the laboratory experiment with the reduced-scale model, and to verify the effect of reinforcement by materials of GRREW. The loading tests after combining nonwoven geosynthetic, re-bar mesh nets and drainage blocks respectively among the components of the GRREW were performed in three cases of their slopes. In the cases of the behavior analysis including all of the components of the GRREW, the maximum horizontal displacement was generated 8.4mm at the location of 0.57H in the slope of 1:0.3; 3.8mm at the location of 0.57H in the slope of 1:0.6; 3.6mm at the location of 0.86H in the slope of 1:1.0. On average, the horizontal displacements of the GRREW were reduced by 83.8% against those of the original slopes. Lastly, seepage analysis and slope stability analysis were performed by modelling section of field, to confirm the effect of installation of drainage block in GRREW. We can confirm to compare increasing the slope safe factor and decreasing ground water in accordance with drainage blocks.

• Journal of Korean Society of Forest Science
• /
• v.94 no.4 s.161
• /
• pp.243-251
• /
• 2005

This study was carried out to evaluate precipitation, geological and topographical factors from the landslide area occurred in Maeri, Sangdong-myeon, Gimhaesi, Gyeongsangnam-do. The landslide was affected by geo-topographical factors. Talus which is infiltrated easily by runoff was widely distributed in the landslide area. Concave areas on back- and toe-slope were built up colluvial materials and weathered soils. The colluvial materials were consisted of less weathered pebbles and stones (diameter: 10~100 cm) which are easily infiltrated during rainfall events. Also the landslide was mainly affected by an ascending of ground water table which is low in summit and high in toe-slope due to geo-topographical characteristics of the landslide area. The most important reason of the landslide was a lacking of drainage system of ground water despite the high infiltration rates of ground water in talus area during rainfall events.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.314-323
• /
• 2010

Recently, granular soils having a large particle size are frequently used as a filling material in the construction of foundation, harbor, dam, and so on. The shear behavior of this granular soil plays a key role in the stability of structures. For example, soil particle crushing occurring at the interface between structure and soil and/or within soil mass can cause the disturbance of ground characteristics and consequently induce an issues in respect of stability of structures. In order to investigate the shear behavior according to an existence and nonexistence of particle crushing, numerical analyses were conducted by using the DEM(Discrete Element Method)-based software program PFC(Particle Flow Code). Using the crushing model and non-crushing model which were created in this study, numerical analyses of ring shear test were conducted and their results were analyzed and compared. In general, landslide and slope stability are accompanied by a large displacement and consequently not only a peak strength but also a residual strength are very important in the analysis of landslide and slope stability. However the direct shear test which has been commonly used in the determination of shear strength parameters has a limitation on displacement therefore the residual strength parameters can not be obtained. The characteristics of residual shear behavior were investigated through the numerical analyses in this study.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.145-157
• /
• 2017

Because of Recent intensive rainfall, nationally landslides and slope failure phenomenon has been frequently occur. Providing proposed-measures to the natural disasters that occur in these localities and the slope, must be derived ground of strength parameters(shear strength) as a design input data. However, it is such as extra deforestation and a lot of economic costs in order to make the access to the current area and the slopes ground survey is required. Thus, by small dynamic cone penetration test machine using the human to carry in the field, it is possible to easily measure the characteristics and strength constant of the ground of more than one region. In this study through researching analysis of the domestic and foreign small dynamic cone penetration test method, it has proposed a cone material and test methods suitable for the country. Cone penetration test Nc in the field has comparated with analysis of the value and the standard penetration test N value. And, in addition to this, direct shear test and borehole shear test were performed by depth, bedrock, and soil type and passing #200 and the correlation of the Nc value. In particular, in the present study, for the sandy soil that has distict distribute in mountain, it is proposed relation of shear strength corresponding to the Nc value (cohesion and internal friction angle) in order to calculate such effective ground shear strength.

• Journal of Biosystems Engineering
• /
• v.13 no.2
• /
• pp.1-8
• /
• 1988

A scale model of power tiller-trailer system with the same kinematic characteristics was constructed one eighth of the actual size to validate the effectiveness of mathematical model of motion. The parameters for the scale model of power tiller-trailer system were measured by a series of laboratory experiments. Validation tests for the: scale model was conducted under several ground and operating conditions. The tests were performed on artificial ground surfaces with several kind, of slope and obstacle. The travel path of the scale model was photographed successively in three directions. The travel paths obtained from both the film analysis and the simulation model appeared to be consistent with each other. It was concluded that the simulation model could be used to predict the motion of actual power tiller-trailer system if the parameters for actual power tiller and trailer are provided.

• Journal of Ecology and Environment
• /
• v.43 no.3
• /
• pp.297-304
• /
• 2019

Background: The growing wild boar population has become a social issue and its feeding characteristics could affect the physical condition and the plant species composition in the South Korean forests. We aimed to reveal the preference of the wild boar on forest type and site condition as feeding grounds in two cool-temperate forested national parks, Odaesan and Seoraksan, in order to provide information to manage the growing population. Results: The 75 plots (53.6%) out of 140 plots were used as feeding grounds by the wild boar, implying a considerably large population. Especially, the observation frequency as feeding ground was the highest in Quercus forests (73.3%), and it was significantly more preferred than deciduous forest type (44.2%) and coniferous forest type (32.4%) (${\chi}^2=17.591$, p < 0.001). Significantly more and deeper pits were found in Quercus forests. Moreover, high elevation and gentle slope ridge were relatively preferred regardless of forest distribution. Conclusions: South Korean forests are growing qualitatively and quantitatively. Particularly, Quercus forest area has increased markedly, while coniferous forest area has decreased. Since the Quercus forest provides rich food sources for the wild boar, the enlargement of this forest type is expected to increase the wild boar population. The forests located at high elevations have high species diversity, and it is expected that these forests will be greatly affected by the increase in the wild boar population as preferred feeding grounds.

• Korean Institute of Interior Design Journal
• /
• no.40
• /
• pp.42-51
• /
• 2003

This study aimed at understanding the spatial characteristics in the Tugendhat house. For this study, it is need to analyze the early plans of the Tugendhat house design process. To analyze this, the study leads to how to effect on the real practice with the process. Therefore, this research investigates the conceptional design process of the house. There are 2 main characteristics of the interior space alternation. One is the closed spatial character on the 2nd floor, the other is the open spatial character on the 1st floor. It clearly shows the severance between interior and exterior on the 2nd floor. Each 2nd floor's space volume uses different materials so that each the space can show the individuality. On the 1st floor, however, it seems the interior is not as much open to the exterior, because the materiality and reflection of the glass, the objet of furniture and wall. In case of 1st floor, it has a complex concept as open and close character, because it is using the proper gardening elements and the relationship between the house and site. The exterior characteristic is separated the house from the ground with the podium and the slope, and this leads to have the discontinuity. The house clearly shows the spatial characteristics of the continuity and discontinuity, it proves that Mies tried to move onto modem architecture as a turning point.