• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.140-145
• /
• 2005

The existing analytical expression for the voltage between the power and ground plane consist of metal-dielectric-metal board is expressed in the two dimensional infinite series. To reduce the computation time, the two dimensional infinite series is converted to the one dimensional infinite series using the summation formula of Fourier series. We applied these equations to the analysis of voltage between the $9‘{\times}4'$ size power-ground plane. The derived one dimensional infinite series shows the more rapid convergency and the more accurate result than the two dimensional infinite series. This equation can be applied to the power-ground plane analysis which needs a lot of the repeating computation.

• Wind and Structures
• /
• v.26 no.3
• /
• pp.179-190
• /
• 2018

Translation of tornadoes is an important feature in replicating the near-ground tornado flow field which has been simulated in previous studies based on Ward-type tornado simulators using relative motion of the ground plane. In this laboratory investigation, effects of translation on the near-ground tornado flow field were studied using the ISU Tornado Simulator that can physically translate over a ground plane. Two translation speeds, 0.15 m/s and 0.50 m/s, that scale up to those corresponding to slowly-moving tornadoes in the field were selected for this study. Compared with the flow field of a stationary tornado, the simulated tornado with translation had an influence on the spatial distribution and magnitude of the horizontal velocities, early reversal of the radial inflow, and expansion of the core radius. Maximum horizontal velocities were observed to occur behind the center of the translating tornado and on the right side of its mean path. An increase in translation speed, resulted in reduction of maximum horizontal velocities at all heights. Comparison of the results with previous studies that used relative motion of the ground plane for simulating translating tornadoes, showed that translation has similar effects on the flow field at smaller radial distances (~2 core radius), but different effects at larger radial distances (~4 core radius). Further, it showed that the effect of translation on velocity profiles is noticeable at and above an elevation of ~0.6 core radius, unlike those in studies based on the relative motion of the ground plane.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.365-370
• /
• 2000

In this dissertation, in order to analyze the ground plane size which will affect the antenna characteristic, the appropriate antenna was designed and produced in compliance with the needs that the existing antenna should be improved, and then the optimum ground plane size was calculated. It was proved it affected the radiation characteristic greatly but didn't affect the impedance characteristic nearly when ground plane size of the existing folded slot antenna was enlarged with using the copper e cut in some size. Though it require the complicate procedure by the strict design in order to calculate exactly, if it is made of the antenna of the appropriate size that the effect of ground plane can be taken no account, it can be made easily.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.363-368
• /
• 2011

The DGPS transmits the enhancement signal to GPS using the medium frequency band. The NDGPS service that covers the Korean peninsula has been started since 2009. The service area of ocean-based DGPS(maritime-DGPS) reference stations covers the 100NM, but land-based DGPS(land-DGPS) covers 80km service area less than that of maritime DGPS. The DGPS's antenna has the top-loaded monopole antenna type. Top-loaded monopoles are the logical antennas to be used in order to get a low profile antenna and a performance according to the broadcaster and communication needs. The antenna needs to get the ground plane with good conductivity characteristics and flat ground plane without obstacle near to the transmitting antenna. In this paper, the radiation characteristics of an equivalent MF antenna are analyzed in view points of the ground conductivity and the ground plane with obstacle near to the antenna.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.1
• /
• pp.41-44
• /
• 2005

A new method to reduce the computation time in power/ground-plane analysis is proposed. The existing method using the two dimensional infinite series summation take a lot of computation time. The proposed method is based on the approximation of impedance in the frequency domain through the Mobius transform. This method shows the good accuracy and the high speed in computing. In the case of impedance calculation for 9'x4' board, the proposed method takes 0.16 second of computing time whereas the existing method takes 2.2 second. This method can be applied to the analysis and design of power/ground-plane that need a lot of computation steps.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.616-618
• /
• 2009

In this letter, a novel hybrid planar inverted-F antenna (PIFA) with a T-shaped slot on the ground plane is proposed. The loop structure formed by the feed line and shorting pin can be operated as a series and shunt inductance for the PIFA and the T-shaped slot antenna, respectively. The PIFA operates at a frequency of 1.75 GHz, while the T-shaped slot on the ground plane operates at 2.4 GHz by the same voltage feeding source. The height of the PIFA is 6.5 mm, and the size of an upper patch is designed to be 30 mm${\times}$16 mm. The measured relative impedance bandwidth of the PIFA and the T-shaped slot are about 12% and 21%, respectively. In addition, good antenna performance was achieved.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.588-591
• /
• 2004

In this paper, we propose a ground plane detection algorithm, using a new image processing method (IPD). To extract the ground plane from the color image acquired by monocular camera, we use a new identical pixel detection method (IPD) and an edge detection method. This IPD method decides whether the pixel is identical with the ground plane pixel or not. The IPD method needs the reference area and its performance depends on the reference area size. So we propose the reference area auto-expanding algorithm in accordance with situation. And we evaluated the proposed algorithm by the experiments in the various environments. From the experiments results, we know that the proposed algorithm is efficient in the real indoor environment.

• Journal of electromagnetic engineering and science
• /
• v.15 no.4
• /
• pp.199-205
• /
• 2015

An electromagnetic band gap (EBG) metamaterial construction is presented. A construction of a multipath mitigating ground plane, based on the EBG metamaterial is described. A method of the ground plane application and installation, which provides the multipath mitigating without spoiling antenna element phase center stability, is suggested and explained. A designed construction of GNSS antenna module, which contains the multipath mitigating ground plane, made from the presented EBG metamaterial and installed in the described way is shown and parameters of the antenna module are provided.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.44-47
• /
• 2005

This paper presents the efficient plan for the EMI improvement from of TFT-LCD Module. It investigates the frequency characteristics of Power/Ground Plane of TFT-LCD drive circuit PCB concretely. After the frequency characteristics is reviewed, EMI improvement is tried to insert to RC termination between Power/Ground Plane and to shift resonance frequency. It is confirmed by a simulation result and RC Termination which is inserted the point where the resonance characteristics change is necessary. It applied in 19 "SXGA TFT-LCD drive circuits and the EMI improvement verification is described.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.983-988
• /
• 2011

This paper presents a robust method for ground plane detection in vision-based applications based on a monocular sequence of images with a non-stationary camera. The proposed method, which is based on the reliable estimation of the homography between two frames taken from the sequence, aims at designing a practical system to detect road surface from traffic scenes. The homography is computed using a feature matching approach, which often gives rise to inaccurate matches or undesirable matches from out of the ground plane. Hence, the proposed homography estimation minimizes the effects from erroneous feature matching by the evaluation of the difference between the predicted and the observed matrices. The method is successfully demonstrated for the detection of road surface performed on experiments to fill an information void area taken place from geometric transformation applied to captured images by an in-vehicle camera system.