• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.1-9
• /
• 2015

Since logical ground and method to deduct location to install Integrated Standard Controller under development to combine physically and functionally multiple enclosures of controllers for various ITS equipments on streets into one enclosure, there are much difficulty to apply it to site. Particularly we need to establish standardized methodology to deduct optimal location to integrate individual controllers installed dispersedly on streets such as node part and line part. Accordingly this study has the purpose of suggesting more reasonable and efficient methodology to determine location for Integrated Standard Controller to be developed newly. For this, new solution has been searched by using centroid which is utilized to decide facility location in urban planning. As the result of analysis, central point among centroid, in which equal connection to each equipment is possible is proved to be the most reasonable and correct coordinate and zone is proposed as installation location through designating coordinate system. The methodology suggested by this study seems to have high degree of utilization in site according to expansion of integrated standard controller market.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1056-1064
• /
• 2010

This paper presents the approximate analysis method for the symmetric transmission line crossing the aperture in an backplane. The method of moments is used to determine the aperture impedance for the construction of the equivalent transmission line that the aperture impedance apply to the transmission line as the shunt impedance. As the results, the insertion loss increases at the specific frequency range for the impedance matching. In the case of the mismatching, we are confirmed to the insertion gain at the specific frequency. Also the horizontal length of the aperture affects to the transmission line better than vertical length. The measurement of the insertion loss is performed to verify the theoretical analysis.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.2
• /
• pp.33-42
• /
• 2007

위성체 총조립 및 시험(AIT ; Assembly, Integration & Test)을 위한 전기지상지원장비(EGSE ; Electrical Ground Support Equipment)와 위성 임무 준비 및 운용을 위한 관제시스템(MCS ; Mission Control System)의 공동 개발은 미국과 유럽의 위성사업 기관 및 업체에서 지금까지 많은 연구가 되어 왔다. 비록 두 시스템이 다른 목적으로 사용되고 있지만 기술적으로 유사한 기능을 갖는 시스템으로서 많은 공통점과 호환 가능성을 갖고 있다. 두 시스템의 공동 개발은 시스템 개발과 위성 운용 교육 및 준비에 필요한 비용 절감뿐만 아니라 AIT 단계에서 위성운용단계로의 자연스러운 전환이 가능하다. 이는 AIT 단계에서 공통지상시스템 하드웨어 및 운영시스템, 시험/운용 절차서, 위성 데이터베이스의 사전 검증이 이루어지기 때문이다. 또한 위성 운용 요원의 AIT 참여를 통해 공통지상시스템 운용 훈련과 위성 관제 지식 습득이 자연스럽게 이루어 질 수 있다. 이로서 사업 일정과 개발 위험도를 최소화 할 수 있다. 이러한 두 시스템의 공통성과 호환성 및 공통시스템 개발 장점이 있기에 EGSE와 MCS의 공통 기능에 대한 표준화 작업은 1986년 만들어진 COES(Committee for Operations and EGSE Standard)에서 공식적으로 논의되기 시작하여 1994년 CNES와 ESA의 발의로 제정된 ECSS(European Cooperation for Space Standards)를 통해 국제 표준(ISO, CCSDS 등)을 바탕으로 한 지상시스템에 대한 유럽 표준화 작업이 ECSS-E-70 Working Group에서 진행되고 있다. 또한 검증된 지상시스템의 핵심 운영시스템의 소프트웨어 모듈의 재사용을 통해 최근에서 다양한 공통지상시스템이 개발되어 운용되고 있다. 이러한 배경으로 국내에서도 저궤도 위성 개발에서 EGSE 핵심 모듈인 TM/TC 처리 및 Database 관리 모듈을 AIT 단계에서 개발 및 검증 후에 MCS에서의 재사용을 적극적으로 고려하고 있다. 앞으로 국제적인 추세에 따라 AIT 및 지상국간의 기술 및 인력 교류와 핵심모듈 개발을 통한 공통지상시스템 개발의 활발한 전개가 예상된다.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.10
• /
• pp.25-31
• /
• 2010

Anchor, soil nail, micropile have been widely used for slope reinforcement and foundation. These all methods need grouting work after placing reinforcing member. In domestic case, gravity fill techniques and pressure grouting techniques are mainly used. In contrast the pressure re-injection grouting method is not commonly used because grouting equipment and lack of practical application example is short and the verification of reinforcing effect is difficult. Pressure re-injection grouting is a kind of post grouting which technique increases the radial stresses acting on the grout body and causes irregular surface to be developed around bond length that tends to interlock the grout and the ground. In this study, the field test was performed to evaluate the reinforcing effect with the variation of grouting methods and pullout characteristics of reinforcing member placed by pressure re-injection grouting method. The test results showed that the post-grouting methods were useful to increase the pullout capacity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.246-252
• /
• 2014

This study is on the development of 150PS inboard type of compact water jet propulsion system. The water jet is composed of intake, impeller, diffuser, reverse bucket and main shaft. Components of water jet have been manufactured through precision processing after sand casting. Development of water jet propelled engine has been finally completed by processes which are design, production and inspection on each component. The water jet performance characteristics show that 0.29 m3/s of maximum flow rate and 37 m/s of flow velocity have been secured in the ground test pool. Field test was performed by 21ft test ship that water jet propulsion equipment developed in this study was installed. As a result, the weight of hull, engine and other parts of the ship has been almost 1.2 ton and 45 km/h of maximum sailing speed has been recorded with 3700 rpm of engine in the domestic coast test.

• Korean Journal of Human Ecology
• /
• v.20 no.2
• /
• pp.487-503
• /
• 2011

The purpose of this study was to investigate residents' perceptions and attitudes towards Han-Ok based on a study of the characteristics and elements of Han-Ok that experts perceived. For the study, in-depth interviews were conducted and the data of 7 experts and 24 Han-Ok residents were analyzed. The results of the study were as follows. First, the characteristics of spatial arrangements are primarily emphasized and provide emotional stability for the residents. Placement on the ground, a suitable scale, appropriate openings and closures, hierarchical spatial system and a spatial relationship provide a feeling of comfort and protection. Second, the spaces and the materials of Han-Ok are considered the representative elements providing functionality and health. The close relationship between the inside and outside area makes the air naturally circulate and natural materials such as wood, soil, and paper have the function as natural ventilation, heat storage, and in the prevention of various illnesses. Third, residents in modern society put more of a value on experiences of natural environments that are usually impossible in the city. The simple and incomplete characteristics in using color, materials, and form, provide a culture of story telling and a leisurely lifestyle. Fourth, the cold and spatial inconvenience of Han-Ok are solved by partially using modernized equipment and material. The functionality of spatial systems in Han-Ok needs to be promoted in order to change the residents' perceptions of cold in Han-Ok.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.2
• /
• pp.140-147
• /
• 2017

This paper describes the design and implementation of previously developed PMU (Power Monitoring Unit) for LiPB (Lithium-ion Polymer Battery) that is electric propulsion used as unmanned aerial vehicle's power source. Improved PMU provides stable voltage and current to various sensors and elctric motors necessary during flight. Voltage and current monitoring function that is measured by improved PMU more precisely be enhanced and the monitoring channel and temperature sensor is added. To verify the improved performance of the equipment, it is integrated to electric propulsion system of unmanned aerial vehicle. PMU is calibrated through the ground test. And PMU's performance is checked through the flight test.

• The KIPS Transactions:PartD
• /
• v.13D no.2 s.105
• /
• pp.175-182
• /
• 2006

Radars are used to detect the motion of the low flying enemy planes in the military. Radar-detected raw data are first processed and then inserted into the ground tactical C4I system. Next, these data we analyzed and broadcasted to the Shooter system in real time. But the accuracy of information and time spent on the displaying and graphical computation are dependent on the operator's capability. In this paper, we propose the Flying Object Tracking Management System that allows the displaying of the objects' trails in real time by using data received from the radars. We apply the coordinate system translation algorithm, existing communication protocol improvements with communication equipment, and signal and information computation process. Especially, radar signal duplication computation and synchronization algorithm is developed to display the objects' coordinates and thus we can improve the Tactical Air control system's reliability, efficiency, and easy-of-usage.

• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.220-228
• /
• 2005

This study was conducted to investigate the main factors that contain a rotating velocity ratio between wheel and conveyor belt, a tilt angle of conveyor belt and a rotating velocity of a dick cutter for mechanization of Chinese leek harvest. In the survey on the cultivation of Chinese leek, row spacing of 350 m and cutting height of 10 mm from the ground were set up for field tests. Test equipment was designed to cut, pick up and convey Chinese leek one row by one row. From the results of material tests, pick-up height of conveyor belt was set up at $60\~90m$ from the bottom, and the strain and stress at rupture of Chinese leek was 0.487 m/m and 0.01078 MPa. An elastic coefficient of the rubber (Neoprene) of conveyor belts was 1.1077 under the strain of 0.3 nym. from the results of field tests, the tilt angle of conveyor belt was the range of $25^{\circ}\~30^{\circ}$ under consideration far space of container, the velocity ratio between vehicle and conveying belt was 1 to 2.4~1.7 at 0.1~0.3 m/s of vehicle, and optimum rotating velocity of the disk cutter was 34.8 m/s or more under consideration for soil friction.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.172-178
• /
• 2015

The control moment gyroscope(CMG) which is well known as an effective high-torque-generating device is applicable to space vehicles, airplanes, ships, automobiles, robotics, etc. for attitude stabilization and maneuver. This paper deals with the overall details of 100Nm-class CMG development for various industrial applications, and provides the activities and results associated with the CMG system-level requirement analysis, the motor subsystem design/manufacturing/integration, the construction of ground support equipment, and the performance test and evaluation. The performance test reveals that the CMG generates the torque output more than 120Nm in as-designed operation of spin motor and gimbal motor.